Harvesters and Processors For Sale

2022 Komatsu 931XC Track Unit, Includes C-144 Processor Head Attachment, Computer System, ONLY 2,000 Hours, Pre Heater, Enclosed Cab with Heat and Air Conditioning, Machine is Like New Ready for the Woods. Operating weight 48,281 lbs Transport length 26.31 Transport width 9.8 Transport height12.92 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Komatsu 931XC, 8 wheeled harvester equipped with a C-144 dangle processing head. Has 10,060 hours. Comes with 2 set of tracks, fire suppression system. Machine is work ready. Asking $285,000 603-723-2953

2017 Komatsu 931XC-2 Processor, approximately 8000 hrs., C144 Head, very woods ready, $229,900 Trades Welcome

6-WHEEL HARVESTER 650/65-26.5 FRON TIRE - 700/70-34 REAR TIRES 2011 KOMATSU 370 24" PROCESSOR/HARVESTOR WITH ROTATING LIKE ATTACHMENT (SN: 370022438), COMPUTERIZED MEASURING FEED ROLS, TOP SAW

2013 Komatsu 941.1 Harvester with 10,520 hours. New hydraulic pumps for crane and drive also a new drive motor ar 10,200 hours. Equipped with a Komatsu 370.2 head, overhauled at 9,000 hours. A second 370.2 spare head is included. Operating weight 51,809 lb Transport length 26.5 ft Transport width10 ft Transport height 13 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Komatsu 911.4, 7800 hrs., 6wd 710 tires 370.2 head, $189,000

2006 komatsu pc200-7 Waratah 622b processor -Rebuilt pumps about 4100 hours ago -Rebuilt motor about 4100 hours ago -80% under carriage -Sprockets idlers Boom cylinders were all repacked -622B Waratah Processing head -Has new monitor -New head module -New cab module -New saw motor -Machine Runs and works great And is dry Cuts up to 28"

2006 KOMATSU PC200LC LOGGING PROCESSOR -Rebuilt pumps -Rebuilt motor -80% under carriage -sprockets idlers Boom cylinders were all repacked -622B Warthoug Processing head -has new monitor -new head module -new cab module -new saw motor -Cuts up to 28" timber

2020 Komatsu XT430-5 -5500 hours -Logmax 7000XT -UC 70% -Tight and dry -Downsizing ready to work

2015 Komatsu XT430-3 Logging Processor with 9,700 hours has a Wartah 616c head topping saw. Under carriage and the oil cooler recently updated. Have some spare head cylinders and a feed wheel motor to go with it. As well as a burnt parts machine with good track motors, final drives , stick cylinder, stick boom with tele boom. Good working machine ready for production! Length 25 ft 2 in Width 10 ft 4 in Height 11 ft 9 in Weight 62,240 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Komatsu XT430-3 Processor with Skidmore CF21 Head, Approx. 7300 hrs., Undercarriage @ 70%, Head has Approx. 2500 hrs., $249,950 Trades Welcome

2006 Link-Belt 210 LX Logging Processor Hours 11,263 Equipped with 470 Waratha processing Head Less than a thousand hours on a new hydraulic pump Has big radiator installed Long Pierce built boom Log guarded 18" forestry cab riser Heavy metal roller doors U/C is good Machine and head have been serviced and ready to work. Head has super cut system very fast head knives have all been replaced, machine and head have lots of extras that will go with it.

This is a chute that came off a 2590 Bandit wood chipper we’re pretty sure. We have welded holes that were worn into it. Asking $500 for the chute. If interested in this chute call Kameron 251/242/5493 Tim 251/366/3237 Gavin 601/394/7796 The chute is being sold from our lumberyard, it is located in State Line, Mississippi, 39362, 467 St Peter St.

2019 Eltec 227 Processor, Equipped with a Ponsse HAHD Processor Head, Undercarriage is a D-7 Caterpillar at 70%, Engine Cummins 9.2 with 6,600 Original Hours, Enclosed Cab with Heat and Air Conditioning, more pictures coming soon, Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Ponsse Scorpion Processor, H-7 Head, 12,000 Hours, Good Tires, 710x45x26.5 16 Rims, Enclosed Cab with Heat and Air Conditioning, Eco Tracks, LED Light Package, LED Light Saw Box, Stump Spraying System, Grill Good, Ready for the Woods. Length: 315.7 in Width: 103.5–121.5 in Transportation Height: 146.5 in Minimum Weight: 50,045 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Ponsse Scorpion King Processor, Equipped with H-7 Crane, Engine has 11,500 Hours, One Set of Eco-Tracks, Extra Bar and Chains, Has CT+ 1 Auto Tensioner, Enclosed Cab with Heat and Air Conditioner, Air Condition Just recently done by Ponsse, More Pictures of Interior Coming Soon. Comfort Grips. Weight 49,604 lbs Length 316 in Width 104–112 in Height 147 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 PONSEE SCORPION KING HARVESTER 15,073 HOURS NEW HEAD GOOD TIRES TIGHT PINS AND BUSHINGS WELL MAINTAINED VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2016 Ponsse Scorpin King 13,000 hours, H7 Processing Head. The Ponsse Scorpion King isa wheeled harvester with an 8WD system that's used for forestry work.It's designed to be comfortable and easy to use, with a spacious cabin and a focus on operator safety and ergonomics. Features: Engine:A Mercedes Benz EU stage V/Tier 4 Final engine with 280 horsepower Cabin:A spacious cabin with a rotating seat and storage, and a location in the middle of the machine for better visibility Crane:An overhead forked main boom with a reach of 10 or 11 meters Three hull design:Keeps the cabin level in all conditions Hydraulic system:Separate hydraulic circuits for the crane and harvester head Active Crane management system:Allows the operator to control the harvester head movement instead of individual crane functions Uses: Used for forestry work, such as harvesting timber Weight 51,147 lbs Length: 315.7 in Width: 105.9–121.5 in Height: 146.5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Ponsse Scorpion King Harvester with 11,500 hours. Includes a Ponsse H7 Head. Weight: 51,147 lbs Length: 315.7 in Width:105.9–121.5 in Height: 146.5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Ponsse Scorpion King Harvester, 13,000 hours, H7 R5500 head. Weight: 51,147 lbs Length: 315.7 in Width:105.9–121.5 in Height: 146.5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.