Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 203 of 479
9564 Results Found
Sort By 
$ 116,000

2020 DEERE 650K LGP Crawler Dozer 1,954 Hours ONLY 1,954 HOURS Engine: John Deere Powertech PWS 4045 engine Serial Number- 1T0650KKALF388055 Topcon 3DMC2 Automatic Dozer System W/2d Laser System Topcon Hiper VR UHF Base and Rover GPS Stock. Grade Control Ready Enclosed ROPS A/C Heater GPS Delivery is available at the buyer’s expense

Vernon Novak
828-773-6456
Call

Call for Price

John Deere 700H Engine 6068T. Runs excellent

 Amesville, OH
K & D Equipment
740-541-1211
Call

$ 38,000

72" Bucket, Air Ride Seat, EH Joystick Controls, Wide Rubber Tracks

 HOUSTON, TX
Doggett Machinery
225-306-7028
Call

$ 78,000

2 Speed, 84" Bucket, Air Ride Seat, Aux Hydraulics, Cab w/ AC, EH Joystick Controls, Hi-Flo, Reversing Fan, Ride Control, Rubber Tracks, Self-Leveling, Wide Rubber Tracks

 TYLER, TX
Doggett Machinery
225-306-7028
Call

$ 118,000

3.15 m (124 in.) Blade, Cab w/ AC, Hydrostatic Trans, Mechanical Angle Blade, Standard Track

 LUFKIN, TX
Doggett Machinery
225-306-7028
Call

$ 185,000

3.91 m (154 in.) Blade, 34" Pads, Cab w/ AC, Hydrostatic Trans, Lever Steer, Low Ground Pressure, Power-Angle-Tilt

 MONROE, LA
Doggett Machinery
225-306-7028
Call

$ 39,500

72" Bucket, Aux Hydraulics, Cab w/ AC, EH Joystick Controls, Rubber Tracks

 HOUSTON, TX
Doggett Machinery
225-306-7028
Call

$ 25,500

John Deere 435 Knuckleboom with Delimber 2003 model, SN# WC0435X012127. 13,806 hours. Equipped with a 6.8L Power Pack featuring a rebuilt engine and rebuilt fuel pump. Both engine and hydraulics have been recently serviced. Good working condition.

Showcase Equipment
260-250-4645
Call

$ 199,500

2019 Deere 803M Feller Buncher, Deere 360 Hotsaw, 5400 Hours, New UC, New Front Glass. Nice Machine Inside and Out.

 Constantia, NY
Kleis Equipment LLC
315-623-2111
Call

Call for Price

ONE OWNER, WELL MAINTAINED, STILL RUNNING IN WOODS

Forestry First
855-588-7871 ext:1
Call

Call for Price

ONE OWNER, WELL MAINTAINED, PRIMARILY LOADING CHIPPER ONLY, STILL RUNNING, HOURS WILL GO UP

Forestry First
855-588-7871 ext:1
Call

$ 395,900

 Fairfield, ME
NEF Equipment
855-251-2648
Call

Call for Price

2015 John Deere 643K

 Maplesville, AL
Smith Trucking & Equipment
334-518-9900
Call

$ 16,500

JOHN DEERE 643D FELLER BUNCHER 6 CYL DEERE STEERING WHEEL STEER KOEHRING WATEROUS HEAD DRIVE PUMP IS OUT OF IT 28L-26 RUBBER

 Manton, MI
Lutke Equipment LLC
231-824-9505
Call

$ 34,000

1983 Deere 540B Grapple Skidder, Factory Deere Grapple, Winch, Needs Drive Shaft, New Shaft Cables, Doors Available, Tires are 23.1 x 26 Good Shape, Good Centers, Newer Pump, Centers Good, Ready for the Woods. Operating weight 18,675 lbs Length 242.5 inches Width 103.9 inches Height (ROPS) 115 inches Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Albany, NY
NEF Equipment
855-251-2648
Call

$ 215,000

2022 Deere 848L-II Grapple Skidder, No Winch, Engine has 4,000 Hours, Fire Suppression, Espar Heat, Enclosed Cab with Heat and Air Conditioning, Ring Chains on the machine Ready for the Woods. Weight 49,348.3 lb Length 333.4in Width 140.7in Height 27.2 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Keene, NH
NEF Equipment
855-251-2648
Call

Call for Price

2020 John Deere 437E

 Maplesville, AL
Smith Trucking & Equipment
334-518-9900
Call

Call for Price

1989 Deere 648D Grapple Skidder. Winch, New Winch Drive Line, New Reat drive shaft, Rebuilt Parking Brake, New Clutch, Clutch Plate, Transmission went through, Centers are fair, Tires are 28L x 26, Hours are Reading 2,100 on Meter. Length 22 ft 7 in Width 11 ft 0 in Height 9 ft 8 in Weight 24,440 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Colorado Springs, CO
NEF Equipment
855-251-2648
Call

$ 230,000

2021 Deere 1170G with 12,820 hours, Includes a H413 Harvestor Head, Boom just had upgrade to IBC Wires, Upgraded Measuring Wheel, Multi Stemming saw is a super cut 100S Enclosed Cab with Heat and Air Conditioning, Set of Tracks, Clean Machine Ready for the Woods. Operating Weight: 39,242 lb Transport Height: 148.32 in Overall Width: 102 in Base Carrier Length: 285 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Fairfield, ME
NEF Equipment
855-251-2648
Call

Call for Price

2018 Deere 853M Feller Buncher Equipped with a FD55 Cutter Head, 6,600 Original Hours, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 60%, Repacked Cylinders on Head, 2022 Swivel Bearings Replaced, Serviced Recently Ready for the Woods. Operating Weight 67,704lb Overall Width 10.83 ft in Length Of Track On Ground 12.7 ft in Ground Clearance 31 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Atlanta, GA
NEF Equipment
855-251-2648
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved