Logging Equipment For Sale

2016 Tigercat 822D, new motor at 4,000 hours, 36" tri track at 60%, brand new 28" Berco tracks 5400 saw head 340 degree, Webasto heater, clean straight one owner. $239,000

Just in - Call for details

2012 Tigercat 610C -17864 frame hours -Previous owner did engine -40,000lb winch -Very tight machine -Tires 85% percent -Has a new front axle replaced in Feb 2024

1999 Tigercat 630B -14000 frame hours -4200 on 8.3l Cummins -New fuel filter -Greased -Two boom cylinders will be needed re-repacked -Top center pin is a little bit loose but almost don’t notice yet Functional woods ready skidder

TC 5702 Sawhead, 110-degree wrist. 36” tri trac, less than 50% u/c

2018 TigerCat H855D -8800+ hours -Waratah 624c head -Tight and dry -Uc in great shape Ready to work

2009 TigerCat 845C -14000+hours -Uc 50% -5702 360 head -Disk in good shape -Woods ready

2016 Tigercat 830D Feller Buncher, Includes Tigercat 5702 360 Degree Saw Head, Enclosed Cab with Heat and Air Conditioning, Undercarriage 55% to 60%, Fire Suppression, Ready for the woods. Operating Weight W/O Attachment 72,003 lb Overall Width 10.93ft in Height To Top Of Cab 12.24ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

CSI PTD264 delimber & Pitts carrier included. CSI DL-4400 saws shown are not included.

2012 Tigercat 822C Track Harvester with 12,654 hours, Log Max XT7000 processor head. Operating Weight 69,070.9lb Overall Width 11.16ft in Height To Top Of Cab 12.24ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Tigercat 620D Grapple Skidder, Winch, Has Cummins Engine, 1,250 Hours, Tires are 35.5, Dual Rings on on Rims, Enclosed Cab with Heat Air Radio, Every Pin and Bushing Replaced on the machine, New Parking Brake, Glass is Good, Exhaust Good, All Arch Pins Lined and Re-bored, Ready for the Woods. DIMENSIONS with standard tires and arch LENGTH 23'9" WIDTH 11' HEIGHT 10'4" WEIGHT 36,250 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Tigercat 822C Processor with 24,000 hours. Includes a Logmax 7000 Processor Head, Machine Runs Stong, Undercarriage 60%, Version 5 Computer, Engine was rebuilt at one time, Heat and Air Conditioning in Cab Ready for the Woods. Operating Weight W/O Attachment 54,000 lb Overall Length 14.59ft in Overall Width 10.93ft in Height To Top Of Cab 10.93ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

35.5 tires, winch, 17' grapple, serviced and ready to work.

30.5 tires, winch, dual arch 15' grapple

TC ST5702 FELLING SAW S/N 57T0349, TELEMATICS, 340 DEG HI TQ HI ROT WRIST AND BOOM

This 720E Tigercat is in good condition it has 28L-26 tires with dually plates. We will be willing to sell the cutter head off it for $15,000 separate. Or if you want a smaller head for this machine we will swap out the head for a smaller one free of charge. This cutter is located at 467 St Peter St, State Line, Mississippi If interested in more details call Gavin 601-394-7796 Tim 251-366-3237 Kameron 251-242-5493

2021 Tigercat 630H -6047 hours -Brand new rear end -Still working in woods -Can provide service records -35.5 tires 2 Brand new tires on the rear -Blows cold air -DEF deleted

2007 Tigercat 720E, runs good but does need a saw disk. We plan to put a disk on it. So it'll be ready for the woods when purchased. Located on our yard at 437 Saint Peter Street State Line MS 39362 For more information you can call Gavin 601/394/7796 Call or text - Tim 251/366/3237 Kameron-251/242/5493 ALL SALES ON USED EQUIPMENT ARE CASH, CASHIERS CHECK OR BANK TRANSFER.

2009 Tigercat 845C Feller Buncher, Tigercat 5702 22" with 360 Degree Head,14.000 Hours, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 50% Ready for the Woods. Weight 57,100 lbs Length 16 ft 2 in Width 10 ft 9 in Height 11 ft 0 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Tigercat 718E, 11,500 hrs., Cummins Engine, Good 28L-26 Tires, Disc is in good shape, Ready to work, $45,000