Equipment For Sale

BALEMASTER - EO-1700: Auto-Tie Horizontal BalerSpecifications: -- Model: 5,250 (EO-1700). -- YMG: 2003. -- Motors: (2) 25 HP. -- Cylinder: 10" . -- Feed opening: 75" x 45". -- Bale: 48" W x 40" H x variable L. -- Touchscreen. -- Air/Oil Cooler. -- Bale table. --Boxes of bale wire included

2-Machine System consisting of BALESTRINI "PICO" Round End Tenoner & BALESTRINI "MICRO.N" Slot MortiserSpecifications -- "PICO" Round End Tenoner: Left & right "twin" tilting tables (one table is always in the cutting position); 14" x 9" tables tilt 0ø - 20ø, both table fences with pin stops for indexing stile and rail doors. -- Fences swivel up to 45ø, each table with vertical pneumatic holddown; 4 HP cutter block motor, 1 HP cutter block rotation motor, 9,000 RPM spindle speed. -- Capacity: 3-15/16" (100 mm) Max. tenon length, 1-3/16" (30 mm) max. thickness, and 1-31/32" (50 mm) max. depth. - Hourly production rate of (600 - 700) tenons."MICRON" Slot Mortiser: Dual spindle system, (1) each side with tables and overhead holddown, 3 HP - 9,000 RPM spindles, (60 - 350) oscillations/Min, 18 mm collet dia. -- Capacity: 4-23/32" (120 mm) Max. length of slot, 3-1/8" (80 mm) max. slot depth, 1-3/16" (30 mm) max. slot thickness. - Hourly production rate of (500 - 800) slots.Note --The PICO has a timing issue and may just need to be adjusted.

BALESTRINI 2 CAP Mortiser --Automatically mortises or bores round holes in chairs or case good --Specifications -- Twin tables with pneumatic holddown clamps, (1) on each side eliminating dead cycle time, 19" long tables tilt left or right 0ø to 20ø. --Equipped with & Features -- 3 HP - 9,000 RPM Spindle motor and 1 HP oscillation motor. -- Spindles are mounted on prismatic guides with adjustable bronze gibs and move by rack & pinion, -- (120) to (240) oscillations/Min; 4-23/32" max. oscillation length, -- 3-1/8" max. depth, 7/8" max. bit dia., 13 mm spindle collet dia.

BALESTRINI C 70 Double Sided Feed Through Copy Shaper;Profiles various chair, table and casegood components from a prepared template. The feed through system allows curved or extremely long parts to be shaped with little or no limitation. Equipped with: -- (2) Vertical shaper spindles, 7.5 HP motor each; 30 mm dia. spindles, 8,000 RPM cutter rotation. -- Reversing rotation by switch for climb cut or conventional cut. Specifications: -- Max. working width 358 mm (14-1/8"), max. working height 118 mm (4-5/8"), min. working length 240 mm (9-1/2"); max. size of cutter blocks 90 mm x 120 mm and up to 3/8" vertical adjustment of heads. -- Part on template block is being shaped by running between spring loaded spindles with copy bearings following the template pattern. -- 1 HP variable feed motor 3 - 26 FPM, hand crank adjustable horizontal rubber infeed & outfeed holddown rollers. -- Machine has (2) 120 mm diameter dust outlets. -- Machine dimensions: 53" x 49" x 43" Machine weight: 2,310 lbs.

BALESTRINI MINI C 2500 DOUBLE SIDED TEMPLATE PROFILE SHAPERSpecifications: -- (2) Offset shaping heads with 10 HP (7.5 kW), 230/460 volt three phase drives. (1 each side) -- Maximum reciprocating length 98" (2500 mm). -- Maximum height 7" (180 mm). -- Maximum width between spindles 8", and shaping heads are staggered for full end rounding. -- 1¼"; Diameter work arbors with 7″ under the nut capacity, and Spindle speed of 8400 RPM -- Hydraulic stroke of 9-3/4″ wide x 110″ long tee slotted work table, with feed speeds of 3 - 49 feet per minute (1-15 m/Min.) powered by 3 HP, 230/460 volt three phase hydraulic pump -- Overhead beam clamp bar with (4) adjustable clamps. -- Push button operator control station.

