Logging Equipment For Sale
2095 Results Found
$ 17,500
2000 Poplar Pup Trailer -19k lb. Air ride axles -Good tires -Air pin to lock front axle straight -Good tight turn table -Greased regularly -All new LED lights -Rewired 3 years ago, with minimal use in salt -Removable bunks
Call for Price
Call for Price
Ponsse Forwarder 2nd Gen Cab (Full Set of Windows) Starting at $4,260 for full set// Crane Side Only Starting at $1100 - Call 715.560.3929
$ 75,000
$ 38,000
1988 Ponsse Buffalo 8 Wheel Forwarder Rebuilt Engine One Valve Bank Rebuilt But Not Installed Parts Machine
Call for Price
New Ponsse Buffalo 8wd Log Forwarder, Best in the industry, give is a call today for pricing.
Call for Price
2012 Ponsse Ergo (8 Wheel) Processor Equipped with a Mercedes 270 HP Engine with 12,500 Hours, C-4 Crane, H7 Processor Head, Enclosed cab with Heat and AC, Wabasto Pre Heater, 710 Tires around,90% on Tracks, 1 set aggressive, other standard tracks, Good Diffs, Boggies and Drivebox, Fire Suppression, 30 Day Parts Warranty. Ready for the Woods..... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 290,000
2019 Ponsse Buffalo King Forwarder -11,500 hrs -2 sets of track -20k in repairs to Def system, new pump etc -Machine in great shape -Well maintained running every day
$ 89,500
2002 Ponsse Caribou Double Bunk Forwarder, Mercedes Engine with around 18,000 Hours, Was run through Ponsse's Service Department several years ago, Enclosed Cab with Heat and AC, Center Section Good One Set of Tracks. Operating weight 12.8 t Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
2019 Ponsse Buffalo King Forwarder, Equipped with 2 Sets of Tracks, Leveling Crane, 11,400 Hours, Fire Suppression, Tires are 75% DEF Engine, Enclosed Cab with Heat and AC, Backup Camera, New Pump, Ready for the Woods Clean Machine Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
2014 Ponsse Wissent Double Bunk Forwarder, Mercedes Engine OM9O904LA with 9,500 Hours, K-70 Crane, Double Squirt Boom (30') Reach, Super Grip Grapple, Ponsse Opti Control, Easy Manouvering in the woods with X8710 x 26 Tires, Wabasto Pre-Heater, Enclosed Cab with Heat and AC, Air Ride Seat, 3 Speed Hydrostatic Transmission, High/ Low Range, All Parts and Service Manuals Ready for the Woods Length 29.7ft in Width Over Tires 9.32ft in Height To Top Of Crane 12.14ft in Ground Clearance 2.12ft in Length Of Bunk Area 14.77ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
2011 Ponsse Ergo Processor, Includes a H-7 Head purchased from Ponsee, 13,500 Hours on Machine, Machine was refurbished with 3 pages of information, Good Center Section and Tires, Enclosed Cab with Heat and AC, Well Maintained, Tracks Front and Rear. Operating Weight 35,274 lb Shipping Length - Non Tilt 25.2 ft in Overall Width 9.32 ft in Height To Top Of Cab 12.37 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
2020 Ponsse Ergo 8W -4200 hours -H8 Head -8-wheeled -Tracks included -1800 hours left on the extended warranty Ready to work!!!!!
Call for Price
2013 Ponnse Ergo Processor, 13,000 Hours on the Engine Mercedes 270 HP Engine, C-4 Crane and H-7 Processor Head, 1000 Hours on Remaned Engine, Outer Boom Chains Replaced New Crane Bearing, Enclosed Cab with Heat and AC, Tracks available Ready for the Woods. Operating Weight 35274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 112,500
2009 Ponsse Elk Forwarder, Equipped with a Newer Set of Tracks, 600 Tires, Low Hour Machine, Has New Module, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Weight 30,864.8 lb Length: 31.91 ft Width over tires: 9.75 ft Height to top of crane: 12.47 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
2004 Ponsse Ergo, H73E Harvester with 22,000 hours, Dry machine, Computer does not work. Operating Weight 35,274 lbs Height - Top of Cab 12.4 ft Overall Width 9.4 ft Shipping Length - non tilt 25.2 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
2011 Ponsse Ergo Processor, Includes a Ponsse H-7 Processing Head, Hours are 17,530, Center Section is Tight, Enclosed Cab with Heat and Air Conditioning, No Tracks, Rotator Rebuild, Ready for the Woods. Operating Weight 35,274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
2012 Ponsse Ergo Processor, H7 Processor, Machine has 17,600 Hours, Main Wiring Harness Replaced, Engine Computer,is New, New Injectors, New Rotator, New Lower Knives, New Water Pump, New Cam Sensor, Enclosed Cab with Heat and AC, New Lower Section on valve bank replaced, Ready for the Woods. Operating Weight 35,274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
2021 Ponsse Scorpion King Processor, 4300 hours, cab bearing replaced 150 hours ago, comes with tracks, uptime kit, ready for the woods, trades welcome. Call for Price