Logging Equipment For Sale

2008 Valmet 860.3 Forwarder, Enclosed Cab with Heat and Air Conditioning, 15,100 Frame Hours, Bogies are Good, Tires are 80%, New Computer System, Comes with a set of Eco Tracks. Ready for the Woods. Operating weight 10.5 t Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2000 VALMET 646F DOUBLE BUNK FORWARDER 4 CYL CUMMINS POWERSHIFT JOYSTICK CONTROLS SQUIRT BOOM BYPASS BUCKET 700 HOURS ON NEW MOTOR

(3) Good used bogie axle beams for a Valmet 546 series 2. $800 each. GAF 05 1

Good used harvester pump for a Valmet 911.3 harvester. Part# 5071149

Good used front rear end center differential for a Valmet 546 series 2 forwarder.

2010 VALMET 430FXL FELLER BUNCHER 6,844 HOURS CUMMINS 300 HP ENGINE 68,900 OPERATING WEIGHT 22 INCH HEAD HEAT AND AC GOOD UNDERCARRIAGE FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

Valmet 415 EX parts available

VALMET 646 DOUBLE BUNK FORWARDER 4 CYL CUMMINS POWERSHIFT JOYSTICK CONTROLS EXTENDA BOOM 28L-26 FRT 700/50-26.5 BOGGEYS

MLS Number 9829758 Product Description 2005 Valmet 415EX Tracked Processor 16,000 Hours Sisu Engine New injector pump 30' reach with telescopic outer boom Valmet 370E Processor Head Undercarriage at 60% with new rollers 36" flotation pads Espar Cold Weather Start $40,000 in recent updates. Many hoses replaced. Just off job. Includes spare Valmet 380 head (uses same computer)

Coming Soon-Valmet 445EXL with many updates! All 3 pumps being rebuilt, valve bank reseal with new solenoid’s, engine work, very low hours on new undercarriage, new bearings in final drives and much more! can be equipped with 360 Barsaw or 360 hotsaw

Recently removed rotary manifold for a Valmet 425/445 or 415 EX/EXL. Very good condition

Good used 145cc Rexroth Implement pump to fit Valmet/Timbco 425 and 445

2000 Valmet 921 harvester -370e head -Runs good -Heat/ac -Leveling cab -Replaced the main bearing -Rebuilt measuring wheel -New ac compressor

Newer Valmet EXL/FXL or Komatsu Swing Motor /Gear box

2005 Timbco 425 EXL , 8.3 Cummins Engine-260 hp, many recent updates. Can be equipped with Barsaw Or hotsaw. Getting an updated undercarriage.

Hands-down, no question, the cleanest Valmet 425EX on the market! 4500 hours, meticulous owner with no expense spared in upkeep and maintenance on this machine. Only 1800 hrs on an upgraded 300 hp 8.3 Cummins. Dry, tight and no disappointments. Equipped with a Quadco 22B 360

1994 Valmet 544X Woodstar Series II Forwarder, Single Bunk, NEW ENGINE, Frame hours are 14,700. Center Section is Tight Enclosed Cab with Heat, No Air Conditioning, Bunk Length is 11' Will handle up to 16' Lengths, New Lexan Glass, 12 Speed Transmission, Has Used Transmission Installed Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1997 VALMET 544X SINGLE BUNK FORWARDER 4 CYL FORD POWERSHIFT LEVER CONTROLS BYPASS BUCKET DOES HAVE WEAK TRANSMISSION

2008 Valmet 911.4 Harvester, With 2013 365.1 Processing Head, Engine has 16,000 Hours,Upgrades and new parts in machine includes, -New hydraulic pump, New computer and new screen, valve banks resealed on chassis and crane in 2020, all boom cylinders repacked 2020,New wiring down boom and to head, tilt cylinders repacked,. knife cylinders repacked, center section of valve bank resealed, New spherical ends and pins on knife cylinders, New wiring for measuring wheel, New diameter sensor, both feed roller motors resealed, new head rotator motor, New secondary boom section, New PCX-4 Computer and Screen. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Valmet 840.3, 13,863 hrs., Turbo diesel, 6x6, Differential lock, Valmet CRF 8.1 crane, extendable boom, Bypass Grapple w/rotator, approx. 72" decking blade, EROPS, Joystick controls, Heat/AC, Radio, Maxi monitor, 600/65-34 front tires, 600/55R26.5 rears, $79,500