BioMass Equipment For Sale

MORBARK 27RXL WHOLE TREE CHIPPER BAD MOTOR V-12 CAT LOTS OF NEW PARTS DISC SHAFT BEARINGS DECK CHAIN AND SPROCKETS JUST WENT THRU CHIPPER AND MOTOR THREW A ROD LOTS OF NEW PARTS JUST NEEDS MOTOR

2016 Morbark Beever M12D 1,237 Hours Auto Feed 89hp Power Solutions International (PSI) 3.0L gas motor TorqMax Feed Wheel Compression System Hydraulic Lift Yoke Cylinder 53" Folding Feed Table 18" x 12" Throat Capacity Fully serviced with new fluids, filters, tires, wheels, knives, battery and rain cap 360 Degree Rotating Adjustable Chute LED lights

1992 Morbark Model 27 Whole Tree Chipper Cat V12 800 HP Engine Currently in production PRICE REDUCED

Morbark 30-36 Portable Chipper 350HP Cummins Approx 4000 Hrs self Feeding Grapple Up to 18" Dia Material

2008 MORBARK TYPHOON 20 CHIPPER -400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back

1996 Morbark Model 20 Whole Tree Chipper ,Caterpillar 425 HP Engine, Enclosed Cab with Heat and AC, Needs a Condenser for the AC, Machine has Separator ,Ready for the Woods... Overall Length 21’6” Overall Width 8’0” Overall Height 13’6” Weight 10,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Morbark Flail 223 Debarker, has a Caterpillar 9.3 that's been deleted. It has 9,249 frame hours and 600 on the engine rebuild. New Hydraulic Clutch Last Year, New Rear Feed Wheels 23" Capacity Ready for the Woods. Length (transport) 33'5" Height (transport) 9'11" Width 9'10" Weight 46,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Cat 3412E 860hp Engine status report shows 43% average load factor, 3317 idle hours. 8899 hours on original engine. Completely serviced and runs properly. Morlift 500 loader with tight grapple, A/C cab all nicely fitted. Auxiliary air compressor Michigan model 40 knife grinder Extra knives Very sound, tidy chipper throughout. Call for complete condition report.

1050 HP C27 engine, Morlift 500, 3 flail with bark conveyor. Boom cylinder being repacked, one owner, rebuilt engine

1983 MORBARK RXL 27 TOTAL CHIP HARVESTOR 5,110 HOURS 600 CUMMINS UPDATED SPREAD BEARINGS RUNS GREAT WORK READY FINANCING AVAILABLE WITH NO MONEY DOWN GRANITEHE.COM

600HP, Advantage 3 drum, Wireless Remote, compressor, rebuilt turbo, serviced, nice machine for age

2021 Morbark 30/36 whole tree chipper -1884 hours -Cat Engine -Pintle hitch towed -Extra sets of knives and parts -Factory Engine warranty remaining PRICE REDUCED!!!!!!!

-400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back

1994 Morbark 23WCL 23" disk chipper With loader Good condition Includes: extra (new and used) knives, counter knives, & top plate

2009 Morbark 30/36 Tree Chipper -1045 Original hours -C13 440 HP -A/C blows cold -Clean tight chipper

1997 Morbark Model 20 Whole Tree Chipper, 250 HP Diesel Engine, Injection Pump installed over 300 HP , 3900 Hours are Showing, Heat in the enclosed cab, New Starter, New Tires and Brakes, 10 sets of extra knives, Ready for the Woods. H 11’5” W 8’6” L 22’9” 26,540 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Morbark Model 23 WCL Whole Tree Chipper, Caterpillar 3412 1000 HP Twin Turbo Engine. Has 9,000 Original Hours, Heat and Ac, AC needs a Charge, New Computer, New Injectors, All Cylinders recently Repacked, All New Hoses, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Morbark 1821 Brush Chipper, Engine Ford 170HP Gas Engine, Hydraulic Winch, 2-1/2" Pintle Hitch, UCC Lighting, ONLY 187 Original HOURS , Ready for Work. Height 8'11" Width 7'3" Length 18'1" Gross weight (approximate) 8,900 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1998 Morbark 2400 Chipper, ONLY 1800 Original Hours, Perkins 185 HP Turbo Diesel Engine, Hydraulic Tongue Jack, Hydraulic Lift Assist Cylinder, Twin Disc SP 211 Clutch, Tires are at 50%, In Excellent Condition. Two Owner Machine, Ready for Work. Weight: 15,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Morbark 50/48 Whole Tree Drum Chipper. 11,000 hours on a rebuilt 3412 CAT engine with 760HP, Auto Feed, Fire Suppression, Radio Remote and Tether cord. Machine was repainted. Length 40'8.25" Height 12'6" Width 9'9" Gross Weight (approx.) 72,120 lb