Equipment For Sale

PRO-EDGE TECHNOLOGY SQUEEZETIGHT CASE CLAMP (AUTOMATIC FEED THROUGH): -- Specifications:The SqueezeTight automatic hydraulic case clamp does the work for you. The vertical pressing system with motors & independently controlled crossbars move according to the size of the piece to be pressed, mobile parts slide along linear bearings and guides. -- Operating Cycle;Once the piece of furniture is assembled on the preparation bench the operator starts the automatic cycle and the carcass enters the machine.The reading devices automatically determine the length and height of the workpiece and send this information to the PLC which positions the mobile head and the conveyor and stops the carcass in position. The beam automatically moves to the preset position.Each of the mobile heads are fitted with: (2) RH & (2) LH Horizontal pressure beams + (4) stationary & (1) adjustable top pressure clamps.The Clamping Cycle is 100% programmable & pressing is by a 10 HP (7.5 kW) Hydraulic pump system.The in-out-cross transfer powered belt conveyors are driven by "SIEMENS" AC brushless motors. -- Working Capacity:9.8" - 89.7" (250 - 2,280 mm) working width/length, 9.8" - 42.9" (250 - 1,090 mm) working height, 9.8" - 25.9" (250 - 660 mm) working depth. -- Positioning Speed:32.8 - 131.3 FPM (10 - 40 MPM) Variable speed controlled by programmable inverter. -- The carcass transfer system is located at the bottom of the bed and consists of an electro-welded steel structure on which a closed loop belt is driven by an inverter-controlled "SIEMENS" motor. -- Operator Interface:Automatic cycle control from onboard "HMI" Touch Screen control + "DELTA" VFD's & PLC with adjustment for all clamping aspects. Clamping pressure strength up to 1,200 PSI over-all. -- Complete with:(1) 98" Long powered in-feed conveyor belt with alignment guideways, (1) 98" Long powered cross-feed conveyor belt with alignment guideways & (1) 98" Long powered out-feed conveyor belt. Parameter Safety Light Curtain System. -- NOT included:Cost for Delivery, installation, and training (please call for quotes). -- Actual Model is PRO-EDGE TECHNOLOGY SQUEEZETIGHT

Producto Gothic Fence & Post Picket Machine. Out and Ready to ship. Producto is now Global Marketing Group.

4-Station Profile ShaperSpecifications: -- 6" Chain drive with non-marking rubber top pads traveling on a hardened and ground precision dia. 5/8" round rods, Top pressure beam driven, Heavy duty fabricated transporter frame, Forward and reverse mode and block mode for creating sanding tools -- Precision X & Y axis mounting stands, 60° rotating tilt on mounting stands with positive lock, Independent activation control at each station, Adjustable infeed fence system, All dust hoods and guards, 2 HP AC variable speed gear drive 5 to 60' per min.Workstation 1: 3.5 HP TEFC Saw Arbor Motor, 1" Dia. Spindle, Dust Hoods with 4" outlet, Mounted on precision X & Y slides Workstation 2 & 3 - Belt Sanding Unit: 2 HP AC motor drive, Air belt tension system, Independent belt tracking system, Air activated sanding pad with touch control, 2" sanding belt width, Guards and Dust hoods with 4" outlet Workstation 4 - Wheel Sanding Unit: 3" HP variable speed (0-3,400 RPM) AC TEFC drive motor, 1" or 1.25" arbor 3.5" long, Dust Hood with 4" dia. outlet, Mounted on precision X & Y slidesSPECIAL NOTE: Needs New PLC or wire for traditional controlsNOTE: Above specs are taken from literature and thought to be accurate.

PROFILEMATIC 503 PROFILE SANDER3-Head feed through, sands from top at adjustable angles narrow moulding type parts as well profiled edges on panels.Equipped with: -- (3) Top VPS vibrating air-loaded sanding units, 0.5 HP vibrating motor ea., sanding heads have (2) pneumatic cylinders for sanding pressure control and oscillate with 1/2" stroke on dust-protected round guides, variable vibration speed from 200 - 1,800 RPM; adjustment range of 120ø to conform to profile, equipped with air shower to clean workpiece & sandpaper automatically. -- Part transport is achieved by a 4-1/2" wide linatex coated conveyor belt system, "quick adjustment" holddown wheels & fence system, variable feed speed 0 - 35 FPM powered by a 0.25 HP DC gear drive (forward & reverse feed mode). -- Each sanding head with its own controls for manual raise & lower, pressure control and vibrating speed. Profile width approx. 1/2" min. to 4" max., material feed through thickness up to 5"; support fences for up to 10" moulding width.

