Equipment For Sale

230v WITHOUT CONTROLLER AMPERAGE: 27 AMPS B LINKAGE DEMAGNETIZTION: 2-3 SECONDS GENERATOR POWER:9KW GRYB 36" HYDMAG POWERGRYP MAGNET MAGNET WITH INTEGRATED HYDRAULIC GENERATOR REQUIRED OIL FLOW: 24 GPM AT 2400 PSI REQUIRES HIGH PRESSURE- RETURN- AND CASE DRAIN HYDRAULICS SOLD AS IS VOLTAGE: 230V

.80 CUBIC YARD CAPACITY 4 GENERAL PURPOSE TIPS CATERPILLAR 36" HEAVY DUTY BUCKET CATERPILLAR PART NUMBER 550-9703 COMPATIBLE WITH WainRoy XLS System Couplers FOR USE WITH: Pin Lock Coupler 512-6578 or 514-9167 or Higher P/N GENERAL PURPOSE SIDE CUTTERS PIN LOCK LUGGING SOLD AS IS

2 Speed Travel Air Conditioner Auxiliary Hydraulics Flow - Standard Flow Bucket Coupler Type - Hydraulic Emissions Level - EPA - Tier4 Emissions Level - Japan - 2014 Regulation Heater / Defroster Lighting Online Owner's Manual Product Link Radio - AM FM CD Radio Regulatory Marking Regulatory Status - EPA Certified Ride Control ROPS - Enclosed Self Leveling Tier 1 Compliant Tier 2 Compliant Ultra Low Sulfur Diesel Fuel

1 CUBIC YARD CAPACITY BOLT ON CUTTING EDGE CAT PART NUMBER 514-7639 CATERPILLAR 60" DITCH CLEANING BUCKET FOR PIN LOCK COUPLER PART NUMBERS 512-6578 OR 514-9167 OR HIGHER SOLD AS IS WORKS WITH WAINROY XLS SYSTEM COUPLERS

450x86x60 – E3 tracks. Used Rubber tracks and sprockets. Off CA 289C2.

CATERPILLAR MANUAL PIN GRABBER COUPLER CATERPILLAR MANUAL PIN GRABBER COUPLER PINS INCLUDED SOLD AS IS Works with CATERPILLAR 301.4C / 301.5 / 301.6C / 301.7D/ 301.7DCR / 301.8 / 301.8C/ 301.5 / 301.6 / 301.7CR / 301.8/ 302CR

1998 Caterpillar 525B Grapple Skidder, No Winch, 12,700 Hours, Tires are 30.5 x 32, Good Tread, New Hydraulic Pump, Axle has New Bearings, Center Section is Tight, Front Axle Bearing Replaced, Two Seals in Cylinder Replaced, New Bearings in Cradle, Ready for the Woods. Operating Weight 35,800 lb Overall Length 21.29ft in Overall Width 11.11ft in Height To Top Of Cab 10.61ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

127" WIDE BOLT ON CUTTING EDGE CATERPILLAR 5.5 CYD GP BUCKET PIN ON INTERFACE SOLD AS IS

CATERPIALLR PART NUMBER 536-5315 CATERPILLAR 926-930 QUICK COUPLER COUPLER HYDRAULIC LINES INCLUDED Includes an electro-hydraulic cast coupler actuation system, activated from the cab. Includes lock valve cylinder ISO Standard coupler interface is also used by Volvo SOLD AS IS

2013 CAT 950K, 16,500 hrs., Good machine, tight and dry, rock land forks, ready to work, $65,000

formation Online Owner's Manual

2001 Caterpillar 579 Log Loader with CTR 426 Delimber, 13,000 Frame Hours,, Enclosed Cab with Heat and Air Conditioning,, Meter is Reading 3,400 Hours, Ready for the Woods. Weight 36,480 lb Height 13.5ft in Width 101.3 in Height 161.9 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Have 5 525C model grapple skidders they range in age from 2008 thru 2014 hrs range from 14,000 thru 16,000 all are pulling wood now or have been in the last few weeks. Prices range from $29,500 to $44,500 call for more info

2001 Caterpillar D-6N Dozer, with 9100 Original Hours. Equipped with a 13' Dirt Blade Rake and 6 Way Blade. New Injectors and Exhaust and new Undercarriage with 400 Hours, Ready to Work. Operating weight: 36,610 lbs Width over tracks: 8.18 ft Height to top of cab: 10.12 ft Length of track on ground: 8.37 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Air Conditioner Air Suspension Seat Blade Type - U Engine Enclosures Lighting Online Owner's Manual Regulatory Marking Ripper - Single Shank Ultra Low Sulfur Diesel Fuel

2018 CATERPILLAR 525D GRAPPLE SKIDDER 9,500 HRS WINCH TIGHT GOOD TIRES GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

B LINKAGE ON MACHINE SIDE CAT PART NUMBER 512-6578 CATERPILLAR TILTING PIN LOCK COUPLER COMPATIBLE WITH WAINROY XLS SYSTEM BUCKETS INCLUDES CONNECTING LINES PINS INCLUDED REQUIRES AUXILARY HYDRAULICS SOLD AS IS WORKS WITH 514-763X AND HIGHER P/N PIN LOCK BUCKETS

2.01 CUBIC YARD CAPACITY CATERPILLAR 54" HEAVY DUTY BUCKET CB LINKAGE PENETRATION PLUS TIPS PINS INCLUDED SIDECUTTERS SOLD AS IS

EIK 311-315 33" GRADING BUCKET PINS INCLUDED SOLD AS IS WELD ON EDGE

Auxiliary Hydraulics Flow - Standard Flow Auxiliary Hydraulics Pressure - High Pressure Bucket Coupler Type - Mechanical Emissions Level Hand and Foot Control Heater / Defroster Lighting Online Owner's Manual Pilot Control Radio - AM FM Radio Regulatory Marking Regulatory Status Ride Control ROPS - Enclosed Self Leveling Tier 2 Compliant Ultra Low Sulfur Diesel Fuel