Tigercat For Sale

Rotobec 4552HD grapple, 32" triple grouser pads, high rise cab, fully operational

MLS Number 11471498 1998 Caterpillar 320L Stroke Delimber 21,000 hours Balderson Stroker w/top saw only (Bottom saw missing) Measuring system not working. Mitsubishi Engine – No Blow By – Starts quick Cab w/Guarding. Has heat and AC 36” Pads on 50% Undercarriage Regularly maintained Comes with many spare parts

GLL60 Grapple, Triple grouser pads, serviced ready to work.

2017 Caterpillar 525D Skidder Dual arch No winch 9,000 hours Currently on job working

2017 Caterpillar 525D Skidder Single arch Winch 10,600 hours Cat reman engine with 1000 hours or less Rebuilt tranny with 1000 hours or less Cat updates 35.5 tires (3 are 60-70%, 1 at 20%) Heat AC Nice skidder Working daily

2019 CAT 525D, 11,300 hrs., 30.5 tires in good shape, tight and dry. Ready to go to work, $75,000

2015 Caterpillar 525D Grapple Skidder with approximately 7,500 hour. Winch, 30.5 x 32 Tires at 60%, New Chains in Front, Worn Chains Rear, Previous Owner had Transmission Rebuilt Center Section Good, Ready for the Woods. Weight 45,249 Length:356.3 in Overall width:145.81 in Height: 138 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Caterpillar 525D Grapple Skidder, Only 5500 Original Hours, Enclosed Cab with Heat and Air Conditioning, Winch, Tires are NEW in REAR, 95% in FRONT. New Cable and Slides, New Service Ready for the Woods. Weight 45,249 Length: 356.3 in Overall width: 145.81 in Height: 138 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

This grapple has been reworked in our shop. The grapple has been line bored and the cylinder pin bosses have been fabricated out of new round stock. New pins and bushings through out. Cylinders inspected and repacked. Grapple has been tested. Tight and dry.

CAT 508 Skidder

2015 CAT 501HD TRACKED HARVESTER 6 CYL CAT FIXED FOUR ROLLER HEAD

2012 CAT 501HD TRACKED HARVESTER 6 CYL DEERE FOUR ROLLER HEAD

2008 CAT 501HD TRACKED HARVESTER 6 CYL CAT REBUILT ENGINE BY MICHIGAN CAT WITH WARRANTY FOUR ROLLER HEAD

2007 CAT 501 TRACKED HARVESTER 6 CYL CAT FOUR ROLLER HEAD INDEPENDENT COUNTER

2018 CAT 501HD TRACKED HARVESTER TWO WHEEL CONVERSION ON HEAD

2012 Cat 501 HD Harvester -Prentice PF-48 4 roller head -14666 hours -6.6 Cat engine -Oil changed every 250 hours -New complete undercarriage including rails, idlers, rollers and sprockets at 14000 hours -New injectors at 12500 hours -Set up to run the 3 point measuring just need to buy encoders -Only ran the Wide Skidmore independent wheel -Reinforced welding around the independent measuring wheel, plated and beefed up in all the weak points -Work ready Interior pictures are coming soon!!!!!

2008 Caterpillar 501HD Logging Processor Fabtek Four Roller Head Approx.11,000 Hours Great Little Processor Runs Perfect Good Undercarriage Ready To Work

2009 Caterpillar 501 HD with Processing Head, Equipped with a Prentice PF 48 Processing Head, 13,150 Hours, Enclosed Cab with Heat and Air Conditioning, Undercarriage between 80-85%, Ready for the Woods. Operating Weight 40,000 lb Overall Width 9.34ft in Height To Top Of Cab 11.25ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

CAT 501HD, 11,699 hrs., CALL

2017 CAT 501HD, 8576.4 hrs., PF-48 Prentice Head, enclosed cab, Undercarriage is in good shape, pads 95% remaining, rollers, sprockets/idlers all have 70% remaining, bushings are at 85%, double grouser pads are 8.5" wide and 2' length, $159,500