Logging Equipment For Sale

We have 2 complete bunks for a Caterpillar/Fabtek forwarder. They are for narrow machines like Cat 534/544 or Fabtek 344B/346B. The price is for one complete bunk (2 stakes & 1 base) $1000 each.

2017 Caterpillar Harvester 521B

2019 Caterpillar 568LL -6349 hours -Lugging for Heel Boom Still Attached -UC in good shape -Works as it should

2017 CAT 545D, 9351 hrs., dual arch grapple, a winch, Tires at 75%, and is pretty nice and straight, $79,500

CTR 426, crawler trailer, GLK55 grapple, serviced and ready to work.

2015 Cat 574 8WD Forwarder, 1 Set ofClark Tracks, New Complete Long Block Engine from Cat, Good Rubber, Clean Machine inside and out.

CTR 426, Hydraulic Crawler Trailer, GLK55 Grapple

Transmission out of a Caterpillar 544 forwarder. Funk powershift DF150. Will fit any Fabtek , Timberking , Prentice & Cat forwarder. We also have the torque converter assembly with charge pump that is for sale.Part# 7150

Radiator assembly out of a Caterpillar 544. Radiator , Air to air cooler , Transmission cooler & Hyd. cooler. No leaks. Will fit any Cat & Prentice forwarder with a Caterpillar engine.

1998 Caterpillar 525B Grapple Skidder, No Winch, 12,700 Hours, Tires are 30.5 x 32, Good Tread, New Hydraulic Pump, Axle has New Bearings, Center Section is Tight, Front Axle Bearing Replaced, Two Seals in Cylinder Replaced, New Bearings in Cradle, Ready for the Woods. Operating Weight 35,800 lb Overall Length 21.29ft in Overall Width 11.11ft in Height To Top Of Cab 10.61ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

FACTORY WARRANTY THROUGH 8/5/23 FITS 305-306 CAT NEXT GEN MACHINES INCLUDES 585-0454 JUMPER LINES 5850431 WIRING HARNESS INCLUDES S40 24” HD DIG BUCKET, AND 48” S40 DC/ GRADING BUCKET Online Owner's Manual REQUIRES 570-7210 MULTIFUNCTION JOYSTICKS TRS6 – PART NUMBER 5858423 (PIN ON TOP) S40 BOTTOM WITH GRAPPLE TINES

FUSION INTERFACE INCLUDE: MILLYARD TOP CLAMP AND CONNECTOR LINES FROM COUPLER TO THE TOOL. LOG & LUMBER FORK 72" Online Owner's Manual REQUIRES:3RD VALVE,CONNECTOR LINES FROM MACHINE TO MACHINE TO COUPLER

FOR USE WITH FUSION QUICK COUPLER GRAPPLE AREA: 1.7 M2 2.03 YD2 Online Owner's Manual OVERALL HEIGHT CLOSED-OPEN: 1620MM (64") - 2664MM (105") OVERALL LENGTH: 1981MM (78") TINE LENGTH 1372MM (54") OVERALL WIDTH: 1800MM (70"), INCL. LINES AND "TURN TO CONNECT" QDS REQUIRES: 3RD VALVE ON MACHINE

CAT G126 Contractors Grapple FOR USE WITH: "CB" Linkage FOR USE WITH: PIN ON OR PIN GRABBER COUPLER Online Owner's Manual

1993 Caterpillar 518C Grapple Skidder, 13000 hours, 30.5 x32 Tires at 90% Enclosed Cab with Heat, Center Section is Good, Good Chains New Belts and Batteries, Ready for the Woods. Operating Weight 26,510.6lb Overall Length 18.25in Overall Width 8.67ft in Height To Top Of Cab 9.55ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Caterpillar fairlead with rollers

2013 Caterpillar 568LL Track Log Loader, Machine has NEW ENGINE at a cost of $60,000.00 with 500 Hours Installed by Caterpillar, 11,000 Frame Hours, Undercarriage 75%, Enclosed Cab with Heat and Air Conditioning, Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Caterpillar 525B Grapple Skidder Dual arch No winch 30.5s at 50% Ring chains on front Center is tight Engine and tranny are good New rear end New lift cylinders 11k hours Runs and operates good Semi retiring and no longer needed Stock image. Photos coming soon

Caterpillar 501HD Final Drive in excellent condition

SH56B saw, 30.5 tires