logging Equipment For Sale

COMPLETE 843K REAR AXLE. PART NUMBER YZ19477. AXLE IS DRY AND DOES NOT LEAK AND HAS NOT BEEN BURNED. TAKE OUT PRICE IS $10,000.00 AND REMAN PRICE IS $10,500.00. CALL GAVIN AT 601-410-3416 OR CALL/TEXT TIM 251-366-3237 TO ARRANGE PURCHASE.

2018 John Deere 437E Log Loader -11722 hours -Tight and dry -Tires and lights good -Turn table bearing just done -Delimber -Service every 300 hours

2016 John Deere 843L -10,682 hours -Rubber is good -Tight and dry -Disk in good shape -Serviced every 300 hours

2010 John Deere 643k -7902 hours -Needs Engine wiring harness -Runs and operates -New travel enable and speed valve -New left joystick -New filters -Oil changed -All pressures been checked and adjusted to john deere specs -Throws oil pressure sensor light and fuel sensor light sometimes

2007 John Deere 748H grapple skidder, 12’ wide opening, 250 hours on new JD Factory engine, joystick controller, Excellent Condition, 1st Crank Machine! S/N 1DW748HXC9D633075, heat, air & radio, at least 50% on tires, 30.5 tires x 16.6 (ref #117) – Call Amy (928)723-9449

2003 John Deere 748G II, (1) owner skidder, 10’ grapple w/ winch, 10,000+/- hours, good maintenance on pins & bushings, S/N DW748GX597580, about 50% on tires, tire size 30.5 x 16.5 (ref # 117) - Call Rachel 931-797-6284

Grapple, enclosed cab

2015 John Deere 753J -11400 hours -Uc 90% -Receipts for: -New undercarriage -New swing pump -Swing motor and reliefs on the swing -Hydraulic pumps resealed -Over 60k worth of repairs -Tight and dry

1987 John Deere 640D -12,000+ hours -Rear tires like new -Everything works great -4000 series winch -Great cutting edge -Front end all rebushed

1-AT402812 FIXED AXLE DRIVE SHAFT PARK BRAKE TO REAR AXLE WILL FIT 648L & 648L-II MACHINES

John Deere drive motor.PN#AT374510 $4500 + shipping NEW $16450.00 PLUS CORE Call Gavin 601/410/3416 Call or text Tim 251/366/3237 Located at 467 St. Peter’s st stateline ms 39362

New is 8800 selling for 2500 plus shipping PN#AT379178 Call Gavin 601/410/3416 Call or text Tim 251/366/3237 Located at 467 St. Peter’s st stateline ms 39362

JOHN DEERE 643J COMPLETE CONTROL VALVE PN#AT347730 LIST $11,500.00 TAKE OUT FROM A SALVAGE MACHINE, NO FIRE OR HEAT EXPOSURE. GOOD CONDITION ENDS CAPPED. READY TO INSTALL PRICE REDUCED TO $3500 TEXT Tim 251-366-3237 or GAVIN 601-410-3416 NO TEXT PLEASE

643J-843J HYDROSTATIC DRIVE PUMP/AT374509- CALL GAVIN AT 601-394-7796 OR TIM 251-366-3237

ARTICULATION DRIVESHAFT TRANS TO PARK BRAKE SN#-685564 1-AT409576 $1250

648L cylinders take out 2- BOOM CYLINDERS AHC20460. $1750.00 EACH 1- BLADE CYLINDER AHC13134 low ser number only

2016 648L SKIDDER PARTS MACHINE LOTS OF GOOD PARTS STILL AVAILIBLE ON IT CALL GAVIN @601-410-3416 OR TIM @251-366-3237 FOR MORE INFO.

AT208006 fan for 643J-843J cutters BRAND NEW FROM JOHN DEERE

REMAN HALF AXLE WITH PLANETARY GEARS SWEDA 20 HOLE AXLE HEAVY DUTYPN# YZ120232 REMAN $5000.00 CALL GAVIN AT 601-410-3416 OR CALL OR TEXT TIM 251-366-3237

1996 Deere 540E Cable Skidder with 18,500 Hours, No Heat and Ac in Cab, Center Section is Tight, Tires are 18.4 x 26 Chains around Ready for the Woods. Operating Weight 21,900 lb Overall Length 19.95 ft in Overall Width 9.16 ft in Height To Top Of Cab 9.88 ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.