logging Equipment For Sale

2017 Komatsu 931XC Processor, Equipped with a C144 Processor Head, 10,800 Hours, New Main Hydraulic Pump, New Fuel Injection Pump, 1 Set of Eco Tracks, a second set of Evo Tracks on Rear, Ready for the Woods. Weight: 48,281 lbs. Width: 9 ft. 1 in Length: 26 ft. 4 in Height: 12 ft. 11 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Komatsu 931XC Track Unit, Includes C-144 Processor Head Attachment, Computer System, ONLY 2,000 Hours, Pre Heater, Enclosed Cab with Heat and Air Conditioning, Machine is Like New Ready for the Woods. Operating weight 48,281 lbs Transport length 26.31 Transport width 9.8 Transport height12.92 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Komatsu 931XC, 8 wheeled harvester equipped with a C-144 dangle processing head. Has 10,060 hours. Comes with 2 set of tracks, fire suppression system. Machine is work ready. Asking $295,000 603-723-2953

2017 Komatsu 931XC-2 Processor, approximately 8000 hrs., C144 Head, very woods ready, $229,900 Trades Welcome

6-WHEEL HARVESTER 650/65-26.5 FRON TIRE - 700/70-34 REAR TIRES 2011 KOMATSU 370 24" PROCESSOR/HARVESTOR WITH ROTATING LIKE ATTACHMENT (SN: 370022438), COMPUTERIZED MEASURING FEED ROLS, TOP SAW

2013 Komatsu 941.1 Harvester with 10,520 hours. New hydraulic pumps for crane and drive also a new drive motor ar 10,200 hours. Equipped with a Komatsu 370.2 head, overhauled at 9,000 hours. A second 370.2 spare head is included. Operating weight 51,809 lb Transport length 26.5 ft Transport width10 ft Transport height 13 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

HUGE INVENTORY of Main & Stick Booms for Timbco, Komatsu & TimberPro! Also Squirt Boom for 830B and Timbco/Komatsu.

LOEWEN 08 FELLING HEAD ROTATOR FITS KOMATSU -3 CONFIGURATION FITS KOMATSU/TIMBCO BAR SAW ATTACHMENTS

2006 komatsu pc200-7 Waratah 622b processor -Rebuilt pumps about 4100 hours ago -Rebuilt motor about 4100 hours ago -80% under carriage -Sprockets idlers Boom cylinders were all repacked -622B Waratah Processing head -Has new monitor -New head module -New cab module -New saw motor -Machine Runs and works great And is dry Cuts up to 28"

2006 KOMATSU PC200LC LOGGING PROCESSOR -Rebuilt pumps -Rebuilt motor -80% under carriage -sprockets idlers Boom cylinders were all repacked -622B Warthoug Processing head -has new monitor -new head module -new cab module -new saw motor -Cuts up to 28" timber

KOMATSU PC238 ROTOBEC 3045 WITH SAW TOP AND FRONT CAB GUARDING

2019 Komatsu WA380 Loader. 6382 hours. WELL MAINTAINED. LOCATED IN TAZEWELL, VA. CONTACT ZACH KITTRELL FOR MORE INFO. 931-224-0699

2020 Komatsu XT430-5 -5500 hours -Logmax 7000XT -UC 70% -Tight and dry -Downsizing ready to work

2016 Komatsu 430 Feller Buncher, Equipped with a Quadco 22" 360 Degree Wrist, NEW UNDERCARRIAGE, Hours are 8,800, Non Def Engine, Espar Heat, Enclosed Cab with Heat and Air Conditioning, New Swing Bearings, Pump, New Sensor for ICAN, New Starter and Fuel Pump. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Quadco 22SC Sawhead

2015 Komatsu Xt 430-3 Feller Buncher -8900 hours -New UC -Fire suppression redone in march -Rebuilt pumps -Rebuilt rotation manifold -TIght and dry -Quadco 22" head(8900 hours) -360 degree tilt Woods ready

2015 Komatsu XT430-3 Logging Processor with 9,700 hours has a Wartah 616c head topping saw. Under carriage and the oil cooler recently updated. Have some spare head cylinders and a feed wheel motor to go with it. As well as a burnt parts machine with good track motors, final drives , stick cylinder, stick boom with tele boom. Good working machine ready for production! Length 25 ft 2 in Width 10 ft 4 in Height 11 ft 9 in Weight 62,240 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Komatsu XT430-3 Processor with Skidmore CF21 Head, Approx. 7300 hrs., Undercarriage @ 70%, Head has Approx. 2500 hrs., $249,950 Trades Welcome

2021 KOMATSU XT430-5 FELLER BUNCHER 4,400 HOURS QUADCO HEAD GOOD UNDERCARRIAGE CUMMINS QSL9 ENGINE 70,000 LB OPERATING WEIGHT VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2014 Komatsu 445XT-L Feller Buncher, Machine has 12,000 Hours, Engine is Cummins 8.3 300 HP, Quadco 22" 360 Degree Head, Undercarriage is 75%, Enclosed Cab with Heat and Air Conditioning, Leveling Cab, Ready for the Woods. Weight 72,091 lb Height 14' 1" Width 10' 8" Length 29' 0" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.