Logging Equipment For Sale

2015 John Deere 1010E, 17,634 hrs., Espar pre heater, Deere 4045 POWERTECH w/2 speed hydrostat trans., boom runs smooth, front tires 710 /55 R34 40%, Rears 710 /40-24.5 40%, PC Monitor, $129,500

2005 John Deere 1010D, 11,826 hrs., single bunk, Deere 4045 4 cyl. turbo diesel, Hydrostatic 2 speed travel, 572 Crane, 600 rubber all around, Heat/AC, $89,500

1989 Deere 648D Grapple Skidder. Winch, New Winch Drive Line, New Reat drive shaft, Rebuilt Parking Brake, New Clutch, Clutch Plate, Transmission went through, Centers are fair, Tires are 28L x 26, Hours are Reading 2,100 on Meter. Length 22 ft 7 in Width 11 ft 0 in Height 9 ft 8 in Weight 24,440 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1982 Deere 540A Forwarder, Equipped with a 19' Bed, Single Bunk (4) Tires, Engine is a Deere 6 Cylinder, Hour Meter Showing 5700 Hours, Centers and Steering Cylinders are Tight, Tires in Excellent Shape, Went through Parking Brake, Transmission Brake, All tight, A lot of New Hoses, New Paint, Ready for the woods. Operating weight 18,675 lbs Wheelbase 106 inches Length 242.5 inches Width 103.9 inches Height (ROPS) 115 inches Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Deere 335D Log Loader, Equipped with a CSI 203 Delimber, Engine has 14,000.00 Hours, Enclosed Cab with Heat and Air Conditioning. Weight 27,580 lbs Length 30 ft 0 in Width 8 ft 5 in Height 13 ft 5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1983 Deere 540B Grapple Skidder, Factory Deere Grapple, Winch, Needs Drive Shaft, New Shaft Cables, Doors Available, Tires are 23.1 x 26 Good Shape, Good Centers, Newer Pump, Centers Good, Ready for the Woods. Operating weight 18,675 lbs Length 242.5 inches Width 103.9 inches Height (ROPS) 115 inches Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 John Deere 648H -13000 hours -Direct drive -Sweda Axles -30.5 Tires -Tight and dry -Winch -New injectors -New turbo -Needs one blade cylinder repacked -Everything works

2017 john Deere 437E knuckle boom log loader with 264 ultra delimber by CSI, heat and air cab, joysticks controls, saw hookups, pitts trailer with hydraulic dollies on the front super tight turn bearings they were replaced at 7,xxx hrs it has 9,252 hrs on it now $65,000...call eddie at 931-seven 04-7852

1993 John Deere 648E -14,489hrs -Reman motor less than 500hrs -Tires @75% -Tight and dry -Runs drives and operates perfectly.

2013 John Deere 848H Dual Arch Grapple Skidder with winch, 7,000+ hrs. Weight 39 300 lbs Length 26 ft 6 in Width 11 ft 5 in Height 10 ft 5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Machine has been through our shop. New injectors. Some play in the turntable bearing like most Deeres. Loader is dry and ready to work. Equipment financing and delivery available.

Ran through our shop. Tight and dry. New second stage hydraulic pump. Updated dozer blade frame mounts. We replaced the turbo. New glass, pins and bushings. Cylinders packed. 35.5s with SWEDA HD axles. Ready to go to work.

Cab w/ AC, Delimber, Log Loader, Slasher/Swing Boom, w/ Bucket, w/ Heel

30.5 Tires, Cab w/ AC, Direct Drive Trans, Dual Funct Grapple, Heavy Duty Axles, Limb Risers, ROPS, Stacking Blade, Winch

2014 John Deere 437D Log Loader, Rebuilt Engine, 52” Rotobec Grapple , Nww Turntable Bearing , 2018 CSI Saw

2018 John Deere 853M Hot Saw, 5400 hours, Undercarriage @ 75%, Nice Machine, $239,900

2005 Deere 648G-3 Grapple Skidder, Winch, Machine Has 13,000 Hours,New Rebuilt Engine with only 400 Hours, New Injection Pump, ECU, Tires are 30.5 x 32 Rears are 40%, Fronts are 25%. Enclosed Cab with Heat, Ready for the Woods. Weight 32,000 lbs Length23 ft 7 in Width10 ft 6 in Height9 ft 9 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 John Deere 748L2 -6767 hours -New grapple tip -New hydro stats -New turbo charger -Tight and dry -4 all brand new tires

2018 John Deere 848L -9600 hours -Winch -Serviced regularly -Tight and dry -Ready to work MORE PICTURES COMING SOON !!!

2015 John Deere 853MH -11,323 hours -Waratah HTH623C head machine -Tight and dry -UC is good Ready to work