Logging Equipment For Sale

2011 Ponsse Ergo Processor, Includes a Ponsse H-7 Processing Head, Hours are 17,530, Center Section is Tight, Enclosed Cab with Heat and Air Conditioning, No Tracks, Rotator Rebuild, Ready for the Woods. Operating Weight 35,274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Ponsse Ergo Processor, H7 Processor, Machine has 17,600 Hours, Main Wiring Harness Replaced, Engine Computer,is New, New Injectors, New Rotator, New Lower Knives, New Water Pump, New Cam Sensor, Enclosed Cab with Heat and AC, New Lower Section on valve bank replaced, Ready for the Woods. Operating Weight 35,274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Ponsse Ergo, H73E Harvester with 22,000 hours, Dry machine, Computer does not work. Operating Weight 35,274 lbs Height - Top of Cab 12.4 ft Overall Width 9.4 ft Shipping Length - non tilt 25.2 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Ponsse Ergo Processor, Includes a H-7 Head purchased from Ponsee, 13,500 Hours on Machine, Machine was refurbished with 3 pages of information, Good Center Section and Tires, Enclosed Cab with Heat and AC, Well Maintained, Tracks Front and Rear. Operating Weight 35,274 lb Shipping Length - Non Tilt 25.2 ft in Overall Width 9.32 ft in Height To Top Of Cab 12.37 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Ponsse Buffalo Forwarder, Equipped with a K90 Loader, Mercedes Engine with Only 5600 Hours, Enclosed Cab Heat, Air, Radio, 1 Set of Tracks, All Maintenace records, Synthetic Oil 80 AW Hydraulic Oil, Four Bunks, Slide in and out. Ready for the Woods. More pictures coming soon. Weight 46,297 lbs Length 36.91ft in Width Over Tires 9.72ft in Height To Top Of Crane 12.31ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2003 Ponsse Caribou Forwarder, Equipped with 18,000 Original Hours, Mercedes Engine, 12 Ton Double Bunk Forwarder, Enclosed Cab with Heat and Air, One Set of Tracks. 1 New set of chains, Replaced Hydraulic Pump last year, Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Ponsse Scorpion King Processor, Equipped with H-7 Crane, Engine has 11,500 Hours, One Set of Eco-Tracks, Extra Bar and Chains, Has CT+ 1 Auto Tensioner, Enclosed Cab with Heat and Air Conditioner, Air Condition Just recently done by Ponsse, More Pictures of Interior Coming Soon. Comfort Grips. Weight 49,604 lbs Length 316 in Width 104–112 in Height 147 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2000 Ponsse Bison -Uknown hours -Perkins 6 cylinder diesel -New iQan control system for the crane and steering (100% joystick controls) -New Webasto preheater -Tracks and tire chains included -New Red Dot heat and AC system -Brand new LED lights -Good glass on sides and rear, front isn’t bad but not new -Has a few small leaks but otherwise ready to go to work

2002 Ponsse Caribou Double Bunk Forwarder, Mercedes Engine with around 18,000 Hours, Was run through Ponsse's Service Department several years ago, Enclosed Cab with Heat and AC, Center Section Good One Set of Tracks. Operating weight 12.8 t Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Ponsee Ergo Harvester, 7,300 Original Hours, Refurbished H7 Processor Head, Two Sets of Tracks and Chains, Centers Tight, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods. Operating Weight 35,274lb Shipping Length - Non Tilt 25.2ft in Overall Width 9.32ft in Height To Top Of Cab 12.37ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc

2022 Ponsse Buffalo King Forwarder, 3500 hrs., comes with tracks, local trade, very nice, clean machine, Trades Welcome, $429,000

2011 Ponsse Ergo, 17,600 hrs., H7 head, C4 External Boom Hose, Mercedes OM 926 paired with 2 speed hydrostatic trans., tires Roughly 50% , 710/55-34 fronts, 710/45-26.5 rears, automatic greaser, Webasto pre heater, older mini stick controls, 4G computer, $119,500

2002 Ponsse Caribou Mercedes engine very reliable forwarder just too small for our operation $75,000

2006 Ponsse Wisent Forwarder, refurbished in 2016, comes with tracks, $79,500

2021 Ponsse Scorpion King Processor, 4300 hours, cab bearing replaced 150 hours ago, comes with tracks, uptime kit, ready for the woods, trades welcome, Call for Price

New Ponsse Buffalo 8wd Log Forwarder, Best in the industry, give is a call today for pricing.

2000 Ponssee Cobra HS10 Harvester Cat 3116 125 crane Eberspacher Preheater 700/45-22.5 Tires New batteries Work ready

2005 Ponsse Buffalo Forwarder, New Engine Only 500 Hours Mercedes Diesel Engine, Wabasto Heater, Enclosed Cab with Heat and Air Conditioning, Centers are Tight on the machine, New Bucket Steering Cylinder. Operating Weight - 8wd 35,053.5lb Length 36.91ft in Width Over Tires 9.72ft in Height To Top Of Crane 12.31ft in Ground Clearance 2.29ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Ponsse Buffalo 21,578 Hours Good bogies, plaetaries and craine base oil. Crane works as t should. Tracks One set - Good Condition FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTH DEFERRED PAYMENTS WITH GOOD CREDIT IN-HOUSE FINANCING FOR LOW CREDIT TYPES GRANITEHE.COM

2016 Ponsse Ergo 8 wheel Processor -12,900 hours -C44+ crane -H8 head -New head pump -New drive coupler -Pump gear box rebuilt -New windows -New exhaust -New feed wheel arms -New feed wheels -New knives -Saw motor and complete saw assembly and much more -All work done by Ponsse Ready to work