Logging Equipment For Sale

2012 Ponsse Ergo Processor, H7 Processor, Machine has 17,600 Hours, Main Wiring Harness Replaced, Engine Computer,is New, New Injectors, New Rotator, New Lower Knives, New Water Pump, New Cam Sensor, Enclosed Cab with Heat and AC, New Lower Section on valve bank replaced, Ready for the Woods. Operating Weight 35,274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Ponsse Ergo Processor, Includes a Ponsse H-7 Processing Head, Hours are 17,530, Center Section is Tight, Enclosed Cab with Heat and Air Conditioning, No Tracks, Rotator Rebuild, Ready for the Woods. Operating Weight 35,274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Ponsse Elk Forwarder, Equipped with a Newer Set of Tracks, 600 Tires, Low Hour Machine, Has New Module, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Weight 30,864.8 lb Length: 31.91 ft Width over tires: 9.75 ft Height to top of crane: 12.47 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Ponsse Ergo, 13,860 hrs., 2 speed transmission, Wabasto pre-heater, new batteries, Trelleborg 710-45-26.5 tires at 75%, 2 sets of tracks. all panels/doors/Glass are nice and straight, $189,500

2017 Ponsse scorpion king harvester with H7 head, 7800 hours, Very good condition, Woods ready. Minimum weight 47,840 lb Typical weight 50,045 lb Length 316 in Width 104 -121 in Transportation height 146.5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Ponsse Ergo 8 wheel Processor -12,900 hours -C44+ crane -H8 head -New head pump -New drive coupler -Pump gear box rebuilt -New windows -New exhaust -New feed wheel arms -New feed wheels -New knives -Saw motor and complete saw assembly and much more -All work done by Ponsse Ready to work

2008 Ponsse Buffalo Fowarder -17,400 hours -New boom chains -Re- sealed crane pump -Tracks are new -Recently repainted machine -Owner operated and on a job working

2014 Ponsee Ergo Harvester, 7,300 Original Hours, Refurbished H7 Processor Head, Two Sets of Tracks and Chains, Centers Tight, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Operating Weight 35,274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc

2014 Ponsse Wissent Double Bunk Forwarder, Mercedes Engine OM9O904LA with 9,500 Hours, K-70 Crane, Double Squirt Boom (30') Reach, Super Grip Grapple, Ponsse Opti Control, Easy Manouvering in the woods with X8710 x 26 Tires, Wabasto Pre-Heater, Enclosed Cab with Heat and AC, Air Ride Seat, 3 Speed Hydrostatic Transmission, High/ Low Range, All Parts and Service Manuals Ready for the Woods Length 29.7ft in Width Over Tires 9.32ft in Height To Top Of Crane 12.14ft in Ground Clearance 2.12ft in Length Of Bunk Area 14.77ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Ponsee Elephant King Forwarder, OM906LA 2345 275hp diesel engine with 16,000 hours, New turbo, Central Lube, Rear boogies serviced, Woods Ready. More pictures available. L 37’ W 10’3” H 12’8” 47,000 Lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Ponsse Scorpion King Harvester - H7 HEAD Harvester Head with 11,000 hours. Typical weight Scorpion King 49,604 lbs Length 316 in Width 104–112 in Ground clearance 25.8 in Transportation height 147 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Ponsse Wisent Forwarder 9500 hours 2 owner Nice machine Currently on the job in use daily 2011 Ponsse Ergo processor with H7 head also available

2011 Ponsse Ergo Processor/Harvester H7 head 2 owner 13k hours Complete refurb by Ponsse Currently on the job in use daily 2014 Ponsse Wisent forwarder also available

2012 Ponsse Ergo (8 Wheel) Processor Equipped with a Mercedes 270 HP Engine with 12,500 Hours, C-4 Crane, H7 Processor Head, Enclosed cab with Heat and AC, Wabasto Pre Heater, 710 Tires around,90% on Tracks, 1 set aggressive, other standard tracks, Good Diffs, Boggies and Drivebox, Fire Suppression, 30 Day Parts Warranty. Ready for the Woods..... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Ponsse Ergo 8WD Harvester, H7 Head, Machine in Excellent Shape Inside and Out.

2013 Ponnse Ergo Processor, 13,000 Hours on the Engine Mercedes 270 HP Engine, C-4 Crane and H-7 Processor Head, 1000 Hours on Remaned Engine, Outer Boom Chains Replaced New Crane Bearing, Enclosed Cab with Heat and AC, Tracks available Ready for the Woods. Operating Weight 35274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2570 Prentice Feller Buncher PARTS MACHINE

2008 Prentice 2344 forwarder. Same machine as a Caterpillar 534. Caterpillar C4.4 engine. Funk axles & powershift transmission w/torque converter. Danfoss valve bank. Tires are 23.1X26 @ 95%. Joystick controls. Extendo boom loader. Heat & A/C. Pro-heat system. At 1750 original hours , this machine is in excellent condition!

Prentice 2384B parts loader lots of good parts available

JUST IN CALL FOR DETAILS