Strapping Machines Banding For Sale

Banding-Strapping Machines 

Band Mills (Wide) (41) Band Mills (Thin Kerf) (49) Debarkers (82) Edger-Boards (59) Forklifts (51) Gang Saws (55) Hogs and Wood Grinders (238) Log Loaders (1) Portable Sawmills (28) Resaws-Band (169) Scragg Mills (36) Trim Saws (84) Unscramblers (33) Wheel Loaders (88) Wood Chippers - Stationary (145)
Air Compressors (167) Airlocks (25) Banding-Strapping Machines (127) Blowers and Fans (129) Boilers (24) Bolter Saws (1) Carriages (Sawmill) (29) Carriage Drives (Sawmill) (57) Chip Bins (18) Chip Cyclones (24) Chip Screens (42) Chipping Canters (3) Chop Saws (67) Circular Saw Husks (8) Circular Sawmills (83) Conveyors (81) Conveyors Board Dealing (79) Conveyors Deck (Log Lumber) (212) Conveyors General (30) Conveyors-Auger (4) Conveyors-Live Floor (9) Conveyors-Run-Around (4) Conveyors-Vibrating (53) Conveyors Belts (200) Conveyors-Barn Sweep (26) Conveyors-Live Roll (121) Dip Tanks (4) Drum Dryers (21) Dry Kilns (46) Dump Hoppers (8) Dust Collection Systems (270) Edger Tailing Devices (6) Edgers-Gang (46) Edgers-Slab (6) Edgers-Vertical (6) Electrical (156) Gang Rip Saws (119) GenSets (29) Hammer Mills (7) Hydraulic Power Packs (95) Knife Grinders (36) Laser Lights (8) Log Home Machinery (14) Log Merchandising Systems (15) Log Turners (Sawmill) (35) Lumber Carts (20) Lumber Sorters (8) Lumber Stackers (28) Lumber Stickers (1) Mat Equipment (2) Metal Detectors (37) Misc (90) Operator Cabs (31) Package Saws (4) Parts and Parts Machines (8) Plywood OSB and Panel Boards (4) Post and Pole Peelers (21) Power Units-Engines (12) Radial Arm Saws (27) Resaws-Circular (2) Scanning Systems (1) Scissor Lifts (55) Screening Systems (9) Setworks - Sawmill (6) Shapers (1) Sharpening Equipment (115) Shavings Mills (19) Slab Saws (14) Stake Pointers (1) Step Feeders (3) Straight Line Rips (2) Tie Processings (1) Tilt Hoists (16) Wrap and Packaging (6)

Filtering

Reset All 

thru
 Used     New
Viewing Page 6 of 7
127 Results Found
Sort By 
Recently Added Items
CP Manufacturing CD500
Call For Price
CP Manufacturing CD500
2002 Harris WOLVERINE
Call For Price
2002 Harris WOLVERINE
Call for Price

PIQUA - PW72-50, Semi-Automatic Wide-Mouth Horizontal Baler with MAX-PAK ConveyorSpecifications: -- Cylinder: 7" -- Main motor: 30 HP -- Bale size: 48″ x 36″ x 72″ -- Feed opening: 46" x 50" -- Cycle time: 20 Seconds -- Platen force: 86,600 Lbs -- Bale weight: 1,500 – 1,800 Lbs -- Door cylinder: 4" -- Door cylinder stoke: 12"; -- Conveyor belt: 60"Equipped with: -- 60" Infeed Conveyor with rubber belt.NOTE: New Conveyor rubber belt, paint, and safety stickers.

Katie Lechelt
800-374-5009 ext:452
Call

$ 11,490

PTR - PT-330, ...Self-Contained CompactorSpecifications: -- Charge Box cap.: 1.5 Cu/yard -- Container cap.: 30 Cu/yard -- Clear Top opening: (L x W) 41"; x 60"; -- Feed height: 40" -- Hydraulic cylinders: (2); Bore 4"; -- Hydraulic cylinder rod: 2-1/2"; -- Horsepower: 10 -- Cycle time: 31 Sec -- Total normal force: 42,708 LbsEquipped with: -- Standard 3-button controls -- On/Off key switch -- Mushroom stop

Katie Lechelt
800-374-5009 ext:452
Call

$ 11,500

PTR - 2300HD, ...Vertical Downstroke BalerSpecifications: -- Cylinder bore: 6"; x 3-1/2"; -- Feed Height: 54-1/2"; -- Rod stroke: 48"; -- Baler chamber (depth x height): 30"; x 48"; -- Main motor: 10 HP -- Load opening (width x height): 60"; x 27"; -- Cycle time: 56 Sec -- Systems pressure: 2,000 – 2,700 PSI -- Bale size platen force: 56,500 Lbs

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

PTR - 3600-HDLP, ...Low Profile Vertical BalerSpecifications: -- Bale size: 60" x 35" x 30" -- Bale weight: 600 to 800 Lbs -- Baler chamber: 36" D x 36" H -- Feed height: 33" -- Cylinder bore: 6" -- Cylinder rod: 3-1/2" -- Rod stroke: 27" -- Working force: 67,858 Lbs -- Motor: 10 HP -- Loaded onto your Truck

Katie Lechelt
800-374-5009 ext:452
Call

$ 7,500

PTR - 2507-HD, ...2-1/2 Yard Stationary CompactorSpecifications: -- Charge box capacity: 2.5 Cu/Yd -- Clear top opening (L x W): 54-1/2" x 60" -- Total normal force: 59,376 Lbs -- Cylinder bore: 6" -- Cylinder rod: 3-1/2" -- Capacity per hour: 63 Cy/Hr -- Average cycle time: 57 SecEquipped with: -- Heavy-Duty structural steel components -- 3-Button controls

Katie Lechelt
800-374-5009 ext:452
Call

$ 26,400

REM - PERF-5 MECH, ...Plastic Bottle Perforator -- One Lot: (2) Units -- 24" Wide Heavy Duty perforating drum with: Spring-Loaded pressure plate -- Capacity: 900 Lbs (PET Bottles) per Hour per Unit -- Motor: 5 HP at 1,800 RPM -- (1) Perforator used for 1-Week only; other Unit still in the w!rapper -- No Conveyor -- Loaded onto your Truck

Katie Lechelt
800-374-5009 ext:452
Call

$ 67,500

REYNOLDS - PF-622, ...Paper Bale BreakerSpecifications: -- Main motors: (2) 20 HP -- Conveyor motor: 1/5 HPEquipped with: -- (2) Rotors with adjustable bearing rails for adjustable height. -- Heavy-Duty piano hinge conveyor belt. -- (3) Rows of steel pads welded to the underneath. -- Replaceable teeth and hinged access door.

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

RM JOHNSON - L 2, ...EZ Logger Baler -- Boom: Extra long 27 feet -- Can load out high-side Gondolas -- Grapple: Continuous rotation -- Hood: 7000 Crane with Out Riggers -- Bale chamber size: 84" x 54" x 60" -- Bale weight: 800 - 1,200 Lbs -- 3-Minute bale xycle -- (2) 8" Cylinders

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

SANI-TECH - SC1040/30, ...Auger Compactor -- Motor: 10 HP. -- Hopper capacity: 4.3 Cubic yards. -- Auger RPM: 10. -- Displacement rate: 270 Cubic Yards/Hour. -- 20-Yard Compactor

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

SELCO - HLO-608-A40: Wide Mouth Auto-Tie Horizontal BalerSpecifications: -- Bale size: 48"; x 40"; x 72";. -- Main motor: 50 HP. -- Cylinder: 8". -- Twister motor: 2 HP. -- Cooler motor: 2 HP. -- (4) Tension cylinders: 5" Bore.Available NOW!

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

SELCO HSO-128A50: Horizontal Auto-Tie Baler -- Type: Open end. -- Cylinder: 8". -- Motor: 50 HP. -- Infeed opening: 36" x 28-1/2". -- Bale size: 30" x 40" x Variable. -- Bale weight: Up to 1,200 Lbs (OCC). -- Production capacity: 2 to 4-1/2 TPH. -- Shear blade. -- Hopper size: 36" x 28-1/2". -- Ram face pressure: 103 PSI. -- System pressure: 2,400 PSI. -- Platen force: 120,637 Lbs. -- Cycle time: 11-1/2 Sec (no load).

Katie Lechelt
800-374-5009 ext:452
Call

$ 29,500

SELCO - HL50: Horizontal Closed Door BalerSpecifications: -- Large corrugated wide-mouth Baler. -- Horizontal Closed Door. -- Max. amps: Draw 48 amp; max. motor: 39 amp. -- Max HP motor: 30 HP – 60 Hz – 3 phase. -- Bale size: 72″ x 36″ x 48″. -- Feed opening: 50″ x 46″. -- Main pump: 800 PSI. -- Hydraulic pump capacity: 54 GPM. -- Oil reservoir capacity: 180 Gal. -- Cycle time: 20 Sec. -- Ramface pressure: 68 PSI. -- Baling material weight: 1,500 – 1,800 Lbs. -- Bale volume: 72 Cu. ft. -- Main cylinder: 7″ Bore; 62″ stroke. -- Door cylinder: 4″ Bore; 12″ stroke.

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

SELCO - HL-12-LH: Horizontal Baler with Infeed Conveyor• Motor: 20 HP. • Main Cylinder: 6";.• Hopper Opening: 50"; x 28";.• Cycle Time (No Load): 15 Seconds.• System Pressure: 2,000 PSI.• Total Compression Force: 56,556 Lbs.

Katie Lechelt
800-374-5009 ext:452
Call

$ 49,900

SELCO - HS0-128A, ...Horizontal Auto-Tie Baler -- Motor: 50 HP -- Cylinder: 8" -- Feed Opening: 36" x 28" -- Conveyor NOT included -- Loaded onto your Truck

Katie Lechelt
800-374-5009 ext:452
Call

$ 88,920

SELCO HL60-M Horizontal Closed Door BalerSpecifications: -- Full Penetration. -- Motor: 30 HP. -- Cylinder: 8". -- Feed Opening: 60" x 45". -- Shear Blade. -- Bale Size: 48" x 40" x 72". -- Max: 2,100 Lbs OCC. -- Feeding Cleated Motorized Belt Conveyor: 20' L x 36" W. -- Loaded onto your Truck.

Katie Lechelt
800-374-5009 ext:452
Call

$ 79,000

SELCO - HLO-608-A40, ...Wide Mouth Auto-Tie Horizontal BalerSpecifications: -- Bale size: 48"; x 40"; x 72"; -- Main motor: 40 HP -- Cylinder: 8" -- Twister motor: 2 HP -- Cooler motor: 2 HP -- (4) Tension cylinders: 5" BoreEquipped with: -- Conveyor controls -- Shear bar (tapered & serrated)Available NOW!

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

SIERRA - 700T, ...Shear BalerSpecifications: -- (2) 100 HP Electric Motors -- Preload Table -- Precompression -- Shearing: 14 - 17 Tons per hour -- Baling: 12 - 14 Tons per hour -- Logging: 15 - 17 Tons per hour -- Cylinders: (1) Main Compression ram; (6) folding box rams. -- Cylinder forces: Shear - 700 tons precompression; 115 tons main compression; 160 tons folding box; (6) cylinders @ 80 tons each; 240 tons each side. -- Folding Box Dimensions: 19 ft., 8 in. x 7-2/3 ft. Open: 19 Ft., 8 in. x 32 in. x 24 in. Closed: 34 In. x 22 in.Shear Throat

Katie Lechelt
800-374-5009 ext:452
Call

Call for Price

SIERRA - 700T: Shear BalerSpecifications: -- Motors: (2) Electric 100 HP. -- Preload Table. -- Precompression. -- Shearing: 14 - 17 Tons per hour. -- Baling: 12 - 14 Tons per hour. -- Logging: 15 - 17 Tons per hour. -- Cylinders: (1) Main Compression ram; (6) folding box rams. -- Cylinder forces: Shear - 700 tons precompression; 115 tons main compression; 160 tons folding box; (6) cylinders @ 80 tons each; 240 tons each side. -- Folding Box Dimensions: 19 Ft. x 8 in. x 7-2/3 ft. Open: 19 Ft.; 8 in. x 32 in. x 24 in. Closed: 34 In. x 22 in.Shear Throat -- Disassembled approx. (3) years ago. -- Running when removed from service.

Katie Lechelt
800-374-5009 ext:452
Call

$ 375,000

SIERRA - RB5000, ...Portable Baler/LoggerNew in 2011 - Less than 500 hoursFeatures and Specifications: -- Faster cycle times equals higher production volume. -- Features an easy-to-load loading box that opens to 16’-5"; x 8’-1"; and short-stroke rams that greatly reduce cycle times. These powerful rams crush each load with 240 tons of force per side, producing:Logging production: 16 - 22 Tons per hourBaling production: 10 - 14 Tons per hour -- The "RB5000" is the perfect machine for any scrap yard that receives appliances, sheet iron, smaller automobiles & automobile shells, clips, and busheling as their main source of material. -- The "RB5000" Portable Baler/Logger compresses logs and bales to shredder and mill specifications. -- Typical log density: 25 to 35 Lbs. per cubic foot. Average overall weight: 1400 lbs. -- Typical bale density: 80 to 90 lbs. per cubic foot. Average overall weight: 850 lbs. -- Any transfer station that receives a high volume of appliances and sheet iron can also greatly reduce freight costs by baling and logging. -- The structural details and proper design protect the key components of the "RB5000". -- The solid self-framed construction of this portable baler/logger includes SIERRA’s: Standard L-box shaped design, 11/16th-inch abrasion-resistant steel Hardox 450 liner plates, and outer honeycomb construction creating a greater box integrity and adding to the "RB5000’s" longevity. -- For added versatility, the Crane is independent of the Baler, has a continuous rotation, and is fully operational while the Baler/Logger is in use, increasing productivity. -- The Crane features 24-2/3 Ft. boom length and 4,400 Lbs capacity while fully extended and includes an orange peel grapple with a rotator that was specifically designed to handle bales and logs. The well-designed cab and agronomical controls were designed for comfort, safety, and long-term use.

Katie Lechelt
800-374-5009 ext:452
Call

$ 2,000

StraPack Strapping Machine #00790

 Sturgeon Lake, MN
L & L Sales
218-382-0898
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved