Logging Equipment For Sale

1997 John Deere 648G Dual Arch Grapple Skidder, Winch, worked Daily, Needs a little TLC, priced to sell!

John Deere 648L Skidder, 4,023 hrs.

2013 JD 648H dual arch grapple skidder, torque converter, all new pins and bushings, new windows, several cylinders repacked, several hoses replaced, we installed 10k hour engine from a JD 748, new wiring harness on engine,, new EGR valve, cold air, no codes, everything works correctly, no leaks. 18k on frame, new TCU serviced with Deere filters. Nice, clean and ready to work! Front tires 80%. Rear tires New, $89,500

2013 JD 648H dual arch grapple skidder, direct drive, less than 1,000 hours on NEW CRATE ENGINE FROM JOHN DEERE. new engine in last year, Recent center and blade pins, no notable slack or leaks, Nice clean skidder, Cold A/C. 80% rubber, Ready to Work, $69,500

2013 JOHN DEERE 748H SKIDDER 13,000 HOURS REMAN ENGINE REMAN TRANSMISSION WINCH NEW FRONT CHAINS VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2012 JOHN DEERE 753J FELLER BUNCHER 18,000 FRAME HOURS 5,000 HOURS ON REMAN ENGINE RECENT BIGFOOT UNDERCARRIAGE 21 INCH 360 DEGREE HOT SAW VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN NO PAYMENTS FOR 3 MONTHS WITH GOOD CREDIT GRANITEHE.COM

2018 Deere 859M Feller Buncher, Equipped with Quadco 24B 360 Degree Hot Saw, ONLY 7600 Hours, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 75%, Fire Suppression, NEW Crate Engine Tier 4 9 Liter, New DPF and Sensors, Engine is being replaced due to Low Compression in Cylinder, More Pictures Coming Soon, Ready for the Woods. Length 16.1 ft. Width 10.11 ft. Height 12.10 Weight 79,510 Lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 John Deere 848H, 10,664 hrs., Nice clean has been thru shop, cylinder packed, swapped a tong, 2 bushings in and serviced it, new exhaust, new A/C compressor, nice solid Skidder with plenty of life, $65,000

1996 JOHN DEERE 540G SKIDDER NEW CENTER PINS NEW BLADE PINS RECENT HEAD ON ENGINE VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2007 Deere 1010D Forwarder, Engine has14,000.00 Hours, Enclosed Cab with Heat and Air Conditioning. New Starter, and Batteries. Ready For The Woods. Length:24 ft 2 in Width:9 ft 6 in Height:10 ft 6 in Weight:34,630 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 John Deere 640g3 -Rebuild on engine has around 600 hrs -Tight and dry -New cable -Tires in good shape -Chains all the way around

1996 JOHN DEERE 648G GRAPPLE SKIDDER 16,287 HOURS WINCH RUNS GOOD CURRENTLY WORKING FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

1996 Deere 648G Grapple Skidder, Winch, 20,000 Original Hours, Runs Strong, Heat and Air, Air is not Working, New Batteries, Tires are 28L x 26, Centers are Tight, Blade Needs Bearings, Ready for the Woods. Length: 23 ft 7 in Width: 10 ft 2 in Height: 9 ft 9 in Weight: 28,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1970 Deere 440 Cable Skidder, Engine was replaced 3 years ago, Newly Rebuilt Front Axle, Rebuilt Steering Cylinder, New Seat ,Steering Wheel, Starter, Tires Rear are 95% Front are 35%, Replaced Center Section, New Paint, Ready for the Woods. Weight: 11,710 lb Height: 103 in Width: 90 in Length: 206 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Good condition

2016 Deere 848L Grapple Skidder, Winch, Engine has 7800 Hours, Tires are 35.5 at 90% Tread, Centers are Tight, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Operating Weight 49,348.3 lb Overall Length 333.4 in Overall Width 140.7 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

PARTS GRAPPLE (John Deere 437E)

2006 Deere 648G-3 Grapple Skidder, Winch, Enclosed Cab with Heat and Air, Rebuilt Engine with 200 Hours, 12,542 Frame Hours, Center Section is Good, Tires with Chains all Around Good Running Machine Ready for the Woods. Weight 32,000 lbs Length 23 ft 7 in Width 10 ft 6 in Height 9 ft 9 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 John Deere 703 JH Wood Processor with a 622 B Warata 3/4 chain main saw and a 404 top saw.Very clean, no leaks and no dents! Just over 10,000 hours working daily. Length: 27 ft 10 in Width: 9 ft 6 in Height: 11 ft 4 in Weight: 52,140 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Single arch 648 with winch. 28L-26 tires 60-70%. Chain front and back. Heat and a/c. Overall decent machine. New rod and packing on arch cylinder. Come check it out. 13k hours runs and shifts great