Equipment For Sale
10643 Results Found
Call for Price
$ 12,000
$ 69,000
SolaGen 650,000 BTU / Hour Pellet Boiler - Complete System with Scafco 12 ft Diameter 1540 Cu. Ft. Storage Silo. Decommissioned from Pool Heating when natural gas main was installed and available in town. Equipment includes all factory components, control panel and 3 phase panel, pumps, plate heat exchanger, expansion tank, valves. FlexFlo pellet feed system. Ash auger moves ash to outside bin. Full Set of factory manuals included. Several tons of pellets in sealed totes available. Silo can be included or excluded, depending on transport options. $69,000
Call for Price
Selling a complete Planermill Line -Infeed, tilthoist, landing table, pineapple feed and transfer. -Stetson Ross 6-10-A1 Planer/Moulder c/w assortment of changeable 12 knife side heads can dress up to 6” thick, 8 knife top/bottom heads, 12” wide. Moulder heads with plenty of attachments. -Outfeed Belt, Slowdown Belt, accumulation transfer, lug loader, board turner, Canadian Trimmer with an assortment of trim length stops, trim block belts, green chain and stacking carts. Great planermill, ran 120,000fbm per shift when in production. 600V, 3phase, 60Hz system. Call/text for more details
$ 50,000
2015 Taylor Forklift 11,761 hours. 28,000LB lifting capacity 2 new tires and 2 new batteries. Strong dry machine.
$ 239,000
2017 Tigercat 625E, 9500 hours, EHS transmission, 45/78x32 front tires at 80%, dueling rings, 28x26 rear tires with 23.1x26 duals at 80%, joystick steering, rotating seat, clock heater, fuel fired pre-heater, LED light package, clean one owner machine. Machine is ready for the woods. $239,000
$ 340,000
2022 Tigercat 234B sitting on a 150 LT Big John trailer mounted to it is a ptd264 CSI dilemma with a 4400 CSI slasher saw on 20 foot cradle. Automatic fire suppression a must-have for insurance companies already installed. Our meter reads 609 hours. Asking price $340k all reasonable offers considered 765-505-1338
$ 160,000
$ 130,000
2015 Tigercat 724G Freshly painted AND FIXED! DEF deleted, 5502 Bunching Saw, 30.5 tires 75%F/30%R, Fresh Engine/Diff/Hyd PMs, Cold AC, New Skid Plate & Bushings, R&R Hoses to Saw w spiral wrap, Rebuilt Cylinders, R&R Rear Eng Mounts. $130,000 Price negotiable.
$ 149,000
Very nice 2019 Tigercat dual arch skidder. Ran through our shop and everything checks out mechanically. All new pins and bushings. New glass. Joystick control. HD axles with 95% Firestones. Deep rubber 30.5s. Equipment financing and delivery available.
$ 36,000
1997 Timberjack 360 Grapple skidder with winch. Engine completely gone through with new main seals, head, and turbo within last few hundred hours. Front axle ring and pinion replaced around 14k hours. Grapple snubber was line bored and replaced few hundred hours ago. Steering valve was replaced with a new Deere valve. Doesn't have A/C but comes with a new heater blower unit for the cab. Comes with 4 ice chains and is ready to pull wood. $36000 585-739-1011
$ 30,000
Timberjack 240A, needs nothing, very good condition. $30,000 Located in NJ Call Scott 609-577-3949
$ 55,000
1997 Timberjack 460, New Tires, Runs Good, $55,000 obo or or Trade for a Loader Truck or Skid Loader · 563-599-9191
$ 60,000
2004 Timberjack 360 D Cable skidder 540 John Deere engine New turbo New head New injectors New computer, updated mounting kit. Rebuilt winch, New Diamond chains used once. center pin tight and dry. Good Machine needs nothing. Ready to work! Price Reduced! $60,000 OBO Must Sell!!
$ 19,500
2001 Timberking TK711HD Feller Buncher - Cat 3126 Engine, 2nd owner, owned since 2006, 5,000 org. hrs, New bottom chains/sprockets/rollers. A/c, Heat and spare parts $80,000 · Call 732-271-9658
$ 14,995
Talon 900 Edger, Extremely low hours, used by a hobbyist. The Talon 900 Edger comes fully portable, with six press tires on infeed/outfeed, four side-wind support jacks, and a 27HP power plant for a price that’s about the same as competing, roller-table machines. Specifications: Max Width of Passage 21 inches, Max Cutting Thickness 3 inches, Max Width of Cut 16 inches, Shortest Stock 40 inches, Blade Diameter 12 inches, Arbor Diameter 1.5 inches, Feed Speed Variable, 40-60 FPM, Horsepower 27HP Electric Start V-Twin, Table Height 34 inches, Edger Length 15 feet, Conveyor Length (Infeed) 52 inches, Conveyor Length (Outfeed) 52 inches, Weight 1240 lbs., Price $14,995 OBO - Call 828-779-7102
2021 Timber Pro 725D, 3550 Ryan Dangle head. Well maintained, pins tight, Good condition. Used daily. $350,000 For more details please call 618-922-4016