Logging Equipment For Sale

2015 Cat 574 8WD Forwarder, 1 Set ofClark Tracks, New Complete Long Block Engine from Cat, Good Rubber, Clean Machine inside and out.

CTR 426, Hydraulic Crawler Trailer, GLK55 Grapple

Transmission out of a Caterpillar 544 forwarder. Funk powershift DF150. Will fit any Fabtek , Timberking , Prentice & Cat forwarder. We also have the torque converter assembly with charge pump that is for sale.Part# 7150

Radiator assembly out of a Caterpillar 544. Radiator , Air to air cooler , Transmission cooler & Hyd. cooler. No leaks. Will fit any Cat & Prentice forwarder with a Caterpillar engine.

1998 Caterpillar 525B Grapple Skidder, No Winch, 12,700 Hours, Tires are 30.5 x 32, Good Tread, New Hydraulic Pump, Axle has New Bearings, Center Section is Tight, Front Axle Bearing Replaced, Two Seals in Cylinder Replaced, New Bearings in Cradle, Ready for the Woods. Operating Weight 35,800 lb Overall Length 21.29ft in Overall Width 11.11ft in Height To Top Of Cab 10.61ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

FACTORY WARRANTY THROUGH 8/5/23 FITS 305-306 CAT NEXT GEN MACHINES INCLUDES 585-0454 JUMPER LINES 5850431 WIRING HARNESS INCLUDES S40 24” HD DIG BUCKET, AND 48” S40 DC/ GRADING BUCKET Online Owner's Manual REQUIRES 570-7210 MULTIFUNCTION JOYSTICKS TRS6 – PART NUMBER 5858423 (PIN ON TOP) S40 BOTTOM WITH GRAPPLE TINES

FUSION INTERFACE INCLUDE: MILLYARD TOP CLAMP AND CONNECTOR LINES FROM COUPLER TO THE TOOL. LOG & LUMBER FORK 72" Online Owner's Manual REQUIRES:3RD VALVE,CONNECTOR LINES FROM MACHINE TO MACHINE TO COUPLER

FOR USE WITH FUSION QUICK COUPLER GRAPPLE AREA: 1.7 M2 2.03 YD2 Online Owner's Manual OVERALL HEIGHT CLOSED-OPEN: 1620MM (64") - 2664MM (105") OVERALL LENGTH: 1981MM (78") TINE LENGTH 1372MM (54") OVERALL WIDTH: 1800MM (70"), INCL. LINES AND "TURN TO CONNECT" QDS REQUIRES: 3RD VALVE ON MACHINE

CAT G126 Contractors Grapple FOR USE WITH: "CB" Linkage FOR USE WITH: PIN ON OR PIN GRABBER COUPLER Online Owner's Manual

Back half off a Caterpillar 544. Will work for Fabtek 346B & Prentice 2346. Everything in pictures are included. 600mm tires & rims , Fab05 bogie assembly , Frame , Center knuckle , Center bearing & Frame lock cylinder. We also have 2 sets of bunks for sale , so you can turn your 4 wheeler into a 6 wheeler.

Front axle off a Caterpillar 544 forwarder. Will fit Fabtek 344B & 346B , Caterpillar 534 & 544 & Prentice 2344 & 2346 with 23.1X26 & 28Lx26 tires. Part# 6776

2010 CAT 525C Skidder, Newer Model, Runs Very Good, $40,000 - Call Tom: 272-223-1324 or 570-889-3636

2004 Caterpillar 521 Hotsaw Approx 11k hours Great undercarraige Runs and operates good

2010 Cat 525C Dual Arch Grapple, Chains, Clean Machine Inside and Out.

2001 Caterpillar 579 Log Loader with CTR 426 Delimber, 13,000 Frame Hours,, Enclosed Cab with Heat and Air Conditioning,, Meter is Reading 3,400 Hours, Ready for the Woods. Weight 36,480 lb Height 13.5ft in Width 101.3 in Height 161.9 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Have 5 525C model grapple skidders they range in age from 2008 thru 2014 hrs range from 14,000 thru 16,000 all are pulling wood now or have been in the last few weeks. Prices range from $29,500 to $44,500 call for more info

COMPATIBLE W/CAT 563 COMPATIBLE WITH CAT & PRENTICE FELLER BUNCHERS Online Owner's Manual TAKE OFF FROM 563 TAKE OFF FROM CAT 563 FB

CAT transmission rebuild at 7,100 hours 35.5 Tires, 19’ grapple

2020 CAT 535D, 9500 hours

2018 CATERPILLAR 525D GRAPPLE SKIDDER 9,500 HRS WINCH TIGHT GOOD TIRES GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM