Equipment For Sale
10572 Results Found
Farmall International gas engine. Starts good, runs good Been used on circular sawmill and worked on sawmill till 6/7/17. Includes: Tank heater, Muffler, Electric fuel pump, Comes with 8in 5-Groove C Belt. Does not include battery. Has a new water pump. Recently adjusted valves and rebuilt carburetor. Call 800-459-2148 for more info.
$ 2,000
$ 18,900
International S2500 Log Truck 13 speed Lift axle Dayton wheels 11-22.5 tires are good 21' bed Work ready VIN 1HTZPJUR5GHA17203
$ 52,900
1999 International Log Truck Cat 3406E 18 speed 500k miles Serco 7500 loader Still hauling logs
2000 international 2674 56,000 gvw Serco 80 crane, joystick with continuously rotating bypass grapple, and side dumping bed. The beauty of the side dump is that it allows the crane to be on the back so you can load the truck and your trailer. Standard length, not telescopic. 20 feet??not sel 130,000 miles DT530 navistar. Eaton 8LL manual transmission In good operating condition. It’s no beauty queen, but it can lift heavy things and do a lot of work. Fitted with electric brake controller All new brakes all around. Cans, liners and drums. Stops anything you can load or tow Locking differential, and power divider. You can lock the rear wheels together side-by-side, and you can lock all four wheels together. I’ve never gotten it stuck. Tires are probably getting old but have good tread. ? Oil and belts have been changed recently. Yes it’s “available” if you can see this ad. Just ask your actual questions. Please don’t waste my time and I won’t waste yours No trades, Call 800-459-2148 for more info.
$ 29,900
1998 International Paystar Tri Axle Log Truck, 8 Speed, M11 Engine, 20 Front axles, 46 Rears, Runs Good
$ 25,900
International TD8E Dozer Gearmatic winch Approx 3k hours Used as backup Was a previous oil field machine 6 way blade No leaks New starter and alternator New rear sprockets and idlers Runs and operates good
$ 11,500
1997 International 4600 LP -Single axle -Allison auto -Non Cdl -Hydraulic Brakes -T444e diesel Had truck running and driving will not restart Electrical or fuel issue
Call for Price
2006 International 7400 20x8x4 dump body truck with124,000 miles on Automatic, Diesel engine. Has Pintle Hitch, and PTO wet kit. Selling separately: 2016 DD 8’ x 20’ P.J. Trailer Nfg. Dump Trailer Electric/ydraulic disc brakes Scissor lift w/dual cylinders 12” I-beam frame 15k axles with 17.5” tires Hitch suspension Nu-Life Grapple Loader Hultdins Supergrip 360S grapple Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
2012 INTERNATIONAL WORK STAR DUMP TRUCK 50,000 MILES MAXFORCE ENGINE AUTOMATIC REAR PINTLE GOOD TIRES AND BRAKES PLOW FRAME NO PLOW VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM
$ 55,000
Int. Gravel Truck, Tandem, Tri Axle Dump Truck located in Tazewell, VA Contact Zach for more information. 931-224-0699
INTERNATIONAL - IB-4430-60-HD, ...Automatic Tie Horizontal BalerSpecifications: -- Bale size: 44" x 30" -- Hopper opening: 42" x 60" -- Cylinder bore: 8" -- Cylinder stroke: 82" -- Tension cylinder: 6" -- Cycle time: 15 Sec (no load) -- Ram force: 150,800 Lbs -- Main motor: 40 HPEquipped with: -- Oil cooler
INTERNATIONAL - 1295-44, ...Horizontal Closed Door BalerSpecifications: -- Cylinder: 7" -- Feed opening: 42" x 50" -- Main motor: 30 HP
INTERNATIONAL - 1295-44, ...Horizontal Closed Door BalerSpecifications: -- Cylinder: 7" -- Feed opening: 42" x 50" -- Main motor: 30 HP
Call for Price
INTERNATIONAL - AT-4843-850-60, ...Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8" -- Opening size: 60" x 46" -- Main motor: 50 HPEquipped with: -- Control panel -- Oil Cooler: Air-Over-Oil -- 10' Bale Run-Out Table -- High temp/low oil level shutdown
Call for Price
INTERNATIONAL TITAN-60-EC Full Eject Horizontal Baler with ConveyorSpecifications: -- Cylinder: 8" -- Main motor: 20 HP -- Feed opening: 58"; x 35"; -- Bale Size: 60"; x 48"; x 30"; -- Feed conveyor width: 48" -- Ram face pressure: 3,000 PSI -- Total force: 150,800 Lbs -- Cycle time: 32 Sec (14 Sec short stroke)Equipped with: -- Programmable controller with Ethernet -- Conveyor controls and conveyor hopper
Call for Price
INTERNATIONAL TITAN 6-EC Closed Door Horizontal Baler with ConveyorSpecifications: -- Cylinder: 8"; -- Motor: 20 HP -- Cycle time: 32 Sec Cycle Time -- System pressure: 3,000 PSI -- Total force: 150,800 Lbs -- Ram face pressure: 87 PSI -- Feed opening: 58"; x 35"; -- Bale size: 60"; x 48"; x 30"; Equipped with: -- Feed conveyor: 48" wide -- Programmable controller -- Ethernet connection
Call for Price
INTERNATIONAL MT-4843 Manual-Tie Horizontal Baler With Infeed ConveyorSpecifications: -- Cylinder: 8" -- Opening size: 60" x 46" -- Main motor: 40 HPEquipped with: -- Control panel -- Oil Cooler – Air-Over-Oil -- 10' Bale Run-Out Table -- High-Temp/Low Oil Level Shutdown -- 48" x 43" x 60" Bale Size