logging Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 44 of 99
1966 Results Found
Sort By 
Recently Added Items
2017 Tigercat 625E
$220,000
2017 Tigercat 625E
2021 Barko 595B
$145,000
2021 Barko 595B
2014 Caterpillar 545D
$68,900
2014 Caterpillar 545D
Tigercat 718
$20,000
Tigercat 718
$ 107,500

Has been thru our shop. SWEDA axles with winch. Replaced tires, pins & bushings as needed. Fixed leaks. Ready to work. Available.

 Moncks Corner, SC
W & W Truck & Tractor Inc.
843-312-1018
Call

$ 139,900

2012 Deere 703JH Harvester, with Waratah HTH622B head,14,020 frame hours. Main saw motor resealed July 2021, new computer on head December 2021, Main seal on motor done December 2021, All new bushings on grab arms April 2022, grab arm cylinders repacked 2022, New encoders on saw and diameter. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 La Crosse, WI
NEF Equipment
855-251-2648
Call

$ 34,900

John Deere 640 Skidder Dual arch Winch 18.4x32 tires New injection pump New hoses 4 way trail blade Center has minor play Runs and shifts good Woods ready

Mitch Stevens
828-773-6986
Call

$ 129,500

2010 John Deere 753J, 11,890 hrs., Quadco OFH 360 20B head, Deere 6068 Turbo Diesel engine, 2 spd. Trans., undercarriage roughly 40% , 24" single grouser pads, EROPS, Heat/AC, Radio, Joystick Controls, preheater, $129,500

 Greenland, MI
Pats Heavy Equipment
906-883-3800
Call

$ 5,250

Good condition. Tong tips pushed in (minor) rest is clean structurally and dry when removed.

Forestry First
855-588-7871 ext:1
Call

$ 98,500

2014 John Deere 959K Feller Buncher -14409 hours -Full Undercarriage 4500hrs ago -Head Rotec Bearing 2500hrs ago -New Engine at 7500hrs -Head was swapped 2000hrs ago -New Grab Arm on head Machine is woods ready

Josh Digirolamo
828-302-7264
Call

$ 186,000

2019 John Deere 643ll -5000 hrs -Brand new teeth -Tight and dry -Working everyday hours will go up clean machine

Josh Digirolamo
828-302-7264
Call

$ 23,900

John Deere 640 Cable Skidder Runs and operates

Mitch Stevens
828-773-6986
Call

$ 23,900

John Deere 648E Skidder Single arch boom No grapple Used as cable machine Runs and operates

Mitch Stevens
828-773-6986
Call

$ 325,000

2020 John Deere 748L II Skidder Only 1316 hours Dual arch Winch 35.5 tires are good Using daily Nice low hour skidder

Mitch Stevens
828-773-6986
Call

Call for Price

2014 John Deere 648 H, Very nice John Deere skidder tight dry AC works winch works 11,000 hours very nice skidder for its age 334-518-9900

 Maplesville, AL
Smith Trucking & Equipment
334-518-9900
Call

$ 35,900

2014 John Deere 643K Feller Buncher 8600 hours Bunching head with 350 hours 30.5 tires at 40% AC Machine is tight Has a short somewhere Have to unhook battery to turn machine off and saw wont engage

Mitch Stevens
828-773-6986
Call

Call for Price

2015 John Deere 437D

T & L Equipment Sales
570-889-3636
Call

$ 360,000

2018 John Deere 859m -5950 hours -2900 Vl intermittent head -New disk on head -Tight and dry machine -1 Owner machine

Josh Digirolamo
828-302-7264
Call

$ 255,000

2020 JOHN DEERE 748L II SKIDDER 2800 Hours Series II Dual Arch Winch

Keith Comeau
704-929-9122
Call

Call for Price

2016 John Deere 437D

 Maplesville, AL
Smith Trucking & Equipment
334-518-9900
Call

Call for Price

2015 John Deere 748H

T & L Equipment Sales
570-889-3636
Call

$ 30,000

1994 John Deere 648E -Rebuilt about 1000 hours ago -Frame hours unknown -No leaks -Winch operates good and cable is in good shape -Tires have about 30% -Chains are at about 80% -Ready to work

Josh Digirolamo
828-302-7264
Call

$ 177,500

2016 John Deere 848L dual arch grapple skidder, 7,000 hours. Operating Weight 49348.3lb Overall Length 333.4in Overall Width 140.7in Ground Clearance 23.78in Wheelbase 156.5in Tong Opening At Tips 12.42ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Keene, NH
NEF Equipment
855-251-2648
Call

$ 100,000

2006 Deere 1010D Forwarder. Double Bunk, Engine was rebuilt and has 3,000 Hours, 23,000 Frame Hours, Includes Chains and a Set of Tracks, Boggies are Good, Has Cold Start 600 tires, Enclosed Cab with Heat and Air Conditioning. Operating Weight - 4wd 27,557.8 lb Length 24.41ft in Wheelbase 12.21ft in Width Over Tires 8.5ft in Height To Top Of Crane 12.17ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 La Crosse, WI
NEF Equipment
855-251-2648
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved