Logging Equipment For Sale

2016 Komatsu 430 Feller Buncher, Equipped with a Quadco 22" 360 Degree Wrist, NEW UNDERCARRIAGE, Hours are 8,800, Non Def Engine, Espar Heat, Enclosed Cab with Heat and Air Conditioning, New Swing Bearings, Pump, New Sensor for ICAN, New Starter and Fuel Pump. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Komatsu 931XC Processor, Equipped with a C144 Processor Head, 10,800 Hours, New Main Hydraulic Pump, New Fuel Injection Pump, 1 Set of Eco Tracks, a second set of Evo Tracks on Rear, Ready for the Woods. Weight: 48,281 lbs. Width: 9 ft. 1 in Length: 26 ft. 4 in Height: 12 ft. 11 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 komatsu 430xt-3 with 9,700 hours has a Wartah 616c head topping saw. Under carriage and the oil cooler recently updated. Have some spare head cylinders and a feed wheel motor to go with it. As well as a burnt parts machine with good track motors, final drives , stick cylinder, stick boom with tele boom. Good working machine ready for production! Length 25 ft 2 in Width 10 ft 4 in Height 11 ft 9 in Weight 62,240 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Komatsu 845, 3231 hrs., 4 cyl., hydrostatic trans., preheater, Forest King 710/45-26 tires 60%, fixed cab, comes with 1 set of tracks, blade with new cutting edge, $295,000

2014 Komatsu 430-2 Feller Buncher, Equipped with a Quadco 22" Saw Head, Enclosed Cab with Heat and Air Conditioning, Cummins 300 HP Engine with ONLY 8,200 Original Hours, New Batteries, Customer Rebuilt Saw Motor at Cost of $12,000.00, Complete Valve Bank and Celluloid Rebuilt. New PM Service all Fluids, Customer took excellent care of the maintenance on the Komatsu, Ready for the Woods. Length 26 ft 10 in Width 10 ft 8 in Height 11 ft 9 in Weight 64,460 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Komatsu 430-2 Track with a J.P. Skidmore CF22 Processor Head, 6,700 Original Hours, Undercarriage is 80-85%, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods Length 26 ft 10 in Width 10 ft 8 in Height 11 ft 9 in Weight 64,460 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Late Model Komatsu 233 Bar Saw with HD Lowen Wrist

Exceptionally low hours Komatsu PC 400 complete bottom including final drives, drive motors, track, frames, car, body track groups and everything you need to make an incredible track loader

2022 Komatsu 951 Processor with 164 Head, 3000 hours, 2.9% Financing Available for Qualified Buyer

2023 Komatsu 430-5 Hot Saw, 700 hours, Full Komatsu Warranty to 3000 hours, 2.9% Financing Available for Qualified Buyer

2020 Komatsu XT430-5 -5500 hours -Logmax 7000XT -UC 70% -Tight and dry -Downsizing ready to work

2016 Komatsu 430 L -6,300 hours -Quadco 22B 360 head -UC 50% -2 idler wheels been done -Few small leaks -Tight machine -Turntable bearing is tight Ready to work

Quadco 22SC Sawhead

2006 komatsu pc200-7 Waratah 622b processor -Rebuilt pumps about 4100 hours ago -Rebuilt motor about 4100 hours ago -80% under carriage -Sprockets idlers Boom cylinders were all repacked -622B Waratah Processing head -Has new monitor -New head module -New cab module -New saw motor -Machine Runs and works great And is dry Cuts up to 28"

One owner, 4400 original hours, excellent maintenance history. Tier-3 engine - NO DEF Quadco Saw 22" with 360 wrist 32" Triple Grouser tracks (24” available)

LOEWEN 08 FELLING HEAD ROTATOR FITS KOMATSU -3 CONFIGURATION FITS KOMATSU/TIMBCO BAR SAW ATTACHMENTS

6-WHEEL HARVESTER 650/65-26.5 FRON TIRE - 700/70-34 REAR TIRES 2011 KOMATSU 370 24" PROCESSOR/HARVESTOR WITH ROTATING LIKE ATTACHMENT (SN: 370022438), COMPUTERIZED MEASURING FEED ROLS, TOP SAW

2015 Komatsu 855.1, 13,861 hrs., AGCO Turbo diesel engine, 8x8, Diff locks, Komatsu CRF 8.1 crane, extendable boom, supergrip bypass grapple w/rotator, 96" decking blade, EROPS, Heat/AC, Radio, Joystick controls, Maxi Explorer OS, Webasto pre heater, 710/45R26.5 tires, $149,500

2023 Komatsu 430-5 hot saw, 18 hrs., comes with Komatsu Care Package: 3 years or 2000 hrs., (whichever comes first), Komatsu Factory Warranty Package of 2 years or 5000 hrs., 1.9% financing to qualified buyers, $599,900

2019 Komatsu WA380 Loader. 6382 hours. WELL MAINTAINED. LOCATED IN TAZEWELL, VA. CONTACT ZACH KITTRELL FOR MORE INFO. 931-224-0699