logging Equipment For Sale

24 inch Husqvarna bars brand new never been used. $40 plus shipping. We also have chains that go with them 72LPX084 for $25 each. Also we have 9 of the OR90PX45E for $10 each. If interested text Tim 251-366-3237 Kameron 251-242-5493 Gavin 601-394-7796

2019 Eltec 227 Processor, Equipped with a Ponsse HAHD Processor Head, Undercarriage is a D-7 Caterpillar at 70%, Engine Cummins 9.2 with 6,600 Original Hours, Enclosed Cab with Heat and Air Conditioning, more pictures coming soon, Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

This is a chute that came off a 2590 Bandit wood chipper we’re pretty sure. We have welded holes that were worn into it. Asking $500 for the chute. If interested in this chute call Kameron 251/242/5493 Tim 251/366/3237 Gavin 601/394/7796 The chute is being sold from our lumberyard, it is located in State Line, Mississippi, 39362, 467 St Peter St.

2002 Peterbilt 377 Log Truck -3406 E certified rebuilt CAT with warranty -Reman transmission 18 speed -2 rebuilt rear ends -All new breaks -Good tires all the way around -2017 Rotobec elite loader

Pitts Pup Trailer Used for 6 months Good rubber Adjustable bunks Like new

100" MAST 48" TINES INSTALLED 60" WIDE CARRIAGE FOR CATERPILLAR ISO STYLE COUPLER PJB LUMBER YARD FORKS SOLD AS IS

FUSION COUPLER LUMBER YARD FORKS 100" SIDE SHIFT MAST FUSION TINES 1.5X8X48, CARRIAGE 60" WIDE

100" SIDE SHIFT MAST 48" TINES 60" WIDE CARRIAGE ISO LINKAGE PJB SMALL WHEEL LOADER LUMBER FORKS SOLD AS IS

60" CARRIAGE WITH MAST FOR SMALL WHEEL LOADER FUSION INTERFACE PJB LUMBER YARD FORKS SOLD AS IS TINES 1.5"X8"X48"

2000 Poplar Pup Trailer -19k lb. Air ride axles -Good tires -Air pin to lock front axle straight -Good tight turn table -Greased regularly -All new LED lights -Rewired 3 years ago, with minimal use in salt -Removable bunks

2013 Ponnse Ergo Processor, 13,000 Hours on the Engine Mercedes 270 HP Engine, C-4 Crane and H-7 Processor Head, 1000 Hours on Remaned Engine, Outer Boom Chains Replaced New Crane Bearing, Enclosed Cab with Heat and AC, Tracks available Ready for the Woods. Operating Weight 35274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Ponsse Ergo Processor, Includes a H-7 Head purchased from Ponsee, 13,500 Hours on Machine, Machine was refurbished with 3 pages of information, Good Center Section and Tires, Enclosed Cab with Heat and AC, Well Maintained, Tracks Front and Rear. Operating Weight 35,274 lb Shipping Length - Non Tilt 25.2 ft in Overall Width 9.32 ft in Height To Top Of Cab 12.37 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Ponsse Buffalo king -20000 hours -6 cylinder Mercedes -K100+ crane 33’ reach -New crane pump -Compete new center section -New frame lock -New steering cylinders -New extension and jib cylinders New rear differential New brake cans front and rear New rear 750 tires -New 750 tracks came with the machine(1 year old ) -360 super grip bucket -2 new front planetarys -New boom hoses -New boom extensions chains

2000 Ponssee Cobra HS10 Harvester Cat 3116 125 crane Eberspacher Preheater 700/45-22.5 Tires New batteries Work ready

Ponsse Forwarder 2nd Gen Cab (Full Set of Windows) Starting at $4,260 for full set// Crane Side Only Starting at $1100 - Call 715.560.3929

2016 Ponsse Ergo 8 wheel Processor -12,900 hours -C44+ crane -H8 head -New head pump -New drive coupler -Pump gear box rebuilt -New windows -New exhaust -New feed wheel arms -New feed wheels -New knives -Saw motor and complete saw assembly and much more -All work done by Ponsse Ready to work

2008 Ponsse Buffalo Fowarder -17,400 hours -New boom chains -Re- sealed crane pump -Tracks are new -Recently repainted machine -Owner operated and on a job working

2022 Ponsse Bear Processor -2300+ hrs(working) -H8 head -Tires 95% -Tracks 95% -Tight and dry

2019 Ponsse Buffalo Forwarder, Equipped with a K90 Loader, Mercedes Engine with Only 5600 Hours, Enclosed Cab Heat, Air, Radio, 1 Set of Tracks, All Maintenace records, Synthetic Oil 80 AW Hydraulic Oil, Four Bunks, Slide in and out. Ready for the Woods. More pictures coming soon. Weight 46,297 lbs Length 36.91ft in Width Over Tires 9.72ft in Height To Top Of Crane 12.31ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2003 Ponsse Caribou Forwarder, Equipped with 18,000 Original Hours, Mercedes Engine, 12 Ton Double Bunk Forwarder, Enclosed Cab with Heat and Air, One Set of Tracks. 1 New set of chains, Replaced Hydraulic Pump last year, Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.