Logging Equipment For Sale
656 Results Found
$ 275,000
$ 152,000
MLS Number 12742719 2015 Link-Belt 370LX Log Loader 12,692 hours Cab riser Isuzu 7.8L diesel CWS Butt-N-Top grapple No oil leaks Grousers 80% UC 50%
Call for Price
$ 79,500
Cummings ISX500 engine, 18 Speed Eaton Fuller, 46K rears and FMT20 Hendrickson lift axle rated 20-25,000 lbs. Rotobec Elite XT-MT26 loader with Hultdins Supergrip 360S-LP grapple. Steer tires 425/65R22.5, lift axle tires 385/65R22.5 and rear tandem 11R-22.5. RECON ENGINE (2016)
$ 15,500
Call for Price
2012 Ponsse Ergo (8 Wheel) Processor Equipped with a Mercedes 270 HP Engine with 12,500 Hours, C-4 Crane, H7 Processor Head, Enclosed cab with Heat and AC, Wabasto Pre Heater, 710 Tires around,90% on Tracks, 1 set aggressive, other standard tracks, Good Diffs, Boggies and Drivebox, Fire Suppression, 30 Day Parts Warranty. Ready for the Woods..... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
2011 Ponsse Ergo Processor, Includes a H-7 Head purchased from Ponsee, 13,500 Hours on Machine, Machine was refurbished with 3 pages of information, Good Center Section and Tires, Enclosed Cab with Heat and AC, Well Maintained, Tracks Front and Rear. Operating Weight 35,274 lb Shipping Length - Non Tilt 25.2 ft in Overall Width 9.32 ft in Height To Top Of Cab 12.37 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
2018 Ponsse Scorpion King Harvester - H7 HEAD Harvester Head with 11,000 hours. Typical weight Scorpion King 49,604 lbs Length 316 in Width 104–112 in Ground clearance 25.8 in Transportation height 147 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
2011 Ponsse Ergo Processor/Harvester H7 head 2 owner 13k hours Complete refurb by Ponsse Currently on the job in use daily 2014 Ponsse Wisent forwarder also available
2016 Ponsse Ergo 8 wheel Processor -12,900 hours -C44+ crane -H8 head -New head pump -New drive coupler -Pump gear box rebuilt -New windows -New exhaust -New feed wheel arms -New feed wheels -New knives -Saw motor and complete saw assembly and much more -All work done by Ponsse Ready to work
Call for Price
2017 Ponsse scorpion king harvester with H7 head, 7800 hours, Very good condition, Woods ready. Minimum weight 47,840 lb Typical weight 50,045 lb Length 316 in Width 104 -121 in Transportation height 146.5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
2014 Ponsee Ergo Harvester, 7,300 Original Hours, Refurbished H7 Processor Head, Two Sets of Tracks and Chains, Centers Tight, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Operating Weight 35,274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc
2016 Ponsse Scorpion King Processor, Equipped with H-7 Crane, Engine has 11,500 Hours, One Set of Eco-Tracks, Extra Bar and Chains, Has CT+ 1 Auto Tensioner, Enclosed Cab with Heat and Air Conditioner, Air Condition Just recently done by Ponsse, More Pictures of Interior Coming Soon. Comfort Grips. Weight 49,604 lbs Length 316 in Width 104–112 in Height 147 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
2012 Ponsse Ergo Processor, H7 Processor, Machine has 17,600 Hours, Main Wiring Harness Replaced, Engine Computer,is New, New Injectors, New Rotator, New Lower Knives, New Water Pump, New Cam Sensor, Enclosed Cab with Heat and AC, New Lower Section on valve bank replaced, Ready for the Woods. Operating Weight 35,274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
2011 Ponsse Ergo Processor, Includes a Ponsse H-7 Processing Head, Hours are 17,530, Center Section is Tight, Enclosed Cab with Heat and Air Conditioning, No Tracks, Rotator Rebuild, Ready for the Woods. Operating Weight 35,274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
2014 Ponsse Wissent Double Bunk Forwarder, Mercedes Engine OM9O904LA with 9,500 Hours, K-70 Crane, Double Squirt Boom (30') Reach, Super Grip Grapple, Ponsse Opti Control, Easy Manouvering in the woods with X8710 x 26 Tires, Wabasto Pre-Heater, Enclosed Cab with Heat and AC, Air Ride Seat, 3 Speed Hydrostatic Transmission, High/ Low Range, All Parts and Service Manuals Ready for the Woods Length 29.7ft in Width Over Tires 9.32ft in Height To Top Of Crane 12.14ft in Ground Clearance 2.12ft in Length Of Bunk Area 14.77ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 205,900
2014 Ponsse Wisent Forwarder 9500 hours 2 owner Nice machine Currently on the job in use daily 2011 Ponsse Ergo processor with H7 head also available
$ 135,000
2008 Ponsse Buffalo Fowarder -17,400 hours -New boom chains -Re- sealed crane pump -Tracks are new -Recently repainted machine -Owner operated and on a job working
$ 112,500
2009 Ponsse Elk Forwarder, Equipped with a Newer Set of Tracks, 600 Tires, Low Hour Machine, Has New Module, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Weight 30,864.8 lb Length: 31.91 ft Width over tires: 9.75 ft Height to top of crane: 12.47 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.