Equipment For Sale

2011 INTERNATIONAL 7400 BUCKET TRUCK 38,000 MILES 3,800 PTO HOURS 6X6 ALTEC A77T E93 TELESCOPIC ELEVATOR BUCKET 98' WORKING HEIGHT 10,000 LB WINCH DIFF LOCK RECENT TIRES VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

International Diesel engine. In frame. 120 HP Call 800-459-2148 for more info.

INTERNATIONAL TITAN-60-EC Full Eject Horizontal Baler with ConveyorSpecifications: -- Cylinder: 8" -- Main motor: 20 HP -- Feed opening: 58"; x 35"; -- Bale Size: 60"; x 48"; x 30"; -- Feed conveyor width: 48" -- Ram face pressure: 3,000 PSI -- Total force: 150,800 Lbs -- Cycle time: 32 Sec (14 Sec short stroke)Equipped with: -- Programmable controller with Ethernet -- Conveyor controls and conveyor hopper

INTERNATIONAL TITAN 6-EC Closed Door Horizontal Baler with ConveyorSpecifications: -- Cylinder: 8"; -- Motor: 20 HP -- Cycle time: 32 Sec Cycle Time -- System pressure: 3,000 PSI -- Total force: 150,800 Lbs -- Ram face pressure: 87 PSI -- Feed opening: 58"; x 35"; -- Bale size: 60"; x 48"; x 30"; Equipped with: -- Feed conveyor: 48" wide -- Programmable controller -- Ethernet connection

Dump Truck, Rollover Cover, CB Radio

International S2500 Log Truck 13 speed Lift axle Dayton wheels 11-22.5 tires are good 21' bed Work ready VIN 1HTZPJUR5GHA17203

Farmall International gas engine. Starts good, runs good Been used on circular sawmill and worked on sawmill till 6/7/17. Includes: Tank heater, Muffler, Electric fuel pump, Comes with 8in 5-Groove C Belt. Does not include battery. Has a new water pump. Recently adjusted valves and rebuilt carburetor. Call 800-459-2148 for more info.

1998 International Paystar Tri Axle Log Truck, 8 Speed, M11 Engine, 20 Front axles, 46 Rears, Runs Good

INTERNATIONAL - AT-4843-850-60, ...Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8" -- Opening size: 60" x 46" -- Main motor: 50 HPEquipped with: -- Control panel -- Oil Cooler: Air-Over-Oil -- 10' Bale Run-Out Table -- High temp/low oil level shutdown

2007 International Paystar 5000 -52000 original miles -ISX 15l Cummins -A.C works but needs recharge -Boom length is 125ft -Two man bucket -Back three axles have true air lockers -Good tires and lights

1985 Internation DT 466 Dump Truck Work Ready

2012 Prostar w/ Max Force Motor

2014 International Pro Star tandem axle, sleeper cab tractor, 40" sleeper, Maxx Force 13; 430 hp., Jake Brake, Eaton Fuller 10-speed trans., air ride, 11R/22.5 steer tires, 295/75R 22.5 drive tires, aluminum wheels, wet kit, 385,563 miles, serial number 3HSDHSJR9EN763708

2007 Pro Star Limited with Sleeper Cab

2007 Pro Star Limited with Sleeper Cab

IBC Horizontal Auto Tie Baler IBC 4343 X 8 – 50 - 63 --Model AT-4343-8-50-63 --Type Auto-Tie Baler --Motor 50HP --Cylinder Bore 8"; --Bale Size 43"; x 43"; x Variable --Manufacturing Date 2009

INTERNATIONAL BALER - IB-4430-50, ...Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8". -- Ram force: 125,660 Lbs. -- (6) Tension cylinders: 4" Bore. -- Feed opening: 42" x 50". -- Main motor: 40 HP.Equipped with: -- Shear blade with adjustable striker bar. -- Regin hydraulics. -- LED Indicators for bale functions. -- Autostart electronic beam. -- Oil cooler. -- Replaceable T-1 floor.NOTE: Ram needs some repair.

IBC Horizontal Closed Door Baler Model NA-1296A-48 -- 50 HP Motor --10″ Main Cylinder --Bale Size: 30″ x 45″ x 60″ --Hopper Size: 57″L x 45″W --Platen Pressure: 134 PSI --System Pressure: 3,000 PSI --Total Force: 235,620 lbs --New cylinder installed approximately 6 months ago

INTERNATIONAL - NA-1295HD, ...Closed Door Horizontal BalerSpecifications: -- Bale size: 72" x 44" x 36" -- Main cylinder bore: 8" -- Total force: 113,000 Lbs -- Ram face pressure: 71 PSI -- Feed opening: 42" x 50" -- Cycle time: 30 sec -- Main motor: 30 HPFeatures: -- PLC Control -- Bale table -- Shear bar -- Heavy-duty welded construction -- Heavy-duty hydraulic system -- Easy-to-operate controls

INTERNATIONAL - 1272-HD, ...Horizontal Closed BalerNOTE: Complete with Fluffer!SPECIFICATIONS: -- Bale Size: 72" x 30" x 36" -- Main Motor: 30 HP -- Cylinder: 7" -- Feed Opening: 50" x 28" -- Total force: 86,500 Lbs -- Cycle Time: 23 Sec -- Shipping weight: Approx. 8,500 LbsFeatures: -- Single Fluffer -- Hopper is included