Logging Equipment For Sale

2013 Caterpillar 563C Feller Buncher New Head, Head gasket, and Turbos Prentice SC-57 Cutting Head 9,736 Hours CAB W/A/C 28L-26 Tires SN: CAT0563CTW6300117

2011 Caterpillar 573 Feller Buncher Joysticks Hotsaw No cracks in disc 2000 hours on rebuilt engine 12k frame hours Nice cutter Price Reduced STOCK IMAGE (Photos Coming)

SH56B saw, 30.5 tires

2003 CAT 533 Feller Buncher, 7730 hours, rubber tire, joystick, hot saw. Location Syracuse, NY STK #31828 $25,000

HFW221 center post saw head. The machine has been through our shop. Any leaking cylinders have been repaired. Pins and bushings replaced as needed. Front diff locks repaired. Tight and dry machine. Equipment financing and delivery available.

Rare Cat Feller Buncher 518 W reversed seating Shear Cutter Only 3950 Hours 3304 Motor 24,4 X 32 Tires Full Set Of Chains 2nd Owner

JUST IN – CALL FOR DETAILS 30.5 tires, SC-57 head, Tier 3 engine (no regen)

JUST IN CALL FOR DETAILS

SC-57 saw head 28L tires, cold air, woods ready machine

Unit was (reconditioned) in 2013. Bottom Flail Assembly replaced in 2014. Unit has a remote. CALL FOR DETAILS

Recently replaced the engine

Clark 664 Cable Skidder 353 Detroit Automatic tranny Gearmatic 19 winch Pins are tight 18.4-34 tires Woods ready

F667 Clark ranger Runs and operates good Needs blade cylinder and rear wheel seal replaced Cummins 5.9

Clark Cable Skidder

1988 Clark Ranger 666 Grapple Skidder, Winch, Engine Hours are Unknown, Cummins Engine Overhauled 2 Years Ago, New Updated Transmission Tires are 30.5 x 32, Decent Tread, Center Section is Tight. Operating Weight 21,980 lb Overall Length 20.5 ft in Overall Width 9.25 ft in Height To Top Of Cab 10.38 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1986 CLARK RANGER 665D CABLE SKIDDER 7,574 FRAME HOURS RECENT ENGINE GOOD TIRES GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN NO PAYMENTS FOR 3 MONTHS WITH GOOD CREDIT GRANITEHE.COM

Clark bogie tracks fit 750 -26.5 but could be shortened to fit 710 or 700

2009 CMI C175 Twister, 5000 Hours, FAE Head, Excellent Undercarriage, New Head Bearings. Teeth are 90%, New Head Skid Plates, Just Fully Serviced, No Leaks. A/C

2023 CMI Twister II C175 now in stock! - 173HP Cummins B4.5 Stage V - Equipped with Shearex HM-70SV - Hydraulic Pushbar - 4 Pump Hydraulic System - 15,000 LB Winch Assembly - Push button cab lift with manual override - Backup Camera - Spacious Cabin with AM/FM/Bluetooth Radio - Pressurized Cabin w/ Integrated HD Pre-cleaner - Air ride seat - Resettable breakers on dash panel - ROPS/ FOPS/ OPS Certification - Hydraulic oil filter pump - Steel Undercarriage w/ Single Grouser 22 in. Tracks - D3 Sealed and Lubed track - Dozer type rollers - 3.83 PSI Ground Pressure - 2 Speed Hydraulic Motors w/ 3.85 MPH Max speed - Weight (Crawler Only): 17,411 LBS - Weight (Crawler and Shearex HM-60SV): 20,696 LBS - Fuel Tank: 78.5 Gal. - Hydraulic Reservoir: 29 Gal. - Ground Clearance: 22" - Overall Width (With 22" Pad): 82"

2023 CMI C300 282HP Mulcher Now in stock! - 282HP Cummins B6.7 Tier 4 Stage V - Equipped with Shearex HM-100SV2 Mulching Head - 100" Cutting Width / 118" Total Width - Number of Teeth on Rotor: 36 - Hydraulic Push-bar - 4 Pump Closed Loop Hydraulic System - 15,000 LB Winch Assembly - Push button cab lift with manual override - Backup Camera - Spacious Cabin with AM/FM/Bluetooth Radio - Pressurized Cabin w/ Integrated HD Pre-cleaner - Air ride seat - ROPS/ FOPS/ OPS Certification - Hydraulic oil filter pump - Steel Undercarriage w/ Single Grouser 30 in. Track Pads - D4 Type Seal and grease track - Dozer type rollers - 3.24 PSI Ground Pressure (Crawler Only) - 2 Speed Hydraulic Motors w/ 3.8 MPH Max speed - Weight (Crawler Only): 24,800 LBS - Weight (Crawler and Shearex HM-100): 29,894 LBS - Fuel Tank: 105 Gal. - Hydraulic Reservoir: 43 Gal. - Overall Width (With 30" Pad): 89" 1 Year / 2,000 Hour Warranty on Crawler 2 Year / 2,000 Hour Warranty on Cummins Engine 5 Year / 3,000 Hour Warranty on Cummins Emissions 6 Months Parts Only Warranty