Logging Equipment For Sale
2079 Results Found
$ 59,900
2004 JOHN DEERE 640GIII CABLE SKIDDER 665 HOURS ON REBUILT GOOD TIRES GOOD CENTER RUNS GOOD GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM
Call for Price
Call for Price
2014 John Deere 703 JH Wood Processor with a 622 B Warata 3/4 chain main saw and a 404 top saw.Very clean, no leaks and no dents! Just over 10,000 hours working daily. Length: 27 ft 10 in Width: 9 ft 6 in Height: 11 ft 4 in Weight: 52,140 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Single arch 648 with winch. 28L-26 tires 60-70%. Chain front and back. Heat and a/c. Overall decent machine. New rod and packing on arch cylinder. Come check it out. 13k hours runs and shifts great
$ 85,000
2006 Deere 648G-3 Grapple Skidder, Winch, Enclosed Cab with Heat and Air, Rebuilt Engine with 200 Hours, 12,542 Frame Hours, Center Section is Good, Tires with Chains all Around Good Running Machine Ready for the Woods. Weight 32,000 lbs Length 23 ft 7 in Width 10 ft 6 in Height 9 ft 9 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 29,900
2005 JOHN DEERE 648GIII GRAPPLE SKIDDER METER READS 10,998 HOURS LESS WINCH TOURQE CONVERTER GRANITEHE.COM
$ 16,500
1997 John Deere 648G Dual Arch Grapple Skidder, Winch, worked Daily, Needs a little TLC, priced to sell!
$ 292,925
$ 89,500
2013 JD 648H dual arch grapple skidder, torque converter, all new pins and bushings, new windows, several cylinders repacked, several hoses replaced, we installed 10k hour engine from a JD 748, new wiring harness on engine,, new EGR valve, cold air, no codes, everything works correctly, no leaks. 18k on frame, new TCU serviced with Deere filters. Nice, clean and ready to work! Front tires 80%. Rear tires New, $89,500
$ 69,500
2013 JD 648H dual arch grapple skidder, direct drive, less than 1,000 hours on NEW CRATE ENGINE FROM JOHN DEERE. new engine in last year, Recent center and blade pins, no notable slack or leaks, Nice clean skidder, Cold A/C. 80% rubber, Ready to Work, $69,500
$ 82,900
2013 JOHN DEERE 748H SKIDDER 13,000 HOURS REMAN ENGINE REMAN TRANSMISSION WINCH NEW FRONT CHAINS VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM
2012 JOHN DEERE 753J FELLER BUNCHER 18,000 FRAME HOURS 5,000 HOURS ON REMAN ENGINE RECENT BIGFOOT UNDERCARRIAGE 21 INCH 360 DEGREE HOT SAW VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN NO PAYMENTS FOR 3 MONTHS WITH GOOD CREDIT GRANITEHE.COM
2018 Deere 859M Feller Buncher, Equipped with Quadco 24B 360 Degree Hot Saw, ONLY 7600 Hours, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 75%, Fire Suppression, NEW Crate Engine Tier 4 9 Liter, New DPF and Sensors, Engine is being replaced due to Low Compression in Cylinder, More Pictures Coming Soon, Ready for the Woods. Length 16.1 ft. Width 10.11 ft. Height 12.10 Weight 79,510 Lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 65,000
2013 John Deere 848H, 10,664 hrs., Nice clean has been thru shop, cylinder packed, swapped a tong, 2 bushings in and serviced it, new exhaust, new A/C compressor, nice solid Skidder with plenty of life, $65,000
$ 28,000
This 748H had been pulling wood every day before we bought it. The engine will need some work, it makes a ticking sound we’re not sure what it is, but besides that the machine is in good condition. All it would need is a newer set of tires and some engine work and this would be a very fine machine. It has 19,342 hours on it. For more information call Kameron 251/242/5493 Tim 251/366/3237 Gavin 601/394/7796 The skidder is being sold from Ala-Miss, Inc. located at 467 St Peter St, State Line, MS, 39362
$ 117,500
all new pins and bushing's in through out the machine, grapple, boom, arch, steering, full service, 35.5 tires, woods ready machine!
$ 40,000
5729 hr. sn#DW640GX582767, The engine is good the hud. Are tight the tires are 50% the winch is reconditioned. This machine has good life on it yet. Here you are LOGGERS call 330-521-4877