Make an offer - Machine is in an Ex-Factory Liquidation. 4-Station Profile Shaper Specifications: 6" Chain drive with non-marking rubber top pads traveling on a hardened and ground precision dia. 5/8" round rods, Top pressure beam driven, Heavy duty fabricated transporter frame, Forward and reverse mode and block mode for creating sanding tools Precision X & Y axis mounting stands, 60° rotating tilt on mounting stands with positive lock, Independent activation control at each station, Adjustable infeed fence system, All dust hoods and guards, 2 HP AC variable speed gear drive 5 to 60' per min. Workstation 1: 3.5 HP TEFC Saw Arbor Motor, 1" Dia. Spindle, Dust Hoods with 4" outlet, Mounted on precision X & Y slides Workstation 2 & 3 - Belt Sanding Unit: 2 HP AC motor drive, Air belt tension system, Independent belt tracking system, Air activated sanding pad with touch control, 2" sanding belt width, Guards and Dust hoods with 4" outlet Workstation 4 - Wheel Sanding Unit: 3" HP variable speed (0-3,400 RPM) AC TEFC drive motor, 1" or 1.25" arbor 3.5" long, Dust Hood with 4" dia. outlet, Mounted on precision X & Y slides SPECIAL NOTE: Needs New PLC or wire for traditional controls NOTE: Above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

Progress 22’ Log Deck (4) Strand w/9 Arm Stop & Loader

Progress 24" wide pan x 35' long, 9" sides, good condition

Progress 24" x 32' x 10.25" Deep Vibratory Conveyor w/Transition To Chipper, Dust Screen & Drive

Progress Industries 24" x 48" DFBD Swing Hammer with 200HP Motor.

Progress waste grinder, swinging hammer style, 125 hp electric drive, 1185 rpm's, unit needs to have hammers installed, good overall condition

Progress 60" 6 Knife Drop Feed Chipper S/N 00-0026 Drop Chute with Top Discharge

PROGRESS 60", 6 knife chipper, Serial # 1152, horizontal feed, bottom discharge, fair to good condition (top hood has welded places). As-is $9,400 OBO. 

Progress 60" 6K Chipper S/N 0011

Progress 84" 8K Chipper S/N 0107

Progressive Systems Inc End Matcher

Progressive Systems Gang Rip Saw 50HP Electric Motor with Froedge Auto Aligning Infeed the widest it will rip is 36"

PROGRESSIVE - Model SB/D 31, ...Dip Chain Gang Rip Saw.Specifications: -- 31" Cap. arbor with: Pneumatic arbor lock, 14" max. dia. tooling, -- 5" max. motorized thickness adjustment; 22" min. length for glue joint accuracy, 6" throat depth to fence side of blade. -- (1) 31-1/2" Saw sleeve with: Double-keys arranged for 3-1/8" bore saw blades. -- Equipped with: 75 HP - 3,600 RPM TEFC -- Direct drive motor, arbor with disc brake & load meter; 2-3/16" dia. turned, ground & polished saw arbor with outboard bearing; motorized vertical adjustment of arbor. -- Feed & chain: 34" Wide feed bed, -- 5 HP variable feed drive, feed speed from 30 - 150 FPM; adjustable jam protection. -- Dip bed carried on 2-1/2" pitch hardened double V-chain, extruded structural aluminum feed bed slats with replaceable Equipped with & Features -- "Safety Orange" polyurethane inserts; oil mist lubrication for extended chain life. -- (2) Infeed & (2) outfeed 4" dia. air loaded overhead pressure rolls; full width air loaded laminated bed holddown plate at saw arbor with +/- 1/4" thickness variation with pressure adjustment -- Pressure rolls & bed plate unit with manual height adjustment. -- Anti-kickback Finger System with: (1) Lower & (2) upper on infeed, (1) upper between feed rolls, and (1) upper assembly on outfeed. -- 5" Dia. dust outlet on upper infeed & 8" dia. dust outlet in upper outfeed; control panel mounted on infeed; saw sleeve and spacers. Note: Includes One Sleeve with a Collection of Spacers -- Owner's Manual Included -- Machine can be purchased As Is with a condition report (available on request), or you have it gone through ( As Is will be at a reduced price )

2021 PROMAC HSM60 Depth Control Hi-Flow Mulcher, 95-120 HP Skid Loader, 35-45GPM, 107CC Variable Speed Motor. Please Call For More Info.

2021 PROMAC RHP 36 Rotary High Production Excavator Brush Cutter, NEW, Min of 15 ton Max 20 Ton, 80CC Drive Motor, Please Call for More Info

2023 PROMAC LSM30 Excavator Mulcher, 4-10 Ton Excavator, 30 Cutting Width, 630#, Brush Rake, 13-23 GPM, Please Call For More Info!