Logging Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 62 of 103
2050 Results Found
Sort By 
Recently Added Items
2018 Tigercat 4053
$15,000
2018 Tigercat 4053
Caterpillar 5055
$15,000
Caterpillar 5055
2016 Komatsu XT430-3
$149,500
2016 Komatsu XT430-3
1982 John Deere 440C
$25,000
1982 John Deere 440C
$ 24,990

FUSION COUPLER LUMBER YARD FORKS 100" SIDE SHIFT MAST FUSION TINES 1.5X8X48, CARRIAGE 60" WIDE

 Richmond, VT
Milton CAT
888-626-2715
Call

$ 9,758

60" CARRIAGE WITH MAST FOR SMALL WHEEL LOADER FUSION INTERFACE PJB LUMBER YARD FORKS SOLD AS IS TINES 1.5"X8"X48"

 RICHMOND, VT
Milton CAT
888-626-2715
Call

$ 17,500

2000 Poplar Pup Trailer -19k lb. Air ride axles -Good tires -Air pin to lock front axle straight -Good tight turn table -Greased regularly -All new LED lights -Rewired 3 years ago, with minimal use in salt -Removable bunks

Carolina Used Machinery
828-773-2204
Call

$ 415,000

2020 Ponsse Ergo 8W -4200 hours -H8 Head -8-wheeled -Tracks included -1800 hours left on the extended warranty Ready to work!!!!!

Josh Digirolamo
828-302-7264
Call

$ 190,000

2011 PONSSE ERGO 8 WHEEL HARVESTER 13,500 HOURS UPDATED OPTI H7 HEAD MERCEDES ENGINE PURCHASED FROM PONSSE IN 7/22 REFURBISHED VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

 Dover, NH
Granite Heavy Equipment and Finance
603-953-5983
Call

$ 425,000

2019 PONSEE ELEPHANT KING FORWARDER 7,585 HOURS GOOD TIRES 46,297 OPERATING WEIGHT MERCEDES 275HP ENGINE VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

 Dover, NH
Granite Heavy Equipment and Finance
603-953-5983
Call

$ 79,500

Ponsse Caribou Forwarder, comes with tracks and spare tire, trades welcome, $79,500

 Wakefield, MI
Dalbeck Sales LLC
906-224-1000
Call

$ 400,000

2016 PONSEE SCORPION KING HARVESTER 15,073 HOURS NEW HEAD GOOD TIRES TIGHT PINS AND BUSHINGS WELL MAINTAINED VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

 Dover, NH
Granite Heavy Equipment and Finance
603-953-5983
Call

$ 180,000

2006 Ponsse Buffalo king -20000 hours -6 cylinder Mercedes -K100+ crane 33’ reach -New crane pump -Compete new center section -New frame lock -New steering cylinders -New extension and jib cylinders New rear differential New brake cans front and rear New rear 750 tires -New 750 tracks came with the machine(1 year old ) -360 super grip bucket -2 new front planetarys -New boom hoses -New boom extensions chains

Josh Digirolamo
828-302-7264
Call

$ 166,900

2016 Ponsse Wisent Double Bunk Forwarder, Machine has 10,200 Hours, Encllosed Cab with Heat and Air Conditioning, Center Section is Tight, Ready for The woods. Length 29.7 ft. Width 9.32 ft. Height 12.14 Weight 31,085 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 La Crosse, WI
NEF Equipment
855-251-2648
Call

$ 69,500

2003 Ponsse Ergo Harvester, H73 Processing Head, Enclosed Cab with Heat and Air Conditioning, Center Section is Tight,Has Chains on Front, No Tracks, Well Maintained Machine, More Pictures coming soon, Ready for the Woods. Operating Weight 35,274 lbs Height - Top of Cab 12 ft Overall Width 9 ft Shipping Length - non tilt 25 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Erie, PA
NEF Equipment
855-251-2648
Call

$ 194,900

2013 Ponsse Ergo Harvester, H7 Processor Head, 13,000 Hours, Machine has Enclosed Cab with Heat and Air Conditioning, Good Centers Tracks on Rear, More Pictures Coming Soon Operating Weight 35,274 lbs Height - Top of Cab 12 ft Overall Width 9 ft Shipping Length - non tilt 25 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Saint Paul, MN
NEF Equipment
855-251-2648
Call

$ 295,000

2019 Ponsse Buffalo, 6871 hrs., on its way to shop, AC, stacking blade, heavy duty axles, comes w/1 set of tracks, $295,000

 Greenland, MI
Pats Heavy Equipment
906-883-3800
Call

$ 139,500

2012 Ponsse Ergo, 17,600 hrs., Trellburg 710-45-26.5 tires 50-70% , New Rotator, bottom knives ,length and diameter sensors, ,a new wiring harness on the motor, and to starter, new PLD, New webasto preheater, New belt/pulley for water pump, all 6 pumps are new, $139,500

 Greenland, MI
Pats Heavy Equipment
906-883-3800
Call

$ 395,000

2021 Ponsse Buffalo, 3152 hrs., stacking blade, 8x8, heavy duty axles, comes w/1 set of tracks, $395,000

 Greenland, MI
Pats Heavy Equipment
906-883-3800
Call

$ 415,000

2023 Ponsse Buffalo -750 hours -Tight and dry -16 ton carrying capacity -Active crane -K100+ loader -Supergrip 360s grapple -Tracks not included OPTIONS LIST IS IN PICTURES ABOVE!!!!!

Josh Digirolamo
828-302-7264
Call

Call for Price

2013 Ponnse Ergo Processor, 13,000 Hours on the Engine Mercedes 270 HP Engine, C-4 Crane and H-7 Processor Head, 1000 Hours on Remaned Engine, Outer Boom Chains Replaced New Crane Bearing, Enclosed Cab with Heat and AC, Tracks available Ready for the Woods. Operating Weight 35274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Mount Pleasant, MI
NEF Equipment
855-251-2648
Call

$ 174,900

2011 Ponsse Ergo Processor, Includes a H-7 Head purchased from Ponsee, 13,500 Hours on Machine, Machine was refurbished with 3 pages of information, Good Center Section and Tires, Enclosed Cab with Heat and AC, Well Maintained, Tracks Front and Rear. Operating Weight 35,274 lb Shipping Length - Non Tilt 25.2 ft in Overall Width 9.32 ft in Height To Top Of Cab 12.37 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Albany, NY
NEF Equipment
855-251-2648
Call

$ 124,900

2012 Ponsse Ergo Processor, H7 Processor, Machine has 17,600 Hours, Main Wiring Harness Replaced, Engine Computer,is New, New Injectors, New Rotator, New Lower Knives, New Water Pump, New Cam Sensor, Enclosed Cab with Heat and AC, New Lower Section on valve bank replaced, Ready for the Woods. Operating Weight 35,274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Chatham, MI
NEF Equipment
855-251-2648
Call

$ 143,900

2011 Ponsse Ergo Processor, Includes a Ponsse H-7 Processing Head, Hours are 17,530, Center Section is Tight, Enclosed Cab with Heat and Air Conditioning, No Tracks, Rotator Rebuild, Ready for the Woods. Operating Weight 35,274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 La Crosse, WI
NEF Equipment
855-251-2648
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved