Biomass Equipment For Sale

2022 Blue Diamond 72"" Skid Steer Brush Cutter - Severe Duty Open Front - 72” cutting width - 10"" Cutting Capacity - 4 double-sided blades - 200 CC Piston motor - 27-35 GPM Flow Range - 1” thick blade carrier with serrated edge - Visible pressure gauge to monitor workload - Bolt-on wear shoes to adjust height - Easy machine entry - 1 Year Warranty Call Quality Equipment & Parts for more information!

2022 Blue Diamond 72"" Skid Steer Brush Cutter - Extreme Duty Open Front - Versatility meets power and performance - Mows both grass as well as trees with ease - Purpose built 160CC hydraulic motor - Low flow / 16-26 GPM flow range - 3.5"" forged one piece drive spindle - 13"" x 1"" flange with 10 bolts connecting the blade carrier - 4 double-sided blades - 3/4"" thick blade carrier - 6"" diameter cutting capacity - Dual-direction cutting - No Case Drain required - Standard skid-steer coupler - 1 Year Warranty Call Quality Equipment & Parts for more information!

2022 Blue Diamond 72"" Skid Steer Brush Cutter - Extreme Duty Closed Front - Versatility meets power and performance - Mows both grass as well as trees with ease - Purpose built 160CC hydraulic motor - Low flow / 16-26 GPM flow range - 3.5"" forged one piece drive spindle - 13"" x 1"" flange with 10 bolts connecting the blade carrier - 4 double-sided blades - 3/4"" thick blade carrier - 6"" diameter cutting capacity - Dual-direction cutting - No Case Drain required - Standard skid-steer coupler - 10"" deck clearance - 1 Year Warranty Call Quality Equipment & Parts for more information!

MLS Number 12171481 BM&M 12X20 Chip Screen Rebuilt with new bottom pan Rebuilt motor and new belts Main bearing tested good Screen size buyer option

Wood-Fired BOILERSMITH Boiler fitted with CHALLENGER Cumbustion Unit;Complete with the following major components and features: -- 250 PSIG design pressure. -- BOILERSMITH Boiler Model HRT2H8-2600SF-XW-250 with 2600 Sq. Ft. boiler surface area. -- Fuel can vary in moisture up to 50%. (Boiler HP is reduced as moisture increases.) -- Fuel feed Auger with Variable Frequency Drive. -- Fire-Tube Boiler with integrated Air Blast Tube Cleaning. -- De-Ash Augers. -- All Electrical Controls and starters. -- All mechanical/ electircal engineer's drawings.NOTES: &#9679 Removed and ready to load onto two trucks, 38,000 and 42,000 pounds. &#9679 15,000 to 16,000 pounds per hour steam if burning wood pellets. &#9679 No building included but same building can be purchased from STAR.

Biomass Boilersmith Boiler 400hp 250 psi. barely used, 90 percent life expectancy All inclusive,boiler, Biomass unit, ash conveyors, all input/ feed conveyors, EPA approved pollution mitigation system, Electrical components. Was designed to have a Co-Gen unit added

BRYAN - CL 240-W-GI, ...Hot Water Tube BoilerThis Boiler was taken out of an Office Furniture Factory where it was used to heat drying tunnels to a temp of 120 F.Disconnected and in storage for 1-1/2 years.Details & Specifications:Model: CL240-W-GIInput MBH: 2,160/1,080Output MBH: 1,728BRYAN #: 971292Relief Valve Setting: 50 PSIGHeating Surface: 287 sq/ftMAWP Water: 60 PSIGNational Bond #: 41033Canadian Reg #: E6190.25Gas Data:Natural GasMax Input CFH: 2,160Min. Input CFH: 1,080Min. supply Pressure: 7 In. WCMax supply pressure: 14 In. WCManifold pressure in WC: 3.5Orifice size: DMS 29

Bryan Low Pressure Boiler, Fuel Oil fired

Complete Rotary Drying System - Aeroglide twin 13' X 60' natural gas fired rotary dryers with cooling drum - Based on dual 13' X 60' triple-pass rotary drum dryers with trunnion and drives with motors - including 70 million btu natural gas burners - max thermal output of 42.200.000 kj/h - discharge cyclone, multi-clones, fans with motors, stack, all relating ducting and steel structure - These dryers are fired with natural gas or propane - Main cyclone at discharge of dryer has 3.66m diameter, secondary multicyclones (8/dryer) are 1.07m diameter each, stack is 37m above grade - Volumetric airflow rated 30.68 cubic meter/second - Equipment plant drawing, manuals and blueprints available when a deposit is made - We priced out a new system using all the separate pieces at $6.8million dollars. Our price is $2.5 million standing in place. We can remove loaded on a truck for $250,000. Call 800-459-2148 for more info.

CABLE MANAGEMENT - CMSHSS-100, ...Single Shaft ShredderSpecifications: --Rotor Speed: 60 - 80 RPM --Rotor diameter: 15-3/4″ --Rotor blades: 45 + 4 --Static blades: 2 + 2 --Ram travel: 32″ --Discharge height: 52″ --Screen diameter (holes): 1-1/2″ --Motor power: 100 HP --Hydraulic Power: 5 HP --Chamber size: 42″ x 39″ --Overall dimension: 110″ x 78″ x 82″ --Approx. weight: 9,500 LbsIncludes: Spare Parts

CAM-WOOD WX-1502H Horizontal GrinderFeatures Impact resistant tooling with excellent wear capability. Specifications: -- Horizontal feed, 20 HP - 1,750 RPM drive motor; 15-3/8" x 2-3/8" infeed chute; 8" dia. air discharge. -- Equipped with: -- (18) rotary cutter sets with cutter head angle to allow aggressive cutting rates and high-speed shredding of waste; (4) stationary cutter sets; 10" dia. rotor; 575 RPM. -- The shaft rest for the cutter head is constructed by round hollow with special angle for cooling during production. -- Complete with: -- Removable screen for easy cleanup and chip size changes from standard 1/2". -- Includes: -- Operators' & Parts Manual and covered by (1) Year Warranty.

CAM-WOOD WX-4150 Vertical Grinder-ShredderImpact resistant tooling with excellent wear capability. Specifications & features: -- Vertical-feed Chute, 50 HP - 1,750 RPM drive motor; 41" x 12" infeed chute; (12) rotary cutter sets with cutter head angle to allow aggressive cutting rates and high speed shredding of waste. -- The shaft rest for the cutter head is constructed by round hollow with special angle for cooling during production. -- Complete with: -- Removable screen for easy clean up and chip size changes from standard 1/2". -- OutPut: -- 1,300 - 1,800 Lbs/Hr, depending on material and moisture content. -- Includes: -- Operators' & Parts Manual and covered by (1) Year Warranty.

CAM-WOOD WX-1504HC Horizontal Grinder w/ConveyorImpact resistant tooling with excellent wear capability. Specifications: -- Horizontal feed with (2) 1 HP infeed roller motors; 20 HP - 1,750 RPM drive motor; -- 15-3/8" x 4" Infeed chute; 8" dia. air discharge.Equipped with: -- (18) Rotary cutter sets with cutter head angle to allow aggressive cutting rates and high-speed shredding of waste; -- (4) Stationary cutter sets; 10" dia. rotor; 680 RPM. -- The shaft rest for the cutter head is constructed by a round hollow with a special angle for cooling during production. Complete with: -- Removable screen for easy clean up and chip size changes from standard 1/2". Includes: -- Operators' & Parts Manual and covered by (1) Year Warranty.

CAM-WOOD WX-1510 Vertical Grinder-ShredderImpact resistant tooling with excellent wear capability. Specifications & features: -- Vertical-feed Chute, 10 HP - 1,750 RPM drive motor; 15" x 11" infeed chute; (6) rotary cutter sets & (2) counter-knives with cutter head angle to allow aggressive cutting rates and high speed shredding of waste. -- The shaft rest for the cutter head is constructed by round hollow with special angle for cooling during production. -- Complete with: -- Removable screen for easy clean up and chip size changes from standard 1/2". -- OutPut: -- 300 - 900 Lbs/Hr, depending on material and moisture content. -- Includes: -- Operators' & Parts Manual and covered by (1) Year Warranty.

2022 Carlton 2015 Tree Chipper, Deere 140HP Diesel, Hydraulic Winch.

2015 Carlton SP7015 Stump Grinder with 1,400 hours. 66HP Kabota Diesel Engine, Blade, 4 x 4 with a trailer. Weight 3500 Lbs. Length 10’ 6” Height 52” Width 35” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

CAROLINA BULK BAG FILLING MACHINECarolina Conveying filling stations are used to safely and efficiently load bulk bags. A filling head with an inflatable seal is used for dust-tight loading of the bulk bag, and bolts to the adjustable height framework. The inlet to the filling head is connected to the customer’s equipment above via a flexible tube. The bag spout is secured to the outlet with an inflatable seal. The seal inflation is controlled by a manual on/off spool valve, which pipes air to the unit. A cavity around the outerperimeter allows displaced air and dust to exit the filling head through a dust extraction nozzleSpecifications & Features: -- Rated for 5,000 Lbs, Bag fill up to 4000 Lbs. -- Platform size 48" x 48" -- Bulk Bag Filler Stations are used to safely and efficiently load bulk bags. -- A filling head with an inflatable seal is used for dust-tight loading of the bulk bag, and bolts to the adjustable framework height. -- The inlet to the filling head is connected to the customer's equipment above via a flexible tube. -- The bag spout is secured to the outlet with an inflatable seal. -- The seal inflation is controlled by a manual on/off spool valve, which pipes air to the unit. -- A cavity around the outer perimeter allows displaced air and dust to exit the filling head through a dust extraction nozzle. -- Support frame with adjustable rack. -- Support arms; Four adjustable height arms for loop-type bags. -- Inlet 8" round flange, ASA 150 Bolt hole pattern. -- Inflatable seal; White seamless gum rubber tube. -- Dust spigot 3" o.d. tube - 71 -- Weight platform with Digital Scale - 84 -- Output for digital readout is included - 7185

2020 CBI 5800BT, Cat C18 755HP with 2000 hours, Radio Remote, Magnetic head pulley. Weight: 69,000lbs - 73,000lb Width: 8’ 4” Length: 38’ 11” Height: 12' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 CBI 5800 Horzontal Grinder with 728 hours on a Cat C-18 Engine with 675HP includes Colorizer and spray bar. Weight 69,000lbs - 73,000lbs Length: 38’ 11” Width: 8’ 4” Height: 12' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

CAT C18 TIER 4F DIESEL ENGINE (765 HP) AUTO REVERSING FAN SYSTEM 48" WIDE x 40" DIAMETER HAMMERMILL FORGED DRUM OFFSET HELIX ROTOR 6" ROTOR SHAFT 48" WIDE X 30" DIAMETER TOP COMPRESSION FEED ROLL LIVE FLOOR W/4 WDH-120 CHAINS, 4 STRANDS WIRELESS REMOTE AND TETHERED REMOTE 48" DISCHARGE STACKING CONVEYOR 15'4" DISCHARGE HEIGHT UNDERCARRIAGE TRACKED MAGNETIZED END PULLEY W/COLLECTING SLIDE TRAY CBI MDS - METAL DETECTION SYSTEM