Equipment For Sale

SANDMAN DL7236 Downdraft Sanding Table;The SANDMAN Sanding Table is a dedicated sanding station that doubles as a workbench. -- 72" X 36" Rubberized work surface. -- 1.5 HP T.E.F.C. 220V 1-Phase motor with 10-5/8" LAU blower with sealed ball bearings. -- Industrial casters with 4" wheels, (2) ridged, (2) swivel-lock 2-ways. -- Hinged tilt-up top with gas strut lid support for easy filter servicing. -- Adjustable in height from 34" - 38". -- Grid system top adds versatility. -- 10.4 Cu. Ft. of built in storage area with 1 pull out shelf. -- 18 Months Limited WarrantyNOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.

SANI-TECH - SC1040/30, ...Auger Compactor -- Motor: 10 HP. -- Hopper capacity: 4.3 Cubic yards. -- Auger RPM: 10. -- Displacement rate: 270 Cubic Yards/Hour. -- 20-Yard Compactor

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! Enclosed cab w/ Heat, A/C, USB Radio, & Transparent Roof, ,Isuzu AJ-4J Engine W/ 104hp (77.0kW), 2"" Seat belt & Air Suspension Seat!, Rear View Camera, Cabin Lights, , 24"" (600mm) Trackchain, Thumb Wheel Auxiliary On Both Joysticks, 15’1” (4.60m) Boom, 8’2” (2500m) Arm, Bucket, Fuel Capacity: 63.2gal (240L) Operating Weight: 32,783lbs (14,870kg), Transport Length(ft/in): 25’3” (7,700mm), Transport Width(ft/in): 8’6” (2,600mm), Transport Height(ft/in): 9'3"" (2,815mm) Shipping Not Included- Call For Pricing!

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! Enclosed cab w/ Heat, A/C, USB Radio, & Transparent Roof, ,Isuzu AJ-4J Engine W/ 104hp (77.0kW), 2"" Seat belt & Air Suspension Seat!, Rear View Camera, Cabin Lights, , 24"" (600mm) Trackchain, Thumb Wheel Auxiliary On Both Joysticks, 15’1” (4.60m) Boom, 8’2” (2500m) Arm, Bucket, Fuel Capacity: 63.2gal (240L) Operating Weight: 32,783lbs (14,870kg), Transport Length(ft/in): 25’3” (7,700mm), Transport Width(ft/in): 8’6” (2,600mm), Transport Height(ft/in): 9'3"" (2,815mm) Shipping Not Included- Call For Pricing!

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! 78,264 lb operating weight! 280 hp tier 4 diesel engine!

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! Enclosed cab w/ Heat, A/C, USB Radio, & Transparent Roof, ,Isuzu AJ-4J Engine W/ 104hp (77.0kW), 2"" Seat belt & Air Suspension Seat!, Rear View Camera, Cabin Lights, , 24"" (600mm) Trackchain, Thumb Wheel Auxiliary On Both Joysticks, 15’1” (4.60m) Boom, 8’2” (2500m) Arm, Bucket, Fuel Capacity: 63.2gal (240L) Operating Weight: 32,783lbs (14,870kg), Transport Length(ft/in): 25’3” (7,700mm), Transport Width(ft/in): 8’6” (2,600mm), Transport Height(ft/in): 9'3"" (2,815mm) Shipping Not Included- Call For Pricing!

SAS SCORPION ENGINE PULLER Model SC40 DescriptionIncrease cash recovery from your recycling operationsSAS Forks Scorpion High Speed Motor Puller – Scrap Yard Engine Puller – Auto Recycling Engine Puller – Excellent for self service yards processing vehicles before crushing.Generate revenue:Process end of life vehicles in less than 60 seconds.Pull scrap engines and transmissions in 30 seconds.30% more revenue by separating metals from bodies.1000% more revenue per lb. on wire harness from engine compartment and dash.80% more visibility with a direct line of site from the operator’s window through the forks.Cycle time less than 15 seconds from park to full extension.Serviceable for long life. Replace blades in 3 hours or less.estimated only.Engineered & built for optimum performance:Engineered tough for continuous prying and durability.Hardened pins and bushings and grease-able pivot points for extended service life.Hydraulic hoses and cylinders are protected to minimize potential damage from sharp objects.Built with high strength blades and carriage skid plates for extended service.Clean up of ground debris is a snap with center plow blade.Speed is paramount in this design. Operator uses grapple from the cab, no torches, no personnel needed to hook up chains to pull or move engines. Safer, quicker and less costly removal of engines and transmissions.

4 MOVING KNIVES 1 FIXED CARRIER SIZE 12-20 TON MAX DELIMB OPEN 24" MAX FULL COVERAGE 14" MAX ROLLER OPEN 24" MIN CLOSE 1 1/4" SATCO 214 PROCESSOR SOLD AS IS

Saturn Model 36x20 Slow-Speed Shredder --36" long x 20" wide chamber opening --1/2" knives. -- KYB MRH-30-SW2 hydraulic system powered by a 50-hp three-phase electric motor. --Comes equipped with stand and controls. -- Excellent for plastic, E-scrap, rubber, small tires, paper, cardboard, light metals.

SAVI HFK-250 Veneer Guillotine; General Specs: -- 102.4" (2,600 mm) Width cap., 4" daylight opening, hydraulically operated knife, 4 HP Leroy-Somer motor powers hydraulic unit with reservoir. -- Originally fitted with motorized parallel fence with 0.5 HP two speed gearmotor drive, push button operated, adjustable from 1" - 50" with magnified tape reader in front of machine. -- Equipped with: 2nd Cut feature with automatic reset, laser guide line light, photoelectric barrier guard for knife & hold-down beam, 2-hand operation of knife cycle. -- Note: Rear fence has been removed or modified. Shaft has chain/sprocket.

HELLE Sawtech Setworks! Ready to Ship!

Manufactured by the Morgan family. 3 phase, single phase or line shaft. Hopper feed w/adjustable fence. Feed rate - Adjustable 120-400 FPM. Capaity 3/8" to 3 1/2"H x 6 1/2"W. Two nylon or steel brushes. The video shows a four head Morgan Band Resaws in-line with a Morgan Board Deduster.

Manufactured by the Morgan Family that brought you the Original Low Profile Band. Available with or without a return. Hands free return eliminates one operator, saving you on labor. Standard 72" return length . Three phase or single phase electric, gas or line shaft models available. Has two quick sets for conveyor height. Other models available are two, three or four head band resaws. Sawmill Supplies & Equipment is proud to be a small town family owned business. Owned by the Morgans and located in Sarepta, La. Need parts for your Morgan equipment? Give us a call. Tell us what you want and we build it. Standard and Custom equipment available.

5HP motor on 10" blades..1HP on feed..1/2" to 2" board thickness..22" to 60" length of cut..Available in three phase or single phase. Sawmill Supplies & Equipment is proud to be a small town family owned business. Owned by the Morgans and Located in Sarepta, La. Still building the ORIGINAL Low Profile Band Resaw. Need parts for your Morgan equipment? Give us a call. Tell us what you want and we build it..... the RIGHT way! Standard and Custom equipment available.

Manufactured by the Morgan family that brought you the original low profile band is the Wide Cut Resaw. Some available options include hands free return, multiple heads or a line shaft for the customer to supply power. It has 29" diameter solid steel band wheels, a 1-1/2" wide band and a 30 hp motor on a cutting head. The hold down wheels and feed conveyor are powered by a 5 hp hydralic unit. Cutting capacity is 14" wide with a ridged 12" wide UHMW covered infeed conveyor. There is a 1/2" - 6" adjusatble cutting depth capacity and virtually unlimited cant height restrictions.

Variable feed speed up to 100fpm with powered infeed and outfeed belts. Very accurate with quick adjust to edge 3 1/2" boards to 16" boards with 1/8" increments. Cuts up to 2 1/4 height and will pass up to 30" wide flitches. Single or 3 phase electric. 10hp on blades / 1hp on feedworks. Optional tables on infeed and outfeed. Call (318)994-2116

Manufactured by the Morgan family is the Military Band Notcher. Hydraulic adjustable feed, 5hp motor, indexable carbide cutters, adjustable width & height. We can custom build to fit your needs. Need parts to fit your Morgan Saws? Give us a call. We are still building the ORIGINAL low profile band resaw.

Manufactured by the Morgan family. Multi-Head Trim Saw available in 2, 3, 4, or 5 head models. Each comes with 20" carbide blades and 10hp motor per head. Adjustable heads with variable speed feed. Optional larger blades and motors offered. Product and Waste Conveyors custom built to fit your need. Need parts to fit your Morgan Saws? Give us a call. We are still building the ORIGINAL low profile band resaw.

Manufactured by the Morgan Family that brought you the Original Low Profile Band. Available with or without a return. Hands free return eliminates one operator, saving you on labor.Three phase or single phase electric, gas or line shaft models available.Other models available are single, two, or three head band resaws. Sawmill Supplies & Equipment is proud to be a small town family owned business. Owned by the Morgans and located in Sarepta, La. Need parts for your Morgan equipment? Give us a call. Tell us what you want and we build it. Standard and Custom equipment available. The video shows two four head band resaws and a board deduster all in line.

Manufactured by the Morgan Family that brought you the Original Low Profile Band Resaw. Available with or without a return. Hands free return eliminates one operator, saving you on labor.Three phase or single phase electric, gas or line shaft models available.Other models available are single, two, or four head band resaws. Sawmill Supplies & Equipment is proud to be a small town family owned business. Owned by the Morgans and located in Sarepta, La. Need parts for your Morgan equipment? Give us a call. Tell us what you want and we build it. Standard and Custom equipment available.