BioMass Equipment For Sale

2006 Bandit 3680 Beast Recycler, C15 cat 545 HP Non-emissions engine with 9284 hours Radio Remote, Magnetic Head Pulley, 5th Wheel, Bandit rebuilt the mill area in 2019. Weight. 62500 lbs. Width. 130 in. Height. 162 in. Length. 528 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Bandit SG40 Stump Grinder, Kohler 38 hp EFI Gas with 238hours, New Belts, 18” diameter x 1/2 thick New Revolution cutterwheel with 47” swing, Adjustable rubber tracks. L 100.5” W 29” H 48” Lbs 1,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Bandit 1850 Whole Tree Chipper Deere 325HP Turbo Engine, Engine had a complete engine rebuild 500 Hours Ago, 360 Degree Grapple Rotation, Heat and Ac in Cab Ac is not hooked up, ONLY 6,100 Original Hours, Joystick Controls. Length 282” Width 102” Height 156” Weight 20,000 lbs.

2017 Bandit Beast 4680T -1800 hours -1050 hp Cat c27 -Spare New Screens -48 tooth mill -New overband magnet -Newer discharge belt

2004 Bandit 1390 15 inch drum chipper with 142 hp Cat tier 3 engine winch lift cylinder (crusher) on top feed wheel. Auto feed, hydraulic swivel and height adjustable discharge chute. New tires, new knives and anvil 4,500 hours LENGTH (CLOSED): 188” LENGTH (OPEN): 218” WIDTH: 81” HEIGHT: 110” WEIGHT: 7,500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Bandit Model 3090 Track Whole Tree Chipper, Only 500 Original Hours, Volvo Turbo 800 HP Diesel Engine, 24" Whole Tree Chipper 26" x 36", 6 Knife Chipper drum, Opening, Air Compressor, Undercarriage is 99%, Radio Remote Control System, 7-1/2' Infeed Conveyor, Hydraulic Discharge Chute for Discharge Ready to Chip. Length: 33’ 6” Width: 11’2” Height: 12’ 3” Weight: 59,000-62,000 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2023 Bandit 2590 Track Whole Tree Chipper, Equipped with a Caterpillar C-18 755 HP Diesel Engine, ONLY 150 Hours, Air Compressor, Radio Remote Control System, 22" Whole Tree Chipper, Infeed Chute is 7.5'' Long, Caterpillar 4 Year Warranty and Bandit 1 Year Warranty in Effect. Ready for the Woods. Width. 10' 2" Height. 12' 8" Length. 38' 5" Weight. 44,000 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 BANDIT 2290 TREE CHIPPER 4,500-5,000 HOURS C-13 440 HP ENGINE GOOD FEED CHAIN HYD CHUTE GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

BANDIT 1850XP CHIPPER Cab No Loader Hours Unknown 3K On 6 Cylinder JD 3 Sets Of Knives PRICE REDUCED

New 2023 BANDIT 1425 14"" Beast Grinder Includes the Following: - Cat C3.4 Engine with 120HP - 25"" Wide Feed - 40 Gallon Hydraulic Tank - 30 Gallon Fuel Tank - Remote Hydraulic Oil cooler & Cover - Standard Bandit Green Paint - NACD Manual Clutch - Radio Kit with Remote - Steel Chain infeed conveyor - Tandem Axle with Air Brakes - Bolt on Aluminum Fenders - Magnetic Head Pulley on Discharge w/ Steel Collector Pan - Non-Adjustable discharge w/ 7' height - Grinder Cutterhead with Rakers - Equipped with double short shingle teeth - Installed: 3"" Diamond Screen - Shipped Loose: 2"" Diamond Screen - Shipped Loose: 4"" Mod Diamond Screen - Shipped Loose: Extra Shingle and Blunt nose teeth 5 YEAR/5000 HR PLATINUM WARRANTY (CAT ENGINES)

2020 Bandit 3680T BEAST Tracked Horizontal Grinder - 1416 Engine Hours - 900 Grinding Hours - Cat C27 w/ 875 HP - PT Fluid Clutch - Remote Control - Automatic Greaser - Automatic Chain Oiler - On-board air compressor - Adjustable Discharge - 36"" Capacity - 30 Tooth Cutter mill This machine was just ran through by the Quality Equipment & Parts Service Department. Bandit dealer of 10 Years. - Infeed Chain: New Headshaft and Tailshaft, new bearings, some new infeed slats - New teeth & rakers on cuttermill - New Screen & Gate - New Poly slide boards on Primary Discharge - New Anvil Bar - On-board air compressor serviced - New grease lines

2006 Bandit 200XP 12 inch disc chipper with 86 hp Cat engine, winch, auto feed, hand crank swivel discharge chute, heavy duty aluminum fenders tool and battery boxes. New knives and anvil excellent condition Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 Bandit 1400 Whole Tree Chipper with 5,800 hours. Diesel Engine with 250 HP. Lots of new parts including a hydraulic overhaul and wiring overhaul. Runs and operates smoothly. Est. GVWR 18,000 lbs. Comes with extra msc. wear items. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Bandit 3090 4,600 hours on the Cat C18 765 HP Engine, Tires are 11R x22.5 length of unit 39'7" width 9'9" Height 12'4" weight 54000 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Bandit Beast Model 3680, Caterpillar Model C-18 765 HP Turbo Diesel with Only 2,300 Original Hours , Magnetic Head Pulley on Discharge Conveyor, , Air Compressor, Wireless Remoter Control,and Tether Cord Control, Autofeed Reverse System, Tri-Axle Unit with Hydraulic Tongue Jack with Air Brakes... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Bandit 2550 Self Propelled Stump Cutter with Deutz 44 HP Diesel Engine, 1,450 Hours, Tether Cord Remote and Wireless Control, Dual Rear Wheels, Hydraulic Swing Speed, Two Speed Drive, Front Grading Blade, Ready for Work. Width: 35” (89cm) Height: 53” (135cm) Length: 120” (305cm) WEIGHT: Approximately 820kg Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Bandit 2290 20” Drum Whole Tree Chipper, 440 Cat Diesel with 3,045 Hours, Tether Remote and New Radio Remote, 5 1/2’ Infeed Conveyor, Babbited Knives, Light Package, Dual Stabilizer... Popular for its great combination of size, production, performance and price, the 20-inch capacity Model 2290 whole tree chipper is a favorite for chipping tops and brushy material, either in traditional logging operations or land clearing projects. Its 24.5-inch by 26.25-inch throat opening easily accepts large diameter, brushy material. Dual feed wheels in Bandit’s unique Slide Box Feed System provide the industry’s best pulling and crushing power, while aggressive chip throwing power fully loads trailers in approximately 35-40 minutes. Length: 21’ 640.08 cm Width: 10’ 2” 309.9 cm Height: 11’ 6” 350.5 cm Weight: 40,000 - 46,000 lbs (18,143.7 - 20,865 kg) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Bandit Beast 4680 Track Horizontal Grinder, Equipped with a Tier 2 CAT C-27 1050 HP Turbo Diesel Engine with 3,500 Hours, Reverse Fan ,Compressor , Magnetic Pulley Head on Shorter Length Discharge Chute , Additional Screens all sizes, Undercarriage 95% Wireless Remote Control with Tether Cord Electric Winch for screen installation... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 3090 BANDIT WHOLE TREE CHIPPER 1,445 TOTAL HOURS GOOD DRUM CAT C-18 ENGINE GOOD FEED CHAIN HYD SHUTE VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN NO PAYMENTS FOR 3 MONTHS WITH GOOD CREDIT GRANITEHE.COM