Feller Bunchers For Sale

2003 Caterpillar 533 Feller Buncher – 7,732 Hours, $41,000 STK#31828

AM FM CD RADIO BLUETOOTH EPA LABEL FIXED QUADCO 5660 PROCESSOR HEAD LIGHTING Online Owner's Manual PRODUCT LINK Regulatory Marking SAW HEAD ULTRA LOW SULFUR DIESEL FUEL

2020 John Deere 859M, Quadco Saw Head, Only 2,420 Hours, Great Condition and Ready to Work, $470,000 · Call 731-267-2053

John Deere 843K, 7750hrs, in Good Condition, Used Daily, S/N# 654759, REDUCED $79,000 615-763-0137

2015 Tigercat 724G Freshly painted AND FIXED! DEF deleted, 5502 Bunching Saw, 30.5 tires 75%F/30%R, Fresh Engine/Diff/Hyd PMs, Cold AC, New Skid Plate & Bushings, R&R Hoses to Saw w spiral wrap, Rebuilt Cylinders, R&R Rear Eng Mounts. $105,000

Timberking 360 Fellerbuncher-Center post 22 inch hot saw. Runs and operates well

TIMBERPRO MODEL TN735D TRACKED FELLER BUNCHER (NON-LEVELING). CUMMINS ENGINE. DUAL 90CC TRACK PUMPS (CLOSE LOOP DRIVE), 145CC IMPLEMENT PUMP. CONTINUOUS SWING LOHMANN GEAR BOX. HYDROSTATIC TRACK DRIVE SYSTEM. RAD/OIL COOLER W/AUTO REVERSING FANS.HYDROSTATIC CHARGE RELIEF HEATER. HYD TANK VACUUM PUMP.ELECTRIC HYD FILL PUMP. IQAN (MDL) CONTROL SYSTEM VOAC (PARKER)CONTROL SYSTEM. GULLWING ACCESS FOR SERVICING FIRE SUPPRESSION TN735- 10'4" WIDTH W/600 MM TRACK SHOES 45 SECTION D7 UNDERCARRIAGE 600MM SINGLE GROUSER TRACK RAILS SAE CERTIFIED CAB W/3 ESCAPE ROUTES. PRESSURIZED CAB W/FILTERED AIR. AC & HEATER W/CIRCULATION FAN,HORN. AM/FM RADIO W/IPOD INPUT. 1-1/4" FRONT WINDOW. LED LIGHTS. LED LIGHTING. SEATS INC-4-POINT SEAT BELT. 12V CONNECTOR W/AUX POWER. 24V ELECTRICAL SYSTEM W/DISCONNECT. EXHAUST MUFFLER WRAP. TRACK SPEED CONTROL SYSTEM. LOHMANN FORESTRY FINAL DRIVE. EXTENDED REACH FELLER BUNCHER BOOMS W/TOOL TILT. TOP TRACK SLIDES. HARDENED BEARING. HYDROSTATIC SWING. CUMMINS STAGE V ENGINE, 350HP ESPAR HEAT SYSTEM BeGe SEAT REAR MOUNTED CAMERA BACK UP ALARM CELL PHONE HOLDER Berco 600SG D7G HEAVY DUTY SHOES/RAILS. BOOM TREE DEFLECTOR. Disc Saw (HP Pump) w/Lateral PREFORMANCE PACKAGE RED ACCENT COLOR

2021 Timberpro 745D, No Head, 5000 hours, Call for Price

2018 TimberPro TL735D Track Feller Buncher $325000 724-856-2820 6454 hours. Includes more capable Quadco 2900-QU Intermittent Head w/ 29" cut capacity. Built in Ansul fire system. Solid machine, ready to work.

2005 Valmet 425 EXL with 445 EXL bottom and finals, well maintained, 8.3 Cummins, excellent undercarriage, final drives serviced, valve bank resealed, replaced cooling package, factory pressures reset, equipped with a Quadco 360 hotsaw-trades on bulldozer considered. Financing available to qualified buyers.

Barko 775B Cutter 28L x26 tires

1998 BELL SUPER T FELLER BUNCHER ENGINE IS 1 YEAR OLD NEW DRIVE MOTORS NEW TRYGG CHAINS RECENT BACK TIRE VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

1993 Bell Ultra T Track Feller Buncher, Engine Deutz 80 HP Diesel Engine, Hour meter showing 95 Hours,28" Dangle Head Saw, 3/4 " Bar and Chain, Enclosed Cab with heat Joystick Controls, Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1996 Bell Ultra T Feller Buncher, Equipped with a 32" Dangle Head Saw, Tires are 28L x 26 at 80% New Chains, Engine is a Deutz 90 HP with 6000 Hours, New Celunoid for the Fuel Box, Back Up Camera, Saw Motor Rebuilt, Grapple Piston and New Motor for Saw, Has sprocket hook up for 3/4" or 404 Pitch Chain, Tires are 28L x 26 at 80% No tears or rips in the seat, Joystick Controls, Doors Shut and Latch, Fuel Cap Locks,Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1998 Bell Ultra C -6542 hours -Cummins -A/C and heat -Joystick -Recent undercarriage -Converted to track from a tire machine with all bell parts -Head has been looked over -30 inch cut Machine is ready to work PRICE REDUCDED !!!!!!!!!

1996 Bell Ultra T Feller Buncher, Lever Controls, Deutz 80 HP Diesel Engine, Hours Unknown, It had a recon engine at one time, Runnins 28L x 26 Tires, 404 Pitch Chain, Ready for Work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Bell Ultra T 8104 hours Runs and operates good Call for details

2016 CAT 522B, 2700 hrs., Undercarriage good, Quadco HF201B 24” 360 degree rotation, $349,500

Rare Cat Feller Buncher 518 W reversed seating Shear Cutter Only 3950 Hours 3304 Motor 24,4 X 32 Tires Full Set Of Chains 2nd Owner

2015 Caterpillar 541 Buncher 6,785 hrs. New injectors New cam Lifter update New saw blade New saw bearing Runs perfectly Over $30,000 of recent work done on it!