Feller Bunchers For Sale

2004 John Deere 843H Feller Buncher 11,541 hours Engine replaced approximately 1,000 hours ago 22 inch center post saw head, good teeth 28L-26 tires, at least 50% or better AC and heat work Runs and operates great REDUCED

2012 John Deere 643K 9800 hours Good rubber Cold AC Heat Runs and operates good Using daily REDUCED

2019 DEERE 643L II Wheel Feller Buncher L330 Hours- 4,388 FD55 Head Felling Head- Yes Felling Head Type- Saw 30.5 tires @ 60% HD axles Serial Number- 1DW643LBTJF693605 Clean straight unit!!

2021 JOHN DEERE 853M WITH PROPAC 22' HOT SAW 2,061 HOURS GOOD UNDERCARRIAGE GOOD SAW WITH TWO NEW ROTATE MOTORS FIRE SUPPRESSION MACHINE IS IN EXCELLENT SHAPE INSIDE AND OUT VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2015 John Deere 753J -12000 hours -Uc 90% -Receipts for: -New undercarriage -New swing pump -Swing motor and reliefs on the swing -Hydraulic pumps resealed -Over 60k worth of repairs -Tight and dry

John Deere 653E 8360 hours Mid 90s UC good Hotsaw needs a bearing and some welding Machine does run and operate now but head needs a little work

2018 Deere 859M Feller Buncher, Equipped with Quadco 24B 360 Degree Hot Saw, ONLY 7600 Hours, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 75%, Fire Suppression, NEW Crate Engine Tier 4 9 Liter, New DPF and Sensors, Engine is being replaced due to Low Compression in Cylinder, More Pictures Coming Soon, Ready for the Woods. Length 16.1 ft. Width 10.11 ft. Height 12.10 Weight 79,510 Lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Just out of the shop. We replaced the saw head with a nice FD55. Saw head checks out. New carbide teeth installed. Cylinders packed as needed. Replaced front valve bank. Pins and bushings replaced as needed. Nice clean cutter. Ready to work. Other tires available upon request.

2007 Deere 703G Feller Buncher, Equipped with a FS 20 Cutter Saw Head, Enclosed Cab with Heat and AC Engine was rebuilt around 3,000 Hours ago, 15,000 Frame Hours Undercarriage is 75%, Hi/ Low Range needs some work Ready for the Woods. Weight: 45,325 lbs Length: 13' 7" Width: 10' 7" Height: 11'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 John Deere 753J -10717 hours -Brand new sprockets and idlers -New ecm -Oil pan gasket replaced and rear main seal -New Hydraulic pump no hours on it -21" Quadco 360 head

2016 Deere 853M Feller Buncher with 5,500 hours. Operating Weight 67,704lb Overall Width 10.83 ft in Length Of Track On Ground 12.7 ft in Ground Clearance 31 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 KOMATSU XT430-5 FELLER BUNCHER 4,400 HOURS QUADCO HEAD GOOD UNDERCARRIAGE CUMMINS QSL9 ENGINE 70,000 LB OPERATING WEIGHT VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2016 Komatsu 430 L -6,300 hours -Quadco 22B 360 head -UC 50% -2 idler wheels been done -Few small leaks -Tight machine -Turntable bearing is tight Ready to work

2014 Komatsu 445XT-L Feller Buncher, Machine has 12,000 Hours, Engine is Cummins 8.3 300 HP, Quadco 22" 360 Degree Head, Undercarriage is 75%, Enclosed Cab with Heat and Air Conditioning, Leveling Cab, Ready for the Woods. Weight 72,091 lb Height 14' 1" Width 10' 8" Length 29' 0" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Komatsu Xt 430-3 Feller Buncher -8900 hours -New UC -Fire suppression redone in march -Rebuilt pumps -Rebuilt rotation manifold -TIght and dry -Quadco 22" head(8900 hours) -360 degree tilt Woods ready

2015 Komatsu 931.1, stk# VT19025, 7,957 hours, C144 head, Escanaba, MI, $275,000

2016 Komatsu 430 Feller Buncher, Equipped with a Quadco 22" 360 Degree Wrist, NEW UNDERCARRIAGE, Hours are 8,800, Non Def Engine, Espar Heat, Enclosed Cab with Heat and Air Conditioning, New Swing Bearings, Pump, New Sensor for ICAN, New Starter and Fuel Pump. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Quadco 27B Full service Work ready

One owner, 4400 original hours, excellent maintenance history. Tier-3 engine – NO DEF Quadco Saw 22? with 360 wrist 24? Single Grouser tracks (32” triple grouser available)

2023 KOMATSU XT430-5 TRACKED FELLER BUNCHER QUADCO 22C HEAD CUMMINS QSL9 310HP