Logging Equipment For Sale

John Deere 648 GIII direct drive transmission-recent clutch work. Removed from running machine.

MLS Number 12606239 2019 John Deere 437E Log Loader 3816 hours 264 Ultra delimber Kodiak trailer Ground saw Clean machine

2019 2154G John Deere processor 9,500 hours Good running condition 622B Waratah head Delivery available at buyer’s expense

2011 John Deere 437D Log Loader -12000 hours -New turbo -Tight and dry -Delimber works good and has topping saw -2016 csi 4400 bucksaw -Hydraulic landing gear

648G, 648G-II/III 1400 REAR DIFFERENTIAL INSPECTED AND RESEALED & REAR DIFFERENTIAL REPAIRED AND READY 648G-II, GIII FRONT 1400 DIFFERENTIAL REPAIRED AND READY YOUR CHOICE OR ALL 3 $5000.00 EACH CALL GAVIN AT 601-410-3416 OR CALL/TEXT TIM 251-366-3237

ARTICULATION DRIVESHAFT TRANS TO PARK BRAKE SN#-685564 1-AT409576 $1250

648L cylinders take out 2- BOOM CYLINDERS AHC20460. $1750.00 EACH 1- BLADE CYLINDER AHC13134 low ser number only

2016 648L SKIDDER PARTS MACHINE LOTS OF GOOD PARTS STILL AVAILIBLE ON IT CALL GAVIN @601-410-3416 OR TIM @251-366-3237 FOR MORE INFO.

AT208006 fan for 643J-843J cutters BRAND NEW FROM JOHN DEERE

H model grapple pins 4- AT172277 $350.00 each. 2- AT356091 $125.00 each

Oscillating universal driveshaft low serial number machine 1- AT412209. $1500.00

REMAN HALF AXLE WITH PLANETARY GEARS SWEDA 20 HOLE AXLE HEAVY DUTYPN# YZ120232 REMAN $5000.00 CALL GAVIN AT 601-410-3416 OR CALL OR TEXT TIM 251-366-3237

John Deere 648 GIII hydraulic pump- good used pump

2007 John Deere 748H grapple skidder, 12’ wide opening, 250 hours on new JD Factory engine, joystick controller, Excellent Condition, 1st Crank Machine! S/N 1DW748HXC9D633075, heat, air & radio, at least 50% on tires, 30.5 tires x 16.6 (ref #117) – Call Amy (928)723-9449

2003 John Deere 748G II, (1) owner skidder, 10’ grapple w/ winch, 10,000+/- hours, good maintenance on pins & bushings, S/N DW748GX597580, about 50% on tires, tire size 30.5 x 16.5 (ref # 117) - Call Rachel 931-797-6284

1996 Deere 540E Cable Skidder with 18,500 Hours, No Heat and Ac in Cab, Center Section is Tight, Tires are 18.4 x 26 Chains around Ready for the Woods. Operating Weight 21,900 lb Overall Length 19.95 ft in Overall Width 9.16 ft in Height To Top Of Cab 9.88 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Deere 859M Feller Buncher, Equipped with a Quadco 2900 Intermittent Head, VI23 ONLY 5900 Original Hours, One Owner Operator, NEW UNDERCARRIAGE, New Saw Disc and Bearings, New Cylinder, Interior Cab with Heat and Air Conditioning Well maintained Weight 35,450 lbs Length 22 ft 0 in Width 10 ft 11 in Height 12 ft 10 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Deere 753G Feller Buncher Hours 14,000, 22" Head with 45% Lateral Tilt, Undercarriage around 35%, 24" Pads enclosed Cab with Heat and Air Conditioning, New Hydraulic Motor on Saw Head, Ready for the Woods Weight 52,995 lbs Length 25 ft 8 in Width 10 ft 4 in Height 11 ft 4 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 John Deere 653E Processor, Machine has 19,500 Hours, New Deere installed at $15,000 Hours, Undercarriage is 65-70%, Enclosed Cab with Heat, AC doesn't work, Has some hydraulic leaks Has a Prentice PF48 Processor Head, Like a Fabtek Head. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.