Equipment For Sale
10555 Results Found
Call for Price
Selling a complete Planermill Line -Infeed, tilthoist, landing table, pineapple feed and transfer. -Stetson Ross 6-10-A1 Planer/Moulder c/w assortment of changeable 12 knife side heads can dress up to 6” thick, 8 knife top/bottom heads, 12” wide. Moulder heads with plenty of attachments. -Outfeed Belt, Slowdown Belt, accumulation transfer, lug loader, board turner, Canadian Trimmer with an assortment of trim length stops, trim block belts, green chain and stacking carts. Great planermill, ran 120,000fbm per shift when in production. 600V, 3phase, 60Hz system. Call/text for more details
$ 50,000
2015 Taylor Forklift 11,761 hours. 28,000LB lifting capacity 2 new tires and 2 new batterys. Strong dry machine.
$ 340,000
2022 Tigercat 234B sitting on a 150 LT Big John trailer mounted to it is a ptd264 CSI dilemma with a 4400 CSI slasher saw on 20 foot cradle. Automatic fire suppression a must-have for insurance companies already installed. Our meter reads 609 hours. Asking price $340k all reasonable offers considered 765-505-1338
$ 239,000
2017 Tigercat 625E, 9500 hours, EHS transmission, 45/78x32 front tires at 80%, dueling rings, 28x26 rear tires with 23.1x26 duals at 80%, joystick steering, rotating seat, clock heater, fuel fired pre-heater, LED light package, clean one owner machine. Machine is ready for the woods. $239,000
$ AUCTION ITEM
$ AUCTION ITEM
#275 • 2023 Tigercat LX830E Track Cutter SN: 83074078 Meter reads: 528 hours. ROPS: Enclosed. Heat: Yes. AC: Yes. Self-leveling cab: Yes. Cutter Head Make: Tigercat. Model: ST5702. SN: 57T0930. Blade type: Circle. Cutting capacity: 23". 360 degree head: Yes. Features and Notes: One owner machine. Like new condition.
$ 149,000
Very nice 2019 Tigercat dual arch skidder. Ran through our shop and everything checks out mechanically. All new pins and bushings. New glass. Joystick control. HD axles with 95% Firestones. Deep rubber 30.5s. Equipment financing and delivery available.
$ 120,000
Detailed Description: Freshly painted AND FIXED! DEF deleted, 5502 Bunching Saw, 30.5 tires 75%F/100%R (pics before rear tires replaced), Fresh Engine/Diff/Hyd PMs, Cold AC, New Skid Plate & Bushings, R&R Hoses to Saw w spiral wrap, Rebuilt Cylinders, R&R Rear Eng Mounts. $120,000.
$ AUCTION ITEM
$ AUCTION ITEM
#111 • New 2024 Timber Buddy MP360 Portable Band Mill Meter reads: 0 hours! (NEW) Powered by: Vanguard 23HP Gas Engine. Log capacity: 32" diameter x 16' long. Features and Notes: BRAND NEW! 1-1/2" bands, 19" Band wheels, fully manual, trailer package, Heavy Duty built band mill! 8% sales tax. Contact Myron Nissley with any questions 574-536-2481. Location: 5571 State Route 414, Romulus, NY 14541
$ 55,000
1997 Timberjack 460, New Tires, Runs Good, $55,000 obo or or Trade for a Loader Truck or Skid Loader · 563-599-9191
$ 60,000
2004 Timberjack 360 D Cable skidder 540 John Deere engine New turbo New head New injectors New computer, updated mounting kit. Rebuilt winch, New Diamond chains used once. center pin tight and dry. Good Machine needs nothing. Ready to work! Price Reduced! $60,000 OBO Must Sell!!
$ 30,000
Timberjack 240A, needs nothing, very good condition. $30,000 Located in NJ Call Scott 609-577-3949
$ 36,000
1997 Timberjack 360 Grapple skidder with winch. Engine completely gone through with new main seals, head, and turbo within last few hundred hours. Front axle ring and pinion replaced around 1000 hours ago. Grapple snubber was line bored and replaced few hundred hours ago. Steering valve was replaced with a new Deere valve. Doesn't have A/C but comes with a new heater blower unit for the cab. Has 28l tires that are around 30%. Comes with 4 ice chains and is ready to pull wood. $36000 585-739-1011
2001 Timberking TK711HD Feller Buncher - Cat 3126 Engine, 2nd owner, owned since 2006, 5,000 org. hrs, New bottom chains/sprockets/rollers. A/c, Heat and spare parts $80,000 · Call 732-271-9658
$ 19,500
$ 14,995
Talon 900 Edger, Extremely low hours, used by a hobbyist. The Talon 900 Edger comes fully portable, with six press tires on infeed/outfeed, four side-wind support jacks, and a 27HP power plant for a price that’s about the same as competing, roller-table machines. Specifications: Max Width of Passage 21 inches, Max Cutting Thickness 3 inches, Max Width of Cut 16 inches, Shortest Stock 40 inches, Blade Diameter 12 inches, Arbor Diameter 1.5 inches, Feed Speed Variable, 40-60 FPM, Horsepower 27HP Electric Start V-Twin, Table Height 34 inches, Edger Length 15 feet, Conveyor Length (Infeed) 52 inches, Conveyor Length (Outfeed) 52 inches, Weight 1240 lbs., Price $14,995 OBO - Call 828-779-7102
2021 Timber Pro 725D, 3550 Ryan Dangle head. Well maintained, pins tight, Good condition. Used daily. $350,000 For more details please call 618-922-4016
2018 TimberPro 735C with a New Ryan Dangle Head 50hrs, Well maintained, pins are tight, used daily. Good Condition. For more information call 618-922-4016
Call for Price
$ 235,000
2012 Timberpro 735B, 22" Quadco C 360 rotation, 8450 hours Asking $235,000 Call Jared 216-244-4450
https://www.timberwolfequip.com/pages/firewood-processors Starting at $39,995.95, Pro-MP Series processors are made for customers who want commercial quality but don't want to break the bank. Currently available in 22 HP and 25 HP models, both with the ability to process 24" wide logs and 32' long logs, Pro-MP Series processors are the best wood processors for the money.