Equipment For Sale

BALEMASTER - 48 X 72, ...Horizontal Closed Door Baler -- Designed for baling of whole or flattened corrugated boxes. -- Large feed opening to accommodate feed of larger material. -- Large 48" x 36" x 72" bale; weighs up to 1,700 pounds. -- Perfect for a Qarehouse application. -- 25 HP Moroe

BALEMASTER - EO-1700: Auto-Tie Horizontal BalerSpecifications: -- Model: 5,250 (EO-1700). -- YMG: 2003. -- Motors: (2) 25 HP. -- Cylinder: 10" . -- Feed opening: 75" x 45". -- Bale: 48" W x 40" H x variable L. -- Touchscreen. -- Air/Oil Cooler. -- Bale table. --Boxes of bale wire included

BALEMASTER - EO-650: Horizontal Auto-Tie Baler Specifications: • 25 HP Motor.• 8"; Main Cylinder.• Hopper Opening: 46";x 50";.• Bale Size: 48"; x 30"; x (variable).• Main Ram Face Pressure: 75 PSI.• System Pressure: 2,000 PSI.• Total Compression Force: 100,500 Lbs.

BALEMASTER - 4550G-10: Auto-Tie Horizontal BalerSpecifications: --27"; x 40"; Opening. -- 50 HP. -- 10"; Cylinder. -- 30"; x 40"; x Variable Bale.

BALESTRINI MINI C 2500 DOUBLE SIDED TEMPLATE PROFILE SHAPERSpecifications: -- (2) Offset shaping heads with 10 HP (7.5 kW), 230/460 volt three phase drives. (1 each side) -- Maximum reciprocating length 98" (2500 mm). -- Maximum height 7" (180 mm). -- Maximum width between spindles 8", and shaping heads are staggered for full end rounding. -- 1¼"; Diameter work arbors with 7″ under the nut capacity, and Spindle speed of 8400 RPM -- Hydraulic stroke of 9-3/4″ wide x 110″ long tee slotted work table, with feed speeds of 3 - 49 feet per minute (1-15 m/Min.) powered by 3 HP, 230/460 volt three phase hydraulic pump -- Overhead beam clamp bar with (4) adjustable clamps. -- Push button operator control station.

2-Machine System consisting of BALESTRINI "PICO" Round End Tenoner & BALESTRINI "MICRO.N" Slot MortiserSpecifications -- "PICO" Round End Tenoner: Left & right "twin" tilting tables (one table is always in the cutting position); 14" x 9" tables tilt 0ø - 20ø, both table fences with pin stops for indexing stile and rail doors. -- Fences swivel up to 45ø, each table with vertical pneumatic holddown; 4 HP cutter block motor, 1 HP cutter block rotation motor, 9,000 RPM spindle speed. -- Capacity: 3-15/16" (100 mm) Max. tenon length, 1-3/16" (30 mm) max. thickness, and 1-31/32" (50 mm) max. depth. - Hourly production rate of (600 - 700) tenons."MICRON" Slot Mortiser: Dual spindle system, (1) each side with tables and overhead holddown, 3 HP - 9,000 RPM spindles, (60 - 350) oscillations/Min, 18 mm collet dia. -- Capacity: 4-23/32" (120 mm) Max. length of slot, 3-1/8" (80 mm) max. slot depth, 1-3/16" (30 mm) max. slot thickness. - Hourly production rate of (500 - 800) slots.Note --The PICO has a timing issue and may just need to be adjusted.

BALESTRINI 2 CAP Mortiser --Automatically mortises or bores round holes in chairs or case good --Specifications -- Twin tables with pneumatic holddown clamps, (1) on each side eliminating dead cycle time, 19" long tables tilt left or right 0ø to 20ø. --Equipped with & Features -- 3 HP - 9,000 RPM Spindle motor and 1 HP oscillation motor. -- Spindles are mounted on prismatic guides with adjustable bronze gibs and move by rack & pinion, -- (120) to (240) oscillations/Min; 4-23/32" max. oscillation length, -- 3-1/8" max. depth, 7/8" max. bit dia., 13 mm spindle collet dia.

BALESTRINI C 70 Double Sided Feed Through Copy Shaper;Profiles various chair, table and casegood components from a prepared template. The feed through system allows curved or extremely long parts to be shaped with little or no limitation. Equipped with: -- (2) Vertical shaper spindles, 7.5 HP motor each; 30 mm dia. spindles, 8,000 RPM cutter rotation. -- Reversing rotation by switch for climb cut or conventional cut. Specifications: -- Max. working width 358 mm (14-1/8"), max. working height 118 mm (4-5/8"), min. working length 240 mm (9-1/2"); max. size of cutter blocks 90 mm x 120 mm and up to 3/8" vertical adjustment of heads. -- Part on template block is being shaped by running between spring loaded spindles with copy bearings following the template pattern. -- 1 HP variable feed motor 3 - 26 FPM, hand crank adjustable horizontal rubber infeed & outfeed holddown rollers. -- Machine has (2) 120 mm diameter dust outlets. -- Machine dimensions: 53" x 49" x 43" Machine weight: 2,310 lbs.

2008 Bandit 1590XP Drum Chipper with140hp John Deere Engine, winch, auto feed, lift cylinder, Ex municipal machine in very good shape. Length: 12' 6" Width: 8' 6" Height: 9' 3" Weight: 12,500 pounds (approximate) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Bandit 3680 Beast Recycler with a Cat C15.565 hp Engine with 4,800 hours. Radio Remote and Magnetic pully. Weight. 62500 lbs. Width. 130 in. Height. 162 in. Length. 528 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Bandit 2550XP Stump Grinder -Kubota gas engine -Beltless hydrostatic direct-drive -Standard 4-wheel drive -35” wide grading blade -Rubber tires -Approx 150 hours REDUCED PRICE

Micro Chipper C-27 Tier II 875 HP 5173 Hours

2023 Bandit 2590T Beast -160 hours -Gold warranty -Fully loaded -On tracks

2004 Bandit 1390 15 inch drum chipper with 142 hp Cat tier 3 engine winch lift cylinder (crusher) on top feed wheel. Auto feed, hydraulic swivel and height adjustable discharge chute. New tires, new knives and anvil 4,500 hours LENGTH (CLOSED): 188” LENGTH (OPEN): 218” WIDTH: 81” HEIGHT: 110” WEIGHT: 7,500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Bandit Model 3090 Track Whole Tree Chipper, Only 500 Original Hours, Volvo Turbo 800 HP Diesel Engine, 24" Whole Tree Chipper 26" x 36", 6 Knife Chipper drum, Opening, Air Compressor, Undercarriage is 99%, Radio Remote Control System, 7-1/2' Infeed Conveyor, Hydraulic Discharge Chute for Discharge Ready to Chip. Length: 33’ 6” Width: 11’2” Height: 12’ 3” Weight: 59,000-62,000 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 horizontal grinder/chipper mobile track 2800 hours New twin Disc clutch New conveyor New 3 stage pump New cutter mill drive belts Currently mill is converted to chip knives Have all cutterbodies, teeth, screens and gate to convert to grinding.

2022 Bandit SG40 Stump Grinder, Kohler 38 hp EFI Gas with 238hours, New Belts, 18” diameter x 1/2 thick New Revolution cutterwheel with 47” swing, Adjustable rubber tracks. L 100.5” W 29” H 48” Lbs 1,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Bandit 1850 Whole Tree Chipper Deere 325HP Turbo Engine, Engine had a complete engine rebuild 500 Hours Ago, 360 Degree Grapple Rotation, Heat and Ac in Cab Ac is not hooked up, ONLY 6,100 Original Hours, Joystick Controls. Length 282” Width 102” Height 156” Weight 20,000 lbs.

2017 Bandit Beast 4680T -1800 hours -1050 hp Cat c27 -Spare New Screens -48 tooth mill -New overband magnet -Newer discharge belt

2014 Bandit 2290 Track Whole Tree Chipper, Equipped with a Deere 600 HP, No DEF, Pro Heat, Infeed Chain, Wireless Remote, 314 Undercarriage is 85-90%, Reversing Fan, PT Tech Clutch, 2400 Original Hours, Ready for the Woods. Length: 21’ Width: 10’ 2” Height: 11’ 6” Weight: 40,000 - 46,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.