BioMass Equipment For Sale

2021 Morbark 3000XT Horizontal Wood Grinder on Tracks, 260 Hours, Caterpillar 577 Hp Engine, Caterpillar Undercarriage, Nice!

2006 Morbark 4600 XLT Horrizontal Grinder, Caterpillar C-25 1050 HP Turbo Engine with 11,900 Hours, Undercarriage is 85%, Air Compressor on machine Radiio Remote Control, Metal Pully on Discharge Coveyor, Screens 2 and 3", More Pictures Coming Soon 100% Ready for Work. Gross weight 75,660 lbs Length 42' Height 13'3" Width 10'11" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1050 HP C27 engine, Morlift 500, 3 flail with bark conveyor. Boom cylinder being repacked, one owner, original engine

1992 Morbark 1200 Tub Grinder -10500 hours - 1200 cat 3412 twin turbo 650hp -Mill completely rebuilt and new bearings with 200 hours on it ($33k in repairs) -Replaced turbo pedestal and rebuilt turbos -Entire mill was replaced new with new bearings -Hours are a guess meter says under 1000 I believe so I’m guessing it rolled -Hydraulic cylinders were rebuilt on boom except for squeeze cylinder on grapple -The turn motor on grapple leaks a little -One of the stiff leg cylinders bleeds down for unhooking from truck Ready to grind

2014 Morbark 1200XL-WCL -7571 hours -CAT C27, 875 HP -Cab Loader Option -New Floor -Spare Rotor, Screens, Tips, and Parts Package -Turn Key Ready to Grind

2021 Morbark 30/36 whole tree chipper -1884 hours -Cat Engine -Pintle hitch towed -Extra sets of knives and parts -Factory Engine warranty remaining PRICE REDUCED!!!!!!!

2008 MORBARK 30/36 TREE CHIPPER 5.100 HOURS GOOD DRUM JOHN DEERE ENGINE 500 HP GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

1998 Morbark 1300 Tub Grinder -9000 hours meter doesnt work but has original ecm can read it -Loader -Few minor leaks -Mill in great shape -Augers are freshly hard faced -Belts in good shape -New injectors -Comes with an extra set of new hammers and tub rollers -A/c blows ice cold

1994 Morbark 23WCL 23" disk chipper With loader Good condition Includes: extra (new and used) knives, counter knives, & top plate

Microchipper, recently installed all new pocket liners and hardware. Fully functional, with remote. Ready to go. CAT C15 540HP Advantage 3 Drum- 12 knife Twin Disc Clutch Air Compressor Light Package

400HP, 25" wide drum, original hours

-400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back

860HP CAT 3412. Hour meter shows 2100 hours. Unknown machine hours. All functions work as should.

2009 Morbark 30/36 Tree Chipper -1045 Original hours -C13 440 HP -A/C blows cold -Clean tight chipper

2016 Morbark 1300B On Tracks -3400 hours -1050 hp -Service regulary -Belts are good -Mill and teeth in great shape MORE PICTURES COMING SOON

2007 Morbark Hurricane 18 with loader, Cat CA3116B 250hp T2 Diesel Engine with 1000 hours, Tandem Axle, Hydraulic Front Stabilizer, Large capacity 150 Loader, Dual Rear Stabilizers, Hydraulic swivel Discharge, Flow Control, Tail light guards. Weight: 16,530 lbs Length: 20’ 2” Width: 7’ 4” Height: 8’ 8” 2 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Morbark M20R Track Chipper, Cat 415HP with 5090 hours, Radio Remote, Infeed conveyor, Woods ready. H 11’5” W 8’6” L 22’9” 26,540 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Morbark M18RX 18" Drum Chipper, John Deere 4 cylinder, 4,248 hours, Good condition, Winch, knives. Height:9'4" Width:7'8" Length18'3" Gross weight (approximate):9,550 - 11,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 Morbark 1050 Tub Grinder -4780 original hours -Cummins engine (475 H.P) -Tight and dry -Loader -Tires and lights good -Belts good -Just serviced

1997 Morbark Model 16 Whole Tree Chipper, Enclosed Cab with Heat, No AC, Single Axle with (4) Tires, New Tires and Brakes, Cummins 250 HP Diesel Engine with 2200 Hours, Nice Running Machine Perfect for Clearing Lots Weight 8,500 lb Height 8.8 Width 7.1 Length 17.11 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.