Logging Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 36 of 86
1708 Results Found
Sort By 
Recently Added Items
2010 Tigercat T250B
$150,000
2010 Tigercat T250B
2022 John Deere 748LII
$139,000
2022 John Deere 748LII
2019 Caterpillar 535D
$60,000
2019 Caterpillar 535D
2020 John Deere 437E
$70,000
2020 John Deere 437E
$ 140,000

2020 John Deere 640L2 -3100 hours -Tires are good -Tire chains are good -Cable in good shape -Blade extension

Josh Digirolamo
828-302-7264
Call

$ 105,000

2014 John Deere 1910 -Complete Deere engine has 13,000 hrs -27,000 frame hours -Pumps have 7,000 hrs -Drive motor has 7,000 hrs -New Deere transmission has 7000hrs -Slew bearing and brass has 9000hrs -All cylinders except for one steer cylinder replaced in the last 5000hrs -Extension boom replaced and bucket replaced -Newer front window -A/C and heat work good -7 new Nokian tires in the last 4500hrs tires range from 80-99% -Boogies diffs and planetaries drain clean

Josh Digirolamo
828-302-7264
Call

$ 79,900

2007 John Deere 2054 Harvester with Waratah 622B Head, 17,768 hours, Recent pump, Recent sprocket and rails, New Waratah computer, runs great. Weight 69,187 lbs Length 45 ft 0 in Width 11 ft 10 in Height 10 ft 10 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Colorado Springs, CO
NEF Equipment
855-251-2648
Call

$ 59,900

1985 Deere 540B Cable Skidder with 7,300 Hours. Open Cab, tight center, tires are 23.1 x 26 with good Tread. Ready for the Woods. Weight: 16,472 lbs Length: 18 ft 8 in Width: 9 ft 6 in Height: 9 ft 5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Montpelier, VT
NEF Equipment
855-251-2648
Call

$ 104,500

2014 Deere 748H Dual Arch Skidder, Winch Included Has 3000 Hours on Rebuilt Engine, 12,900 Frame Hours, 4 NEW TIRES, New Cradle Bushing, Arch Cylinder, 30.5 x 32 NEW TIRES, Enclosed Cab with Heat and AC, All Bushings, Arch Pins, Top and Bottom, New Window Glass Ready for the Woods. Operating Weight: 37,540 lbs Overall Length: 26.49 ft Overall Width: 11.59 ft Height to top of cab: 10.26 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Louisville, KY
NEF Equipment
855-251-2648
Call

$ 42,500

1986 Deere 648D Skidder. Good Engine Hours Unknown, Winch Arch Cylinder Repacked, Rebuilt Rear End, 24,5 x32 Tires New Tires on Rear, 50% on Front, Door and Glass Replaced, Complete Transmission Rebuilt Ready for the Woods. Length: 22 ft 7 in Width: 11 ft 0 in Height: 9 ft 8 in Weight: 24,440 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Erie, PA
NEF Equipment
855-251-2648
Call

$ 68,500

2004 Deere 548G-3 Grapple Skidder, Has Winch, 14,700 Hours, Well Maintained, Tires are 28L x 26, Good Tread, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Operating Weight 23,690 lb Overall Length 20.77in Overall Width 9.51ft in Height To Top Of Cab 9.88ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Fairfield, ME
NEF Equipment
855-251-2648
Call

$ 115,000

2006 John Deere 548G3 -12k hours -New glass -Tires have less than 500 hours -Tight and dry -Has a set of good chains -Have a brand-new set will sell for an additional Cost Turn-key Unit!!!!

Josh Digirolamo
828-302-7264
Call

$ 170,000

2012 John Deere 753J -10717 hours -Brand new sprockets and idlers -New ecm -Oil pan gasket replaced and rear main seal -New Hydraulic pump no hours on it -21" Quadco 360 head

Josh Digirolamo
828-302-7264
Call

$ 110,000

2015 John Deere 648H -10,500 hours -Tires are 90 percent -All 4 tire chains are new 3/4 single diamond -Tight and dry

Josh Digirolamo
828-302-7264
Call

$ 90,000

2013 John Deere 437D -11,900 hours -Bucksaw is a 2016 is like new -Just replaced the turbo -Delimber works good with topping saw -Hydraulic landing gear

Josh Digirolamo
828-302-7264
Call

$ 125,000

Very low hours, brand new steps, everything works very well. Ready for somebody to work it. If interested in this machine call Kameron 251/242/5493 Tim 251/366/3237 Gavin 601/394/7796

 State Line, MS
AlaMiss, Inc.
601-848-7811
Call

$ 75,000

Very good tractor, low hours, just needs an operator. If interested in this machine call Kameron 251/242/5493 Tim 251/366/3237 Gavin 601/394/7796 This tractor is located at 467 Saint Peter Street, State Line, MS. 39362

 State Line, MS
AlaMiss, Inc.
601-848-7811
Call

$ 79,900

2017 JOHN DEERE 748LII GRAPPLE SKIDDER 10,150 HOURS WINCH NEW GRAPPLE ROTATOR WITH BEARINGS MOTOR AND GEARS HEAT AND AC GOOD TIRES FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

 Dover, NH
Granite Heavy Equipment and Finance
603-953-5983
Call

$ 44,500

Great machine, fairly used,unit is tight and dry

 Bridgewater, NH
Michael F Sharp Enterprises
603-252-6689
Call

$ 189,500

 Bridgewater, NH
Michael F Sharp Enterprises
603-252-6689
Call

$ 145,000

2011 John Deere 703JH S/N 703JHCA0193726 2021 DS-3550 Ryan's Dangle Saw Head 35" Capacity 43" Bar Long Boom 17000 Frame Hours New Motor And Pumps @12,500 Hours New Air Ride Seat New Joystick 70% U/C

 Southern, IL
Carolina Used Machinery
828-773-2204
Call

$ 195,000

2017 John Deere 1270G -12,500 hours -John Deere 415 Head -Getting head resurfaced and new head gasket -New EGR cooler -Tracks -Tight and dry

Josh Digirolamo
828-302-7264
Call

$ 30,000

Deere FD22B saw head serial number 1DWFD22BPE0020769. This is a complete saw head for sale for your Deere Feller Buncher. Spindle was inspected. Splines are good. We installed a new Quadco disc. You can change from hardened teeth to carbide. Your choice. Financing and delivery available.

 Moncks Corner, SC
W & W Truck & Tractor Inc.
843-312-1018
Call

Call for Price

18445 Hrs Engine Rebuilt at 10,000 Hrs New Hydraulic Pump Last Year All New Cylinders Used Daily

Carolina Machinery Sales, Inc
704-288-1904
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved