Harvesters and Processors For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 6 of 7
137 Results Found
Sort By 
Recently Added Items
2017 TimberPro TN725C
$225,000
2017 TimberPro TN725C
2017 John Deere 1270G
$195,000
2017 John Deere 1270G
2014 Ponsse Ergo
Call For Price
2014 Ponsse Ergo
2020 John Deere 853MH
Call For Price
2020 John Deere 853MH
$ 32,500

1998 Rottne SMV with Processor Head, RG81 Crane ,Engine Hours Reading 11.000 Hours, Rebuilt Hydraulic Pump, Enclosed Cab with Heat and Air Conditioning, Good Tires, One Set of Tracks Good Centers Operating Weight - 38,580.9 lb Length 31.5ft in Width Over Tires 9.45ft in Height To Top Of Crane 12.14ft in Ground Clearance 2.25ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Louisville, KY
NEF Equipment
855-251-2648
Call

$ 129,000

12K Hours 561 SP Head New Computer Pre Heater Leveling Rotate Runs Great

Carolina Used Machinery
828-773-2204
Call

$ 145,000

2008 H855 Tigercat -All major components have been done -Engine -Pumps -Rotec Bearing Swing Motor -Gearbox New Outer Feed motors -Waratah 622B -20,000 hrs on Carrier -Under 3500 hrs on all major components. -Lots of spare Waratah parts and spare engine.

Josh Digirolamo
828-302-7264
Call

Call for Price

2018 TIGERCAT 1185 HARVESTER, TH570 HARVESTING HEAD

 Lucasville, OH
Ricer Equipment
740-289-4318
Call

$ 225,000

2018 Tigercat 875 Processor -11909 hours -Waratah HTH623C head -Updated H16 software -Tight and dry machine Work ready

Josh Digirolamo
828-302-7264
Call

$ 449,500

2018 Tigercat 1185, 4353 hrs., TC FPT N67 Tier 4F Engine, rated at (230 KW) 308hp, Tigercat Extreme Duty pump drive, trans., and hydraulically balanced bogie axles, $449,500

 Greenland, MI
Pats Heavy Equipment
906-883-3800
Call

$ 269,500

2013 Tigercat H822C processor with 575 Dangle head, Approx, 10,000 hours, Complete new undercarriage, 1 Owner, Very very Clean, $269,500

 Wakefield, MI
Dalbeck Sales LLC
906-224-1000
Call

Call for Price

2009 Tigercat 822C Processor with 24,000 hours. Includes a Logmax 7000 Processor Head, Machine Runs Stong, Undercarriage 60%, Version 5 Computer, Engine was rebuilt at one time, Heat and Air Conditioning in Cab Ready for the Woods. Operating Weight W/O Attachment 54,000 lb Overall Length 14.59ft in Overall Width 10.93ft in Height To Top Of Cab 10.93ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Keene, NH
NEF Equipment
855-251-2648
Call

$ 159,000

2012 Tigercat 822C Track Harvester with 12,654 hours, Log Max XT7000 processor head. Operating Weight 69,070.9lb Overall Width 11.16ft in Height To Top Of Cab 12.24ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Winchester, VA
NEF Equipment
855-251-2648
Call

$ 315,000

2018 TigerCat H855D -8800+ hours -Waratah 624c head -Tight and dry -Uc in great shape Ready to work

Josh Digirolamo
828-302-7264
Call

$ 189,000

2006 Timbco 425EXL with Logmax 7000 Processor Head, Hours are 8,000.00 Rebuilt Computer Measuring Device, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 85% No Leaks, Tight Machine. Operating Weight 54,002 lbs Height - Top of Cab 12.4 ft Shipping Length - non tilt 14.6 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Columbus, OH
NEF Equipment
855-251-2648
Call

Call for Price

2003 Timbco 425D with Logmax 7000 Processor Head, Enclosed Cab with Heat, Air is starting to go, Cummins 8.3 Engine, Unknown Hours, Undercarriage is around 75% Ready to Work. Length: 21 ft 4 in Width: 9 ft 8 in Height: 12 ft 2 in Weight: 55,235 lbs.

 Columbus, OH
NEF Equipment
855-251-2648
Call

$ 119,000

2000 TIMBCO 425D HARVESTER/PROCESSOR 14,706 FRAME HOURS 8.3 CUMMINS 80% UNDERCARIAGE PUMPS CHECK OUT OK LOG MAX 7000 GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTH DEFERRED PAYMENTS WITH GOOD CREDIT IN-HOUSE FINANCING FOR LOW CREDIT GRANITEHE.COM

 Dover, NH
Granite Heavy Equipment and Finance
603-953-5983
Call

$ 54,900

2001 TIMBERJACK 1270C WHEELED HARVESTER 6 CYL CUMMINS 758HD HEAD 700 RUBBER

 Manton, MI
Lutke Equipment LLC
231-824-9505
Call

$ 45,000

Timberjack 608 Logging Processor Track Machine Timberjack 762C Processor Head

Keith Comeau
704-929-9122
Call

$ 90,000

2005 and 2004 Timberjack 1270D Combo -14000 hours -758HD 4 roller head -Good tires -New parts -Ready to work 2004 1270D or for parts -9000 hours -758 HD head -Needs a few things before it hits the woods -Tons of extra parts -Spare parts head as well

Josh Digirolamo
828-302-7264
Call

$ 89,000

2005 Timberjack 1270D Harvester with 14,000 hours, Includes 758HD 4 Roller Processing Head, Good Tires Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Operating Weight 38,580 lb Transport length 38.05 ft Transport width 9.38 ft Transport height12.27 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 La Crosse, WI
NEF Equipment
855-251-2648
Call

Call for Price

2003 Timberjack 1270D Harvester, John Deere 6068 engine 700 tires waratah H754 head. Operating Weight 38,580 lb Transport length 38.05 ft Transport width 9.38 ft Transport height12.27 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Chatham, MI
NEF Equipment
855-251-2648
Call

$ 460,000

2021 Timberpro 840C -3000+ hours -8.3L Cummins engine -23 Waratah 425 harvester head -Pump April 2024 -Hydraulic cooler April 2024 -Center Pins April 2024 -Computer April 2024 -Body valve rebuilt 2023 -Front Chains good -Rear Chains good -Comes with spare tires -Clam 520 WILL SELL WITHOUT THE HEAD !!!!!! MORE PICTURES COMING SOON!!!

Josh Digirolamo
828-302-7264
Call

$ 299,500

2016 TimberPro TN725C, 7020 original hrs., Rolly 3 XTHP processing head, Woodland computer, Back-up camera, Fire suppression, Cooled Seat, Espar Engine Preheater, Central Greasing, 8.3 Cummins, 2 speed travel, 10'3" wide. 11' tall, 24” double grouser pads, Undercarriage 70% or better Heat/AC, $299,500

 Greenland, MI
Pats Heavy Equipment
906-883-3800
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved