Equipment For Sale

KREG DK 3100 Pocket Hole Boring MachineElectric 3-spindle Pocket Drill; 1.5 HP direct drive electric motor; 39-1/2" table/ top working height; (0.5 - 1) Sec cycle time. -- Drills (2) pocket holes in (1) machining cycle across rails of varying widths with 3/8" dia. step bit in (1) smooth operation.... Drill spindles in the machine are fixed at 3/4" - 1" and 1-3/4" on center allowing it to handle most common rail widths of 1-1/2" up to 3-3/4" with ease. -- One of the (3) Spindles is with left-handed, simply remove one bit from the spindle not being used to set the desired 2-hole spacing. -- The bits are supported all the way to the workpiece by a hardened steel drill guide that ensures tear-out free holes and consistent placement in virtually any material. -- Features: 15° Boring angle for greater stability, reduced screw breakout & splitting. This produces a smaller "flat-bottom" pocket hole with rounded sides that can be plugged with a dowel if desired. -- Includes: Pressure gauge & cycle counter, fence, holddown & clamping assembly, (2) 3/8" cobalt drill bits, and foot pedal control.

Electric Single Spindle Pocket Drill. Specifications: -- Capacity: Materials from 1/2"- to 1 1/2"-thick. -- 1.5 HP direct drive electric motor (also available 1.5 HP direct drive pneumatic motor); 40" table top working height; 1 Sec cycle time. -- Drills the pocket hole with a 3/8" dia. step bit in (1) smooth operation. The bit is supported all the way to the workpiece by a hardened steel drill guide that ensures tear-out free holes and consistent placement in virtually any material. -- Electrical: 110 VAC, Pneumatics: 90 PSI, recommended for clamping. -- Dimensions: 50"H x 24"W x 24"D (40" table height), 176 lbs.Features: -- 15° Boring angle for greater stability, reduced screw breakout & splitting. -- This produces a smaller "flat bottom" pocket hole with rounded sides that can be plugged with a dowel if desired. Includes: -- Pressure gauge & cycle counter, fence, holddown tower, (1) 3/8" cobalt drill bits, and foot pedal actuation.

KREG KFT 4X8 Face Frame Assembly. -- American-Made 4' x 8' Frame Assembly Clamp with floor stand. -- Working surface at approximately 30° angle for convenience. -- Unit includes; (4) Overhead air cylinders mounted on an overhead beam adjustable up-and-down. -- Clamping beam that moves from left-to-right by means of rollers. -- Squaring bars (fences) on the bottom and both ends of the table. -- Clamping beam with an air filter/oiler/regulator and air outlet at lower end of the beam. -- Optional pneumatic screw gun & pneumatic flex hose.

KREG DK 5100 5-Spindle Pneumatic Pocket Hole Machine. -- Individually actuated motors, (5) 0.75 HP motors, mounted on 6" centers. -- Hardened steel drill guides to support drill bit through the operation; 1-touch, foot pedal cycle. -- Swings stops for optimized material positioning; dust collection chutes for efficient chip removal. -- Complete with pre-filter and automatic lubricator.

2023 Kubota Tractor LX2610 SU, Equipped with Grapple Rake Bucket, Bucket, Brush Hog, and Root Rake. Weight: 1,786 lbs Length: 101.8 inches Width: 53.7 inches Height: 88.4 inches Ground clearance: 14.6 inches Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2008 Kubota M108S Tractor 4120 hours 108 HP New tires and tubes on front Rears are good Nice tractor Woods backhoe available

Enclosed cab, Speakers/Radio, AC/Heat

Enclosed Cab Heat And AC Hydraulic Coupler High Flow Hydraulics Only 300 Hours $90K + Replacement

New Kubota SR 76 Rototiller.  Skid steer mount

Kubota U35-4 Mini Ex, Low 875 Hours, Enclosed Cab, 4 Way Blade, Radio, Heat/AC, Manual Coupler, Aux Hydraulics, Clean One Owner Trade In.

Multiple size buckets, currently working, and very good condition.

MLS Number 12783860 2017 Kubota SVL 95 2-S Skid Steer 1300 hours New tracks Grapple bucket Cab heat and AC Runs perfect

2015 Kubota SVL75-2 Track Skidsteer, nice job ready machine

2012 Kubota L3200 Tractor Under 50 hours Includes 6' bush hog Runs great

2020 Kubota MX5400 Tractor, Only 500 Hours, Enclosed Cab with Heat and Air Conditioning, Nice Tires, Ready for Work Nice Condition. Weight 3,716 lb Length 127.8 inches Width 69.7 inches Height 95.7 inches Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2020 Kubota KX71-3 Mini Excavator, thumb, 1995 HRS, VERY NICE MACHINE

2017 Kubota KX080-4 Excavator 11,000 hours AC Heat SN# 40572 Runs and operates great

KUFO UFO-104H1 Dust Collector. Radial-finned 8-bag Dust Collector. -- 6,627 CFM single-stage collection system. -- Heavy Duty 10 HP induction motor. -- Steel impellers that are dynamically balanced. -- Deflection baffles and bag hooks. -- 30-Micron 23-3/4" bag filters. -- Ready to operate with (8) upper filter bags and (2) lower cloth collector bags. -- Plenty of storage space with (2) bottom bags holding 29-3/4 Cu. ft.(Installed dimensions - 91" L x 32" D x 135" H)

KUFO LS-500E Self-contained Dust CollectorDesigned for use in industrial environments for extracting different kinds of dust and dry shavings from single or multiple dust sources. It can be installed directly without any additional fire or explosion protection measures.Features: -- 5 HP Direct drive blower with backwardly curved blades and 2,649 CFM air flow rating; Inlet dia. 10". -- The blower is located on the clean air side. -- Noise reduction cover to reduce from 82 dB. to 76 dB. -- Fire control system with built-in Fire Sprinkler featuring auto-temperature activation (requires a water line hook-up). -- Pulse-jet filter cleaning with compressed air. -- (1) Dust collection tank container.Options: -- Built-in Fire Extinguisher with auto temperature activation -- "Y" Adapter with 9-3/4" inlet opening with 4" x (5) fitting -- Noise Reduction option (76 dB from 82 dB without).

KUFO UFO-103H Dust Collector. With 1-micron dust filtration efficiency this collector will make your shop cleaner, healthier, and more productive. -- (3) Fabric filter top bags are mounted above individual plastic collection bags. -- The multi-bag system is placed on sturdy steel legs in a horizontal series. -- 3,125 CFM Output with single-stage blower. -- Heavy Duty 5 HP motor with push button control and motor starter. -- 14" Steel blower fan impellers are dynamically balanced. -- Collection bag snap-in rings for easy installation and removal of bags. -- Filter bags filter out dust particles down to (1) Micron in size; 6 mil thick plastic bottom collection bags are standard.