Equipment For Sale

John Deere 437D, runs like new, motor rebuild. NEW bearing, all hydraulic valves redone. Grapple replaced. Call for pricing.

NEW 2021 John Deere 640L-II with Lever Steer, Standard Stacking Blade, 4000 Series 2 Speed Winch 17 Hours, Waterford, PA, $285,972

2014 John Deere 703JH New Undercarriage Price Reduced! $80,000 Text 301-351-7306 if interested

John Deere 843K, 7750hrs, in Good Condition, Used Daily, S/N# 654759, REDUCED $79,000 615-763-0137

2014 John Deere 437D

Replacement Windows for John Deere Skidders, Forwarders, Harvesters, Feller Bunchers, Excavators & MORE! Tinted or Clear - Whole Set or Single Piece. Call for pricing and details 715.560.3929 or shop online!

2018 John Deere 859M 7300 hours, dedicated U7L 24" pads, high swing torque, electric hyd tank fill, no timbernaiv, 4.66M power boom, Quadco 2900 intermittent head, all new track slide plates, tight and dry machine, ready to work, 2nd owner. Asking Price $290,000

2018 John Deere 648L 5900+-hrs. 30.5/32 tires all new. Large 17.5sq ft grapple. Machine is in immaculate condition/like new. Completely gone through by John Deere dealer. $155,000 OBO Call or text John 814-598-2141

2007 John Deere 748Glll 9300 hrs on frame with very recent rebuild 30.5 tires with good rubber dual arch winch heat ac runs and operates as it should all functions work right out of production located in central Pennsylvania $58,000 for more info contact Levi at 570-660-8515 or 570-295-7848

2016 John Deere Skidder 648L 9200 hours. $44,000 334-790-3935

John Deere 550C rebuilt engine, torque converter & transmission, 80% U/C, good machine. $19,500 270-774-1658

John Deere 2554 w/4400 Denharco delimber just in for parts.

2015 Kenworth T-880 with Serco loader. Cummins ISX15 550hp deleted with 319k miles. 18 speed trans. Steerable tag. Working daily. 570-510-3952

2008 Kenworth W900, 245,000 miles 7700 hours original, Cat C15 475HP, 8LL Trans, 46 Hendrickson Air Ride, New injectors, main bearings, rod bearings, 2 line wet line system, Drives good, clean southern truck

KILN DIRECT Small Quick Firewood Kilns - 12 Cord Capacity - Nat Gas / Propane, 2x 850,000 BTU/HR. Dries (24) 1/2 Cord Baskets per cycle, large qty of Front Open 1/2 Baskets also available. Kilns only operated 3 1/2 years before decommissioning. 460V 3 phase. Either both or 1 Kiln Available Call for Pricing

9,700 hours Wartah 616c head with topping saw. Under carriage and the oil cooler recently updated. Have some spare head cylinders and a feed wheel motor to go with it. Also includes a burnt parts machine with good track motors,final drives , stick cylinder, and stick boom with tele boom. Good working machine ready for production! Only selling because of downsizing

1970 Kupfermuehle 30" x 7-1/2" Double Surface Planer. Price reduced! $6,500 270-202-3654

L-M Portable Yard Saw Brand New, Still in the original crate! Never Assembled or Used! The Model 200MP-7-SS is powered by a 20HP Honda 4 stroke electric start engine, using a centrifugal clutch to stop the saw chain at idle. • 20HP Electric start, Honda gasoline engine • 4 Stroke quiet engine, straight gas, no mixing • Centrifugal clutch to stop saw chain at idle • Large capacity gasoline fuel tank • 12” Pneumatic or solid rubber tires • Quick tension chain take up assembly • Package capacity 48” high x 64” Wide • This saw has large 8’ blade which was purchased for an additional $1,000 over list price. Standard Features: • 3” Side Shift Travel for easy precise placement • Very rigid and solid construction, built to last • Mounted on three wheels makes for easy moving and no lifting required for the operators • High yield titanium carbide alloy saw bar to ensure longevity • Standard .404 pitch saw chain with 3/8” Kerf • An engineered drive assembly to allow forgiveness, when pinching or binding takes place, which helps avoid chain breakage • Positive locking brake system $15,900 obo - Call 828-779-7102

Lucas Dedicated Slabber Mill 76” (maximum cut) Brand New, Never Used or Assembled , Specification DSM 23, ENGINE 23H/P vertical shaft electric start, V-twin Vanguard, petrol., TRANSMISSION 5” centrifugal clutch, 2 A24 belts, BAR Slabbing bar with harvester sprocket, CUT LENGTH Up to 6.1m in standard form, CUT SIZE 1.9M (6' 4"), $12,000 obo - Call 828-779-7102

2007 Mack GTP719 Granite Triaxle, 58 rears, 18 fronts, Allison Automatic, 374000 miles, 4 piston Bristol Donald, 12x24.5 tires, $90,000