Equipment For Sale

HOMAG AMBITION 2274 (KAL 370/6/A3) EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Specifications: Working Capacity: Coiled stock min/max Edge thickness 0.3 - 3 mm (0.011. - 0.118"), Strip material min/max Edge Thickness 0.4 - 1 mm (0.016 - 0.039"),Panel stock min/max thickness 8 - 60 mm (0.472" - 1.574"). Panel Over-Hang 30 mm (1.18").Minimum workpiece width: 2.36" (60 mm) with workpiece thickness ≤ 22 mm) & 4.13" (105 mm) with workpiece thickness > 22 mm). -- Cleaning Agent Spraying Units:Top/Bottom spraying device prior to workpiece pre-milling. Designed for applying a separating agent, for easier cleaning of any residual glue on the panel. -- In-Feed Fence: Pre-heated manually adjustable in-feed fence with digital indicators. -- Pre-Milling Station:(2) 2.2 HP (3.0 kW) - 150 Hz, 9,000 RPM vertical jointing spindle motors; equipped with panel blow-off device and SIKO digital counters for adjustments. -- Panel Pre-Heat Unit: Quartz lamp for heating substrate edge before glue application. -- Edge Magazine:A multi-purpose 2-coil magazine expands capability by running coiled material & strips. Maximum roll diameter: 400 mm & 830 mm.Magazine height adjustment allows for greater usage of varying panel heights by raising and lowering the magazine table, allowing the operator to center the panelon the edgebanding. -- Gluing System Homag Quickmelt: QA 3 - Quick Melt Overhead Unit & heated roller applicator digitally displayed thermostat for both upper and lower unit.34 mm Dia. Glue Roller allows for excellent control of temperature for optimum bonding results with individual adjustment for leading and trailing glue gatesLower melting unit equipped with automatic glue level control. Melting capacity: 12 kG/Hr (26 Lbs/Hr). Ultra-fast five-minute (5) heat-up time. -- Pressure Section: Programmable (Servo), automatic pressure zone adjustment, (1) large 150 mm dia. driven & (4) 70 mm dia. idle rollers, pneumatic pressure control depending on edgebanding material used.Workstations: -- End Trimming Unit:(2) 1 HP (0.8 kW) - 200 Hz, 12,000 RPM Motor ea. to cut excess edge on the front & back of the panel; pneumatic adjusting from chamfer to straight snip. Programmable (Servo). -- Rough/Pre-Trimming Unit:(2) 0.55 kW 0.74 HP (0.55 kW) - 12,000 RPM Motors, tilting range +/- 1° & counter-rotating to machine feed to prevent blowout & .Height adjustment synchronized with the top pressure-beam .With digital counters. -- Profile/Bevel/Corner Rounding Unit:(2) 0.54 HP ( 0.4 kW) - 12,000 RPM, Multi-function Motors to fine trim the edge overhangs at the work-piece upper & lower edge, as well as trimming around the front & rear vertical edge.By way of the machine control, this unit adjusts between a radius and a chamfer without a tooling change.Max. feed speed 20 MPM (65.6 FPM) when using "Corner Rounding Unit". -- Profile/Bevel Scraping Unit:Top & bottom for thick PVC/ABS, electro-pneumatic positioning & pneumatically activated. Pneumatically-controlled

HOMAG KAL 310/4/A3/S2 EDGEBANDER (W/PRE-MILLING): -- Specifications:Working Capacity: 0.3 - 3 mm Edge thickness cap., min. panel width 22 mm; max. panel thickness 60 mm; Dual speed -- Equipped with: Pre-Milling Unit 3481: (2) motors, 3 kW, 9000 RPM each, pneumatic controlled/jump milling spindles and adjustable, manual with digital indicator in-feed fence. -- Hot Melt Glue System "QA 34" Quick-Melt Unit: with heated glue roller; -- Edge Magazine Unit 2456: Automatic (2) coil/strip magazine, coils 0.3 - 3.0 mm. -- Pressure Section: Pressure roll section with (3) rollers, (1) large dia. driven & (2) idle rollers; with pneumatic pressure control for straight edges -- HOMATIC "NC 21" Power Control System: Controller operates in Windows-XP environment; Keypad w/LCD display, fault diagnostic, etc.; diagnostic analysis from HOMAG service support via Modem. -- Workstations:End Trimming Unit: (2) motors, 0.18 kW - 12,000 RPM each, to cut excess edge on the front & back of the panel. -- Flush/Pre-Trimming Unit 3201: Top & bottom trim station, 0.55 kW - 12,000 RPM +/- 1° angle adjustment, manual positioning with digital counters. -- Fine/Bevel Trim Unit 3216: (2) motors 0.4kW - 12,000 RPM each, manual positioning with digital counters -- Profile Edge Scraping Unit: with electro-pneumatic adjustment -- Buffing Unit 4402: Top and bottom with oscillation. (2) motors, 0.25kW, 2850 RPM -- Complete with & Features:Electronic DC brakes on all trim motors; sound cabin for all workstations. -- Adjustable outboard panel support with swing out arms for up to 800 mm. -- 80 mm Feed track pads; manually adjusted V-groove belt on top pressure beam and Sound/Safety enclosure over workstations. -- Actual Model is HOMAG KAL 310/4/A3/S2Note: This machine has a new display and a new back up one as well!

Honeyville bag house, includes filters, very good condition

7' x 23' Honeyville Bag House Dust Collecting System with Blower & Stand 86 10' Tubes, Ready to Ship.

Honeyville 32" Blower with 12" in & 12" Out No Motor.

50' Honeyville Bucket Elevator

1986 HOOD 24000 LOADER/SLASHER. NEW PINS AND BUSHINGS. MOUNTED ON 2001 MACK WITH 350 ENGINE AND 9 SPEED TRANSMISSION. READY TO WORK. FINANCING AVAILABLE WITH NO MONEY DOWN AND 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT. FINANCING OPTIONS AVAILABLE FOR MOST CREDIT TYPES. WWW.GRANITEHE.COM

2012 HOOD 24000 HEEL SLASHER GOOD TIRES CLEAN CAB RUNS GREAT FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

Mitsubishi engine, good hydraulics, this machine is in operating condition. Call 440-983-9481 for more information.

2015 HOOD 20000 LOG LOADER Hood 20000 One Owner 5800 Hours Delimber Saw Hydraulics

2015 Hood 20000, 10,000 hrs., well maintained machine, regular slasher bucket, $89,500

2001 Hood 24000 loader -unknown hours -Loader is continuous rotation -Live heal set up to run circle saw -50/52 Rotobec bucket Needs trailer

Hood 7000 log loader with trailer. Trailer is (Bill of Sale only)

Hood 7000 Knuckleboom Log Grapple Good Pump Included

Feeder hopper with 85ft Superior belt conveyor, Mclanahan cross belt sampler 24" x 85' Transfer Superior Conveyor with 15hp Motor running at approx. 400FPM, 100TPH, @60PCF Material. Comes with McLanahan 24" cross Belt Sampler: LHD 18" Wide Enclosure 2-7/16" Dia Shaft, 6" Wide Cutter. 260k tons lifetime use and hopper conveyor. Sampler available separately.