Logging Equipment For Sale

2016 Tigercat 860C Feller Buncher, 22" Saw Head is a Tigercat 5702 with 40-degree lateral Tilt. Only 7500 Hours, Pre DEF Engine, 60 % Undercarriage, Enclosed Cab with Heat and Air Conditioning, Fire Suppression, Non-Leveling Cab Overall Length 17.66ft in Overall Width 10.75ft in Height To Top Of Cab 10.83ft in Ground Clearance 2.33in Tail Swing Radius 4.75ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Recent u/c work, 5702- 340 Degree Wrist, 36” Triple Grousers

36" Triple grouser pads, low hours for age, well cared for. engine rebuilt at 10k hours

2012 Tigercat L870C Feller Buncher -3500 hours on the following: -New engine -Pumps -Finals -Uc is around 70% -New A/C compressor and belts Ready to work

2016 Tigercat 870D Feller BuncherLeveling Cab, NO DEF, 2500 Hours on NEW UNDERCARRIAGE, 1000 Hours on Rebuilt Saw Head and Leveling Cylinder, Encosed Cab with Heat and AC, Tigercat Saw Head. Operating Weight W/O Attachment 66,870 lb Overall Length 18.18ft in Overall Width 10.83ft in Height To Top Of Cab 10.83ft in Ground Clearance 2.33 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 880 Tigercat log loader 16- square grapple. Hoe chuck grapple also available. New grapple has less than 2,000 hours and cost almost a hundred thousand dollars and works awesome! 8,200 hrs.

New Cab for Timbco 820, $2500

28” single grouser pads for 445 Timbco or 735 Timber Pro. $40 each

Timbco 33" Bar Saw, Like New with a Heavy Duty Waratah 360 Rotate

Timbco 415 lower car body, very low hours, excellent tracks, GFT 50 finals, drive motors.

2006 Timbco 415 Processor, Logmax 7000 Processor Head, Machine Isuzu Engine and has 6000 Hours3.5 Gallons/per hour, Undercarriage is 50%, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Operating Weight 96,672.8 lbs Height - Top of Cab 10.7 ft Shipping Length - non tilt 13.5 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Special pricing on Lohmann GFT 50 Final Drives for 415 Timbco/Valmet

2001 Timbco 415D Processor with Rolly, hours unknown, Undercarriage @ 80%, $54,990 Trades Welcome

2005 Timbco 445EXL Feller Buncher, Equipped with a Quadco 22" 360 Wrist Saw, Enclosed Cab with Heat and Air Conditioning, Leveling Cab, Good Undercarriage 70%, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 TIMBCO 425XL METER READS 10,726 8.3 CUMMINS QUADCO FELLING HEAD PUMPS HAVE BEEN DONE 80% LIFE ON UNDERCARRIAGE RUNS AND OPERATES AS IT SHOULD FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2000 Timbco 445D Feller Buncher, Cummins 8.3 Diesel Engine, Hours Unknown, Has 43" Bar Saw with 3/4" Pitch, Heavy Duty Cat D-7 Undercarriage is 70-75%, Enclosed Cab with Heat and Air Conditioning, Repleaced 3 Pumps (New), New Control Valve, $15,000.00 in 6000psi New Hoses installed, Ready for the Woods. Weight 65,000 lbs Length 35 ft 6 in Width 11 ft 2 in Height 12 ft 0 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Location: ALLENWOOD, PA

2002 Timbco 425 Feller Buncher, Equipped with a Quadco 20" Fixed Head, Leveling Cab, Enclosed Cab with Heat and Air Conditioning, New Final Drives, UC is 80-85%, Cummins 8.3 Diesel with 11000 Hours, New Windshield, Ready for the Woods. Weight 55,235 lbs Height 12 ft 2 in Width 9 ft 8 in Length 21 ft 4 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Timbco 425, good undercarriage, both finals replaced, pumps and 8.3 Cummins rebuilt, will have some new lexan and a 360 rotation bar saw. $95,000

Timbco 425 bottom rollers, have single flange and double flange, (75) available