Risley Equipment For Sale
2023 Results Found
$ 25,000
1984 John Deere 540B - Reman Engine replaced in 2014(low hours)by Deere -Rebuilt winch(items below) -New clutch -New brake bands and springs -Bottom center pin needs replacing(have new one ) -Small minor leaks - 2 new chokers -New fuel tank -New mainline -New turbo(200 hours) -Bear paw chains(almost new)
2018 JOHN DEERE 643L WHEELED FELLER BUNCHER 4916 HOURS TIGHT PINS GOOD TIRES READY TO WORK FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM
$ 23,900
$ 23,900
John Deere 648E Skidder Single arch boom No grapple Used as cable machine Runs and operates
$ 75,000
PRICE REDUCED 2004 Deere 548G-3 Grapple Skidder, Winch, Engine is reading 6,300 Hours, Engine was completely rebuilt around 2,000 Hours Ago, Tires are 28L x 26. Enclosed Cab with Heat, No AC, New Hydraulic Pump and Grapple Motor. More pictures on our website https://www.nefequipment.com/for-sale/2019-link-belt-4640-log-loader-11881540 Operating Weight 23,690 lb Overall Length 20.77in Overall Width 9.51ft in Height To Top Of Cab 9.88ft in Ground Clearance 1.68ft in Wheelbase 9.59ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 120,000
35.5 Tires, Aux Steering, Cab w/ AC, Dual Funct Grapple, Limb Risers, ROPS, Super Wide HD Axles, Trail Building Blade, Winch
$ 36,900
2014 John Deere 643K Feller Buncher 8600 hours Bunching head with 350 hours 30.5 tires at 40% AC Machine is tight Has a short somewhere Have to unhook battery to turn machine off and saw wont engage
$ 70,000
2016 John Deere 437E -13000 frame hours -New injectors -New muffler -Heat and A/C works great -New turntable bearing -Non Delimber Big John trailer -Prentice grapple on it needs attention -Lights good -Original tires
$ 44,900
2006 JOHN DEERE 748GIII SKIDDER 17,XXX HOURS RECENT TOP END DONE ON ENGINE GOOD TIRES WELL MAINTAINED FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM
Good running cable skidder. 6cyl John Deere engine. New blade pin and bushings. 23.1x26 tires. Two sets of chains. Open cab 23k hours.
$ 109,500
2007 John Deere 548GIII, 17,965 hrs., 6068T 6.8L engine, Powershift transmission, continuous rotation grapple, winch, chains, blade, Heat/AC, Joystick controls, pins and bushings were all replaced 1500 hours ago, very tight and dry, great condition, $109,500
Call for Price
1989 Deere 648D Grapple Skidder. Winch, New Winch Drive Line, New Reat drive shaft, Rebuilt Parking Brake, New Clutch, Clutch Plate, Transmission went through, Centers are fair, Tires are 28L x 26, Hours are Reading 2,100 on Meter. Length 22 ft 7 in Width 11 ft 0 in Height 9 ft 8 in Weight 24,440 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
1982 Deere 540A Forwarder, Equipped with a 19' Bed, Single Bunk (4) Tires, Engine is a Deere 6 Cylinder, Hour Meter Showing 5700 Hours, Centers and Steering Cylinders are Tight, Tires in Excellent Shape, Went through Parking Brake, Transmission Brake, All tight, A lot of New Hoses, New Paint, Ready for the woods. Operating weight 18,675 lbs Wheelbase 106 inches Length 242.5 inches Width 103.9 inches Height (ROPS) 115 inches Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 38,500
2011 Deere 335D Log Loader, Equipped with a CSI 203 Delimber, Engine has 14,000.00 Hours, Enclosed Cab with Heat and Air Conditioning. Weight 27,580 lbs Length 30 ft 0 in Width 8 ft 5 in Height 13 ft 5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 215,000
2022 Deere 848L-II Grapple Skidder, No Winch, Engine has 4,000 Hours, Fire Suppression, Espar Heat, Enclosed Cab with Heat and Air Conditioning, Ring Chains on the machine Ready for the Woods. Weight 49,348.3 lb Length 333.4in Width 140.7in Height 27.2 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
2013 John Deere 848H Dual Arch Grapple Skidder with winch, 7,000+ hrs. Weight 39 300 lbs Length 26 ft 6 in Width 11 ft 5 in Height 10 ft 5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 34,000
1983 Deere 540B Grapple Skidder, Factory Deere Grapple, Winch, Needs Drive Shaft, New Shaft Cables, Doors Available, Tires are 23.1 x 26 Good Shape, Good Centers, Newer Pump, Centers Good, Ready for the Woods. Operating weight 18,675 lbs Length 242.5 inches Width 103.9 inches Height (ROPS) 115 inches Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 53,000
2006 Deere 753G Feller Buncher Hours 14,000, 22" Head with 45% Lateral Tilt, Undercarriage around 35%, 24" Pads enclosed Cab with Heat and Air Conditioning, New Hydraulic Motor on Saw Head, Ready for the Woods Weight 52,995 lbs Length 25 ft 8 in Width 10 ft 4 in Height 11 ft 4 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
2015 John Deere 753J -11400 hours -Uc 90% -Receipts for: -New undercarriage -New swing pump -Swing motor and reliefs on the swing -Hydraulic pumps resealed -Over 60k worth of repairs -Tight and dry