Equipment For Sale

2012 Morbark 30/36 Mountain Goat -4145 hours -Grapple -Wireless remote -Caterpillar C15 Engine with auto clutch Ready to work

2016 Morbark 1300B Track Tub Grinder, Caterpillar C27 Tier II 1050 HP diesel engine with 3454 hrs, 500 gal fuel tank, 205 gal hyd oil tank, 13' diameter tub opening at top wireless and tether remotes, self-contained air compressor w/ 11 HP Honda gas motor, Morbark Integrated Control System, reversing tub, auto sensors, PT Tech hydraulic wet clutch, adjustable external torque limiters on mill, Strickland double grouser tracks, hyd oil cooler, magnetized end pulley, automatic reversing fan. Gross Weight (approximate) 76,500 lb Length (transport) 40'9" Height (transport) 12' Width 11'11" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1991 Morbark 27 Whole Tree Disc Chipper, Cat 3412 750hp with 200 hours on the rebuild, It’s going to need the paddles soon, The knife, pockets and face plates all 80% hood liners and everything else in there is about 70%. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Morbark 1821 Brush Chipper, Gas, Hydraulic Winch, One Owner Trade In.

1998 Morbark 2400 Chipper, ONLY 1800 Original Hours, Perkins 185 HP Turbo Diesel Engine, Hydraulic Tongue Jack, Hydraulic Lift Assist Cylinder, Twin Disc SP 211 Clutch, Tires are at 50%, In Excellent Condition. Two Owner Machine, Ready for Work. Weight: 15,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

48" 6 knife chip-pac, includes 5' x5' shaker screen, electric drive, includes soft start, numerous spare knives and parts, good working condition

2016 Morbark 6600 Track Horzontal Grinder, Cat C32 1200 hp with 10,022 hours, Radio Remote, Magnetic Head Pulley. Work done. 5/23 fan pump replaced $8000 6/22 poclain feedwheel motor replaced. $20,000 4/24 Fan bearing replaced. $2000 5/24 yoke cylinders rebuilt. $500 5/24 new belly belt and all new parts associated with except the pulley drum. Shaft, b-locs and bearings replaced. Also metal siding and skirt. $8-10,000 6/24 2 new turbos. $12,000 6/24 new fan motor and side load adapter. $6500 6/24 feedwheel bearing replaced. Possibly shaft. $1500 6/24 discharge bottom bearings replaced Work done to infeed floor. Belly belt motor rebuilt. 3 injectors have been replaced. 2 out of 3 wiring harnesses replaced. Rebuilt fan motor. Has newer grates. (2) 8” hex. (2) 7x16 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

75 Hp. Ford Diesel, 1548 Hr. 14" chipper mouth. Road ready with pimple hitch. Runs and operates like New. Call for more info 607-967-7569

2016 Morbark 4600XL Horzontal Track Grinder, Cat C27 with 7,500 hours, Magnetic Head Pulley, Radio Remote. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Morbark 6600 Wood Hog Horzontal Grinder, 8461 frame hours, New Cat C32 1200hp engine 1000 hours ago, New C32 was installed at 7500 hours, PT tech hydraulic clutch, Magnetic head pulley, Radio remote. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Morbark 6600 Wood Hog Horzontal Grinder, Cat C32 with 8400 hours, Parked it 6 months ago. It ran until it was parked. Remote works. Known issues: Needs muffler Needs pto O ring Under side of yoke needs to be cut out and new plate put in. It ran till the day they cut it off so I’m sure they can get it running fairly quick. Needs a good amount of welding work under the yoke and around the mill. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Morbark 5'x5' chip screen with a 36" 30 Hp chip blower for two trailers. $6,500 OBO

2012 Morbark 3800XL Caterpillar C18 – 700hp 5807 machine hours. Recent rebuild on the Cat engine. New mill components.

Morbark 58" 3K Chipper w/150Hp 1725 RPM Motor

30" Morbark Chip Blower. Located in SD. #C946

2006 Morbark 6600 Horizontal Grinder with 5,000 hours on Cat 3412 Motor with 1050hp. Brand new ecm with new wiring harness. New engine at 18,884 hrs., new torque hub at 21,500 hrs. New Mill bearings in 2021, new clutch in 2020, fairly new belt. 250 hrs. on rods and half hammers, 700 hrs. on fan pump. Will need floor chains and wear plates soon. Grinder has been well maintained. Gross weight wheeled 91,440 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Morbark chip blower, approx 36" dia, electric drive, comes with single loading pipe, excellent condition

2018 Morbark Model 4600XL Track Horizontal Grinder, Engine is a Caterpillar C-27 1050 HP Engine. Has 2,400 Hours of Running Time and 1,000 Hours Idling time, Undercarriage is 95%, Wireless Remote Control, Air Compressor, Metal Pully on Discharge Conveyor, Various Screen Sizes Ready to Work. Gross weight: 88,640 lbs. Length: 45” Height: 11’11” Width: 11’3” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

CAT V12E, 750HP DIESEL, FOLDING DISCHARGE CONVEYOR, HYDRAULIC REVERSING FAN, AND TRI-AXLE CARRIER. IN GOOD CONDITION.

Morbark Drum Chipper - 20 HP Electric Motor - New drum, knives (2), and wear plate - 23' Belt Conveyor - Hydraulic pump with hydraulic powered feed roll - Perfect for edging strips or stake/kiln stick waste Call 800-459-2148 for more info.