Logging Equipment For Sale

2015 Cat 574 8WD Forwarder, 1 Set ofClark Tracks, New Complete Long Block Engine from Cat, Good Rubber, Clean Machine inside and out.

CTR 426, Hydraulic Crawler Trailer, GLK55 Grapple

CTR 426, crawler trailer, GLK55 grapple, serviced and ready to work.

JUST IN CALL FOR DETAILS

We have 2 complete bunks for a Caterpillar/Fabtek forwarder. They are for narrow machines like Cat 534/544 or Fabtek 344B/346B. The price is for one complete bunk (2 stakes & 1 base) $1000 each.

2015 CAT 525D, 7960 hrs., Heat/AC, dual arch, winch 30.5L-32 tires at 75%, panel are all nice and straight, $79,500

2009 CAT 574, 5438 hrs., 1 owner, 8 Wheel Cat 574 w/ John Deere D/A grapple, 2 sets of tracks, great option for soft ground conditions, to reduce ground pressure, or when the 8 wheel drive traction is needed, $149,500

1241 mm (48.8 in) Dual Bale Tines with IT Interface Rate Capacity (2,204 lb) Used for lifting and stacking of hay and straw bales.

AM FM RADIO CAT HH75 Processing Head COMPUTERIZED STEM MEASURING SYSTEM FIRE EXTINGUISHER HARVESTING HEAD WITH TOPPING SAW LIGHTING Online Owner's Manual Regulatory Marking STICK, EXTENDABLE TA-1 INSPECTION ON FILE TA1 Inspection On File TIRE CHAINS TIRE TRACKS ULTRA LOW SULFUR DIESEL FUEL WHEELED

60" TINES 98" WIDE CARRIAGE 52" TALL CATERPILLAR CONSTRUCTION FORKS MATERIAL HANDLING ARM NOT INCLUDED SOLD AS IS

2010 CAT 525C Skidder, Newer Model, Runs Very Good, $40,000 - Call Tom: 272-223-1324 or 570-889-3636

2004 Caterpillar 521 Hotsaw Approx 11k hours Great undercarraige Runs and operates good

1998 Caterpillar 525B Grapple Skidder, No Winch, 12,700 Hours, Tires are 30.5 x 32, Good Tread, New Hydraulic Pump, Axle has New Bearings, Center Section is Tight, Front Axle Bearing Replaced, Two Seals in Cylinder Replaced, New Bearings in Cradle, Ready for the Woods. Operating Weight 35,800 lb Overall Length 21.29ft in Overall Width 11.11ft in Height To Top Of Cab 10.61ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

FACTORY WARRANTY THROUGH 8/5/23 FITS 305-306 CAT NEXT GEN MACHINES INCLUDES 585-0454 JUMPER LINES 5850431 WIRING HARNESS INCLUDES S40 24” HD DIG BUCKET, AND 48” S40 DC/ GRADING BUCKET Online Owner's Manual REQUIRES 570-7210 MULTIFUNCTION JOYSTICKS TRS6 – PART NUMBER 5858423 (PIN ON TOP) S40 BOTTOM WITH GRAPPLE TINES

FUSION INTERFACE INCLUDE: MILLYARD TOP CLAMP AND CONNECTOR LINES FROM COUPLER TO THE TOOL. LOG & LUMBER FORK 72" Online Owner's Manual REQUIRES:3RD VALVE,CONNECTOR LINES FROM MACHINE TO MACHINE TO COUPLER

FOR USE WITH FUSION QUICK COUPLER GRAPPLE AREA: 1.7 M2 2.03 YD2 Online Owner's Manual OVERALL HEIGHT CLOSED-OPEN: 1620MM (64") - 2664MM (105") OVERALL LENGTH: 1981MM (78") TINE LENGTH 1372MM (54") OVERALL WIDTH: 1800MM (70"), INCL. LINES AND "TURN TO CONNECT" QDS REQUIRES: 3RD VALVE ON MACHINE

CAT G126 Contractors Grapple FOR USE WITH: "CB" Linkage FOR USE WITH: PIN ON OR PIN GRABBER COUPLER Online Owner's Manual

54" TINES CATERPILLAR 86" MILLYARD FORKS FOR USE WITH: Fusion Quick Coupler and 938K/M only FUSION INTERFACE GRAPPLE AREA: 1.72 YD2 INCLUDES LINES AND "TURN TO CONNECT" QDs MAX OPENING BETWEEN CLAMP AND TINES= 84" REQUIRES: 3RD VALVE ON MACHINE SOLD AS IS

CATERPILLAR G149 CONTRACTOR GRAPPLE CATERPILLAR PART NUMBER 590-1869 INCLUDES PINS SOLD AS IS TB LINKAGE

Back half off a Caterpillar 544. Will work for Fabtek 346B & Prentice 2346. Everything in pictures are included. 600mm tires & rims , Fab05 bogie assembly , Frame , Center knuckle , Center bearing & Frame lock cylinder. We also have 2 sets of bunks for sale , so you can turn your 4 wheeler into a 6 wheeler.