Equipment For Sale
10494 Results Found
$ 155,000
20.5 Tires, 3 Spool, Aux Hydraulics, Aux Steering, Cab w/ AC, Front Diff Lock, General Purpose Bkt, n/a, Ride Control, ROPS, Tool Carrier
$ 13,900
John Deere 540 Skidder 80 hours on rebuilt engine Bought new around 1979 Center section is good Has a leak or two Runs and operates
$ 36,000
1979 John Deere 540B Skidder Rebuilt 4276 motor New gasket and seal in reman trans Rear ends checked out good New hydraulic pump, radiator Rebuilt shift valve, clutch valve, steering valve and steering and blade cylinders Winch rebuilt. New U joints, center drive shafts, 18.4 x 34 tires. Front 45%. Rear 20%. New shift cables and blade cables Fresh paint
Call for Price
1979 John Deere 540B Deere with a 4 Cylinder Engine that has been completely rebuilt Currently has 5 hours , Transmission was Resealed, C1, C2, Brake Packs & Valves, Rebuilt Water Pump, Rebuilt Steering Valve, Rebuilt Rotary Valve, New Seat, Rebuilt Diff. Lock, Repacked Steering and Blade Cly. Rebuilt winch. 18.4x34 Tires Front Tires are 75%to 80% Rear tires are 40% to 50% Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 100,000
2020 John Deere 85G -Bought new one owner -Very well maintained -Everything works -1700 hours -Steel rails -Rubber pads -Hydraulic thumb -36” bucket -19k lb machine.
$ 129,500
18" Pads, 36" Bucket, Aux Hydraulics, Cab w/ AC, Hydraulic Thumb, Medium Arm, ROPS, Rubber Tracks, Standard Boom
$ 69,200
2015 John Deere 85G Mini Excavator with 3,052 hours. Operating Weight 17,952.3 lb Overall Width 7.62ft in Transport Height - Maximum 8.83ft in Transport Length Mono Boom 20.9ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 125,000
24" Pads, 34" Bucket, Aux Hydraulics, Blade, Cab w/ AC, Hydraulic Thumb, Long Arm, Standard Boom, Standard Track
Call for Price
2014 John Deere 703JH Processor -14796 hours -Waratah 622B -Head is in great shape -Uc is in great shape -Tight and dry Ready to work
Air Conditioner, Forestry Package, Fire Suppression System, ProHeat Engine Coolant Heater, Waratah HTH622B 26 in Rotating Link Harvesting Head, Computerized Measuring, Steel Feed Rolls, Butt Saw, 24 in Single Grouser Track Shoes, High and Wide Undercarriage, Rock Guards.
2010 John Deere 703JH w / 622B Waratah Head, Hours 11,859, Updated Access Computer System, Undercarriage @ 65%, Dry machine Ready for the woods, $89,500
Call for Price
2014 John Deere 703 JH Wood Processor with a 622 B Warata 3/4 chain main saw and a 404 top saw.Very clean, no leaks and no dents! Just over 10,000 hours working daily. Length: 27 ft 10 in Width: 9 ft 6 in Height: 11 ft 4 in Weight: 52,140 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
1983 Deere 540B Grapple Skidder, Winch, Tires are 23.1 x 26, Ring Chains Front, Single Double Ice Chains Rear, Hour Meter reading 6,300 hours, Center Section is Good, Runs very well no doors. Ready for the Woods. Operating weight 18,675 lbs Length 242.5 inches Width 103.9 inches Height (ROPS) 115 inches Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 31,900
1984 Deere 540B Grapple Skidder, Winch, New Rear Tires, 80% Tires in Front, New Maine Pump, Hydraulic Clutch, Flywheel Replace 4 Hours, New Imput Shaft in Rear. Complete Engine Rebuilt 20 Hours Ago, new fuel tank and new axle bearings and seals. Open Cab Centers Good. Operating weight 18,675 lbs Length 242.5 inches Width 103.9 inches Height (ROPS) 115 inches
$ 34,000
1983 Deere 540B Grapple Skidder, Factory Deere Grapple, Winch, Needs Drive Shaft, New Shaft Cables, Doors Available, Tires are 23.1 x 26 Good Shape, Good Centers, Newer Pump, Centers Good, Ready for the Woods. Operating weight 18,675 lbs Length 242.5 inches Width 103.9 inches Height (ROPS) 115 inches Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 24,900
John Deere 540B Skidder Single arch Winch Rebuilt engine about 700 hours ago 28Ls Runs and operates good
$ 20,500
John Deere 540B Skidder, tires 23 1 x 26 all matching 50%, winch completely rebuilt, seals, clutches, winch band all new. Steering cylinders and blade cylinders packed, new turbo, new winch shaft, all hydraulic filters and oil filters changed, new hydraulic oil and new motor oil. $20,500 336-957-6767
$ 12,500
$ 85,000
2019 John Deere 437E, CSI 264 Delimber w/ Good Knives, Hyd Lef Crawler Trailer w/ Susp, New Turn Table Bearing, Clean Loader, $85,000 - Contact Bruce or David at 270.265.3770