Equipment For Sale
10601 Results Found
$ 61,900
2005 Tigercat 244 Log Loader, 2006 Big John Trailer with CTR Delimber and Topping Saw, CTR Ground Saw, Cummins 5.9 Diesel Engine Enclosed Cab Heat and AC, Ready for the Woods. Length: 15 ft 7 in Width: 10 ft 0 in Height: 11 ft 0 in Weight: 36,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 84,900
2013 Tigercat 620D Cummins Dual arch Winch AC/Heat Turn around seat with joysticks New pins and bushings New glass New radiator 30.5 tires (one new and the rest at 80%) 13500 hours On the job working daily
$ 63,900
2015 Tigercat 620E Grapple Skidder, Winch, Engine has 12,700 Hours, Enclosed Cab with Heat and Air Conditioning, New Upgraded Transmission, New Rear End, Center Section is around 60%, Needs Joystick Replaced Ready for the Woods. Weight 37,750 lbs Length 27ft Width 12 ft Height 10ft 4in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
2019 Tigercat H822D, Equipped with a Tigercat 575 Processor Head, New Engine with under 1,000 Hours, Frame Hours 9700, Enclosed Cab Heat, Air, Radio, Undercarriage 85-90%, 28" Single Grouser, Fire Suppression, Ready for the Woods. Length: 35 ft 0 in Width: 11 ft 1 in Height: 10 ft 11 in Weight: 62,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
2009 Tigercat 845C in perfect condition, 13,000 New Undercarrige, New hydraulic pump, Very good condition with no leaks. Work ready, Very tight and clean. Weight 57,100 lbs Length 16 ft 2 in Width 10 ft 9 in Height 11 ft 0 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
5702 full rotation saw, good disc, buttplate, skis, runs smooth. 24” tracks, nine roller u/c. Recent track chain, bottom rollers, sprockets. Needs pads (starting to break). New engine 2216 hours ago, machine hours 10,778. U/C work done at 9354 hours, Sept 2020 Lower frame, track frame factory reinforcement kit update completed. Lower fueling option
2020 Tigercat M726G -3580 hours -2800 Cutting hours -Tigercat mulching head -Tight and dry machine -Turn Key machine
$ 465,000
2010 Bandit 4680T Track Horizontal Grinder, Equipped with a Caterpillar C-27 1050 HP Engine,3700 Hours Currently, Undercarriage is 85%, Machine has 2" and 3" Screens, 2nd Owner, Wireless Control, New HG600 Clutch, New Head and Tail Shaft, New Conveyor Belt, Compressor on machine, Ready for Work. Weight 95,200 lbs Width 140 in Height 152 in Length 492 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
1998 Tigercat 845 Feller Buncher, Tigercat 5401 Buncher Head, Engine was replaced Has 3000 Hours, 20,000 Frame Hours, 8.3 Liter, 300 HP, Tigercat Head. Hydraulic Pump has 3000 Hours, Undercarriage is 70% Enclosed Cab with Heat and Air Conditioning, Weight 57,100 lbs Length 16 ft 2 in Width 10 ft 9 in Height 11 ft 0 in
2007 Tigercat 845C 22" hotsaw Good UC Approx 10k hours Runs and operates good On the job daily
$ 42,500
2005 Tigercat 240B Log Loader -11412 frame hours -Heat/cold ac -Delimber -Lights -Decent tires -Brakes -New knives -New topping saw bar/chain -Good Tigercat grapple -On the job working
$ 65,000
This loader has been through our shop. Overall this is a tight and try loader. It has minimal pin wear. We installed new injectors. Engine runs good. Hydraulics are strong. Hydraulic legs. Loader is ready to go to work. We have both a RH and LH late model CSI DL-4400 bucksaw available as a package deal. Equipment financing and delivery available.
$ 149,000
Very nice 2019 Tigercat dual arch skidder. Ran through our shop and everything checks out mechanically. All new pins and bushings. New glass. Joystick control. HD axles with 95% Firestones. Deep rubber 30.5s. Equipment financing and delivery available.
Call for Price
Call for Price
Call for Price
Call for Price
2016 Tigercat 860C Feller Buncher, 22" Saw Head is a Tigercat 5702 with 40-degree lateral Tilt. Only 7500 Hours, Pre DEF Engine, 60 % Undercarriage, Enclosed Cab with Heat and Air Conditioning, Fire Suppression, Non-Leveling Cab Overall Length 17.66ft in Overall Width 10.75ft in Height To Top Of Cab 10.83ft in Ground Clearance 2.33in Tail Swing Radius 4.75ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.