2014 Bandit 2550 Self Propelled Stump Cutter with Deutz 44 HP Diesel Engine, 1,450 Hours, Tether Cord Remote and Wireless Control, Dual Rear Wheels, Hydraulic Swing Speed, Two Speed Drive, Front Grading Blade, Ready for Work. Width: 35” (89cm) Height: 53” (135cm) Length: 120” (305cm) WEIGHT: Approximately 820kg Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Bandit Beast Model 3680, Caterpillar Model C-18 765 HP Turbo Diesel with Only 2,300 Original Hours , Magnetic Head Pulley on Discharge Conveyor, , Air Compressor, Wireless Remoter Control,and Tether Cord Control, Autofeed Reverse System, Tri-Axle Unit with Hydraulic Tongue Jack with Air Brakes... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Bandit SG-40 Stump Grinder, Rev Wheel, 38HP EFI, Good Running Machine.

2022 Bandit SG40, Low Hours, 38HP EFI Kohler, Tracks, Rev Wheel, Ready to go to work.

2012 Bandit 4000T W/Mulching Head, 2892 Hours, Deere 425 HP Engine, Please Call For More Info

New 2023 BANDIT 1425 14"" Beast Grinder Includes the Following: - Cat C3.4 Engine with 120HP - 25"" Wide Feed - 40 Gallon Hydraulic Tank - 30 Gallon Fuel Tank - Remote Hydraulic Oil cooler & Cover - Standard Bandit Green Paint - NACD Manual Clutch - Radio Kit with Remote - Steel Chain infeed conveyor - Tandem Axle with Air Brakes - Bolt on Aluminum Fenders - Magnetic Head Pulley on Discharge w/ Steel Collector Pan - Non-Adjustable discharge w/ 7' height - Grinder Cutterhead with Rakers - Equipped with double short shingle teeth - Installed: 3"" Diamond Screen - Shipped Loose: 2"" Diamond Screen - Shipped Loose: 4"" Mod Diamond Screen - Shipped Loose: Extra Shingle and Blunt nose teeth 5 YEAR/5000 HR PLATINUM WARRANTY (CAT ENGINES)

2020 Bandit 3680T BEAST Tracked Horizontal Grinder - 1416 Engine Hours - 900 Grinding Hours - Cat C27 w/ 875 HP - PT Fluid Clutch - Remote Control - Automatic Greaser - Automatic Chain Oiler - On-board air compressor - Adjustable Discharge - 36"" Capacity - 30 Tooth Cutter mill This machine was just ran through by the Quality Equipment & Parts Service Department. Bandit dealer of 10 Years. - Infeed Chain: New Headshaft and Tailshaft, new bearings, some new infeed slats - New teeth & rakers on cuttermill - New Screen & Gate - New Poly slide boards on Primary Discharge - New Anvil Bar - On-board air compressor serviced - New grease lines

2006 Bandit 4680 Beast Recycler, Cat 3412 1,000hp with 6,000 hrs, 30 Tooth Mill, Radio Remote, Magnetic Head Pulley Length: 36’ Width: 10’ 11” Height: 13’4” Weight: 93,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Bandit Model 4680 Horizontal Grinder, Tri Axle Machine, Cummins 1000 HP Engine, Hours Unknown, Will have hours soon, Radio Remote Control, 4 " and New 2" Screens for Regrind. Length: 36’ Width: 10’ 11” Height: 13’4” Weight: 93,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2020 Bandit 1425 Horzontal Grinder, Cat 120hp with 73 hours, Radio Remote, Magnetic Pulley, Extra Parts, Excellent Condition. Weight 12,500 lbs Width 98 in Height 120 in Length 288 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

3412 Cat Engine, Hydraulic Clutch, New Remote Control, 3x3 inch Screen with Baffles, 4x6 inch Screen, Good Augers & Infeed Chain; overall good condition, needs some work on Infeed Wheel Call 800-459-2148 for more info.

New Bandit 2290 Tracked Whole Tree Chipper, In Stock for Sale or Rental.

2012 Bandit 3090 Tree Chipper 24" Diameter Capacity 26" x 36" Opening Cummins 600 HP Only 700 Hrs New Drive New Pump New Hoses New Belly Plate New Auto Feed

New In Stock Bandit 3090 Tracked Whole Tree Chipper.