Equipment For Sale

Morbark 640 debarker; steel control cab; 100 hp on head; 60 hp. On hydraulics Morbark 16ft log trough outfeed conveyor w/hydraulic drive Morbark 25ft log trough infeed conveyor w/hydraulic drive

Morbark S/N 8469 25' log trough conveyor w/ 3-arm 2-way hydraulic log kickers and hydraulic drive

Morbark 640 Debarker System 3 Strand Log Infeed to Infeed Trough Debarker Head with Cab & Controls Outfeed Trough 3 Arm Kicker & Bark Conveyor.

2016 Morbark Beever M12D 1,237 Hours Auto Feed 89hp Power Solutions International (PSI) 3.0L gas motor TorqMax Feed Wheel Compression System Hydraulic Lift Yoke Cylinder 53" Folding Feed Table 18" x 12" Throat Capacity Fully serviced with new fluids, filters, tires, wheels, knives, battery and rain cap 360 Degree Rotating Adjustable Chute LED lights

1992 Morbark Model 27 Whole Tree Chipper Cat V12 800 HP Engine Currently in production PRICE REDUCED

2016 Morbark 6600 Track Horzontal Grinder, Cat C32 1200 hp with 10,022 hours, Radio Remote, Magnetic Head Pulley. Work done. 5/23 fan pump replaced $8000 6/22 poclain feedwheel motor replaced. $20,000 4/24 Fan bearing replaced. $2000 5/24 yoke cylinders rebuilt. $500 5/24 new belly belt and all new parts associated with except the pulley drum. Shaft, b-locs and bearings replaced. Also metal siding and skirt. $8-10,000 6/24 2 new turbos. $12,000 6/24 new fan motor and side load adapter. $6500 6/24 feedwheel bearing replaced. Possibly shaft. $1500 6/24 discharge bottom bearings replaced Work done to infeed floor. Belly belt motor rebuilt. 3 injectors have been replaced. 2 out of 3 wiring harnesses replaced. Rebuilt fan motor. Has newer grates. (2) 8” hex. (2) 7x16 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

30" Morbark Chip Blower. Located in SD. #C946

Morbark 58" 3K Chipper w/150Hp 1725 RPM Motor

2018 Morbark Model 4600XL Track Horizontal Grinder, Engine is a Caterpillar C-27 1050 HP Engine. Has 2,400 Hours of Running Time and 1,000 Hours Idling time, Undercarriage is 95%, Wireless Remote Control, Air Compressor, Metal Pully on Discharge Conveyor, Various Screen Sizes Ready to Work. Gross weight: 88,640 lbs. Length: 45” Height: 11’11” Width: 11’3” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

48" 6 knife chip-pac, includes 5' x5' shaker screen, electric drive, includes soft start, numerous spare knives and parts, good working condition

2016 Morbark 4600XL Horzontal Track Grinder, Cat C27 with 7,500 hours, Magnetic Head Pulley, Radio Remote. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Morbark 6600 Wood Hog Horzontal Grinder, Cat C32 with 8400 hours, Parked it 6 months ago. It ran until it was parked. Remote works. Known issues: Needs muffler Needs pto O ring Under side of yoke needs to be cut out and new plate put in. It ran till the day they cut it off so I’m sure they can get it running fairly quick. Needs a good amount of welding work under the yoke and around the mill. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

MORBARK 4600XL Portable Drum Chipper - Good used machine. Can be used as a hog/grinder or a chipper. Presently set up as a chipper.

2002 MORBARK 30RXL WHOLE TREE CHIPPER ENCLOSED CAB WITH HEAT AND AIR CAT V-12 MORLIFT 1000 BOOM READY TO GO

MORBARK 27RXL WHOLE TREE CHIPPER BAD MOTOR V-12 CAT LOTS OF NEW PARTS DISC SHAFT BEARINGS DECK CHAIN AND SPROCKETS JUST WENT THRU CHIPPER AND MOTOR THREW A ROD LOTS OF NEW PARTS JUST NEEDS MOTOR

Morbark 17' 4 Strand Transfer with SNL and Nose Skid (#10)

Morbark 640 System Log Deck, Infeed Trough, Head Cab & Controls, Outfeed with 3 Arm Kicker, Bark Conveyor.

The Morbark Chip Blower is a robust and reliable piece of equipment designed for efficient handling of wood chips. This used blower is equipped with a powerful 21 horsepower electric motor, ensuring effective performance in various industrial applications. The blower features a 40-inch diameter, which aids in the smooth and rapid movement of materials. Despite being pre-owned, this Morbark Chip Blower is in very good condition, demonstrating its durability and the high-quality craftsmanship typical of Morbark equipment. It is suitable for operations requiring robust material handling, offering dependable service with its sturdy construction. Ideal for facilities that handle wood processing or need efficient chip handling, this blower offers a cost-effective solution without compromising on performance or reliability. Whether upgrading your equipment or expanding capabilities, the Morbark Chip Blower provides a practical option.

Morbark 58" 6 Knife Chip Pac

The complete Morbark debarker setup offered includes essential components for efficient log processing. It features log troughs that are fully hydraulic, with dimensions of 54" x 25' and ladderback chain. The hydraulic drive, along with a feed roll head, ensures smooth operation. The outfeed log trough is also fully hydraulic, complemented by a 26' hydraulic barn sweep equipped with 12" paddles for effective material handling. A Choremaster hydraulic barn sweep and a substantial 36" x 32" x 33" hydraulic tank with a pump are included for robust support. An 80" x 10' x 82" cab, accessible via steps, offers protection and visibility for operators. Critical to its operation is the 60 series Detroit diesel engine with 16,758 hours logged, providing reliable power. A 275-gallon fuel tank is included, although it may have a small leak that should be addressed. This used debarking setup is suitable for forestry and sawmill operations requiring dependable machinery to handle large-scale debarking tasks efficiently. For any inquiries or further details, interested buyers may use the alternate contact number provided, 607-438-7